YS/T 281.7-2011 English PDFUS$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 281.7-2011: Methods for chemical analysis of cobalt. Part 7: Determination of zinc content. Flame atomic absorption spectrometry Status: Valid YS/T 281.7: Historical versions
Basic dataStandard ID: YS/T 281.7-2011 (YS/T281.7-2011)Description (Translated English): Methods for chemical analysis of cobalt. Part 7: Determination of zinc content. Flame atomic absorption spectrometry Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H13 Classification of International Standard: 77.120.70 Word Count Estimation: 6,621 Date of Issue: 2011-12-20 Date of Implementation: 2012-07-01 Older Standard (superseded by this standard): YS/T 281.7-1994 Regulation (derived from): ?MIIT Announcement 2011 No.43 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the method for the determination of cobalt zinc content. This section applies to the determination of zinc content in cobalt. Measuring range: 0. 00080% to 0. 0080%. YS/T 281.7-2011: Methods for chemical analysis of cobalt. Part 7: Determination of zinc content. Flame atomic absorption spectrometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Methods for chemical analysis of cobalt.Part 7. Determination of zinc content.Flame atomic absorption spectrometry ICS 77.120.70 H13 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 281.7-1994 Methods for chemical analysis of cobalt Part 7. Determination of zinc contents Flame Atomic Absorption Spectrometry Part 7. Determinationofzinccontent- Issued on. 2011-12-20 2012-07-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordYS/T 281-2011 "cobalt chemical analysis method" is divided into the following 20 sections. --- Part 1. Determination of iron content sulfonic acid spectrophotometry --- Part 2. Determination of the amount of chrome aluminum Azure S Spectrophotometry --- Part 3. Determination of silicon content - Molybdenum blue spectrophotometric method --- Part 4. Determination of arsenic content - Molybdenum blue spectrophotometric method --- Part 5. Determination of phosphorus content - Molybdenum blue spectrophotometric method --- Part 6. Determination of magnesium content - Flame atomic absorption spectrometry --- Part 7. Determination of zinc content - Flame atomic absorption spectrometry --- Part 8. Determination of cadmium content by flame atomic absorption spectrometry --- Part 9. Determination of lead content - flame atomic absorption spectrometry --- Part 10. Determination of nickel content by flame atomic absorption spectrometry --- Part 11. Flame atomic copper, manganese content absorption spectrometry --- Part 12. arsenic, antimony, bismuth, tin, lead and determining the amount of electrothermal atomic absorption spectrometry --- Part 13. Determination of sulfur content high frequency induction furnace combustion infrared absorption method --- Part 14. Determination of the amount of carbon high-frequency induction furnace combustion infrared absorption method --- Part 15. arsenic, antimony, bismuth contents - Hydride Generation - Atomic Fluorescence Spectrometry --- Part 16. Determination of DC arc atomic arsenic, cadmium, copper, zinc, lead, bismuth, tin, antimony, silicon, manganese, iron, nickel, aluminum, magnesium content of the emitted light Spectroscopy --- Part 17. aluminum, manganese, nickel, copper, zinc, cadmium, tin, antimony, lead, bismuth content - Inductively Coupled Plasma Mass Spectrometry --- Part 18. Determination of sodium content by flame atomic absorption spectrometry --- Part 19. calcium, magnesium, manganese, iron, cadmium, zinc content - Inductively coupled plasma atomic emission spectrometry --- Part 20. Determination of oxygen content - Impulse - infrared absorption method This section YS/T 281 Part 7. This section drafted in accordance with GB/T 1.1-2009 given rules. The partial replacement of YS/T 281.7-1994 "cobalt chemical analysis by flame atomic absorption spectrometry determination of zinc content." versus YS/T 281.7-1994 compared, this section there are major changes as follows. --- Text format has been modified, supplemented with quality assurance and control provisions, increase the repeatability limit and reproducibility limit; --- Complement the test reporting requirements. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) and focal points. This standard is drafted by. Jinchuan Group Co., Ltd., Beijing General Research Institute of Mining and Metallurgy. This section is responsible for drafting unit. Jinchuan Group Limited. Participated in the drafting of this section. Zhejiang Huayou Cobalt Co., Ltd., Beijing Nonferrous Metal Research Institute, Beijing General Research Institute of Mining and Metallurgy. The main drafters of this section. Zhang Lansheng, Lixi Kai, Lvqing Cheng, Zhang Jihong, Wu Yahui, Xie Bohua, Fanjuan Hui, Lee Man Chi, Feng advanced, Jiang Tao demand. This part of the standard replaces the previous editions are. --- YS/T 281.7-1994. Methods for chemical analysis of cobalt Part 7. Determination of zinc contents Flame Atomic Absorption Spectrometry Warning. Use of this standard shall have a person experiences regular laboratory work. This standard does not point out all possible security issues. Make With those who have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.1 ScopeThis section YS/T 281 provides for the determination of cobalt in zinc content. This section applies to the determination of zinc content in cobalt. Measurement range. 0.00080% to 0.0080%.2 Method summarySample decomposition with nitric acid, in dilute nitric acid medium, using air - acetylene flame atomic absorption spectrometer at a wavelength of 213.9nm measured Zinc absorbance. In the standard solution and sample solution should contain the same concentration of cobalt matrix.3 ReagentsUnless otherwise specified, the reagents were analytical reagent solution preparation and analysis are secondary distilled water or equivalent purity test Room with water. 3.1 cobalt (wCo≥99.98%, wZn < 0.0001%). 3.2 nitric acid (ρ = 1.42g/mL), pure class distinctions. 3.3 nitric acid (11). 3.4 nitric acid (119). 3.5 standard zinc stock solution. Weigh 0.5000g zinc metal (wZn > 99.95%), placed in 400mL beaker, add 30mL of nitric acid (3.3), cover sheet pan, heat until completely dissolved, micro-boiling rid of nitrogen oxides, removed, washed with water and dish table Beibi, cooled to room temperature. Moved 1000mL volumetric flask with water to volume, and mix. The solution 1mL containing 500μg zinc. 3.6 Zinc standard solution. Pipette 5.00mL standard zinc stock solution (3.5), placed in 250mL flask with water to volume, and mix. This solution Liquid 1mL containing 10μg zinc.4 InstrumentAtomic absorption spectrometer, with zinc hollow cathode lamp. Under optimum working conditions for those who can reach the following indicators can be used. --- Characteristic concentration. in the measurement sample solution matrix consistent solution, characterized in zinc concentration should be less than 0.005μg/mL. --- Linear curve. The curve is divided into five sections according to concentration, absorbance difference between the absorbance difference between the highest and the lowest segment of the segment Ratio of not less than 0.85. --- Precision. standard solution with the highest concentration of 10 times the absorbance measurements, the standard deviation should not exceed the average absorbance 1.50%; absorbance measured 10 times the minimum concentration of the standard solution (not a "zero" concentration of the standard), the standard deviation should not be ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 281.7-2011_English be delivered?Answer: Upon your order, we will start to translate YS/T 281.7-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 281.7-2011_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 281.7-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 281.7-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 281.7-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
