YS/T 275-2024 English PDFUS$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 275-2024: High purity aluminum ingot Status: Valid YS/T 275: Historical versions
Basic dataStandard ID: YS/T 275-2024 (YS/T275-2024)Description (Translated English): High purity aluminum ingot Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H61 Classification of International Standard: 77.150.10 Word Count Estimation: 7,760 Date of Issue: 2024-10-24 Date of Implementation: 2025-05-01 Older Standard (superseded by this standard): YS/T 275-2018 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and order form contents of high-purity aluminum ingots. This standard applies to high-purity aluminum ingots produced with refined aluminum with an aluminum content of not less than 99.996% as raw material YS/T 275-2008: High purity aluminum---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.High purity aluminum ICS 77.120.10 H61 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 275-2000 High purity aluminum Posted 2008-03-12 2008-09-01 implementation National Development and Reform Commission issued ForewordInstead of the standard YS/T 275-2000 "high purity aluminum." This standard is a revision of YS/T 275-2000 "high purity" of. Compared with YS/T 275-2000, the main changes are as follows. --- Of Si, Ti, Zn impurity content has been revised; --- Of grades that method has been modified; --- On the surface quality it was clearly defined; --- Product sampling were clearly defined; --- The product packaging clearly defined. This standard by the National Standardization Technical Committee of non-ferrous metals and centralized. This standard is drafted by. Aluminum Corporation of China Guizhou Branch, public and Xinjiang Company. The main drafters of this standard. high Shulan, who Ping, Cui Jian, Liu Gang, Shang Guangyu, Liu Jie, Di Xinsheng, He Xinguang, SONG. This standard replaces the standards previously issued as follows. --- GB/T 8179-1987; --- YS/T 275-1994, YS/T 275-2000. High purity aluminum1 ScopeThis standard specifies the high purity requirements, test methods, inspection rules and signs, packaging, transportation, storage, purchase orders (or contract) content. This standard applies to 99.99% of aluminum as raw materials, solidification purification method such as the production of high purity aluminum.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 8170 numerical rounding rules YS/T 244.1 ~ 244.9 Chemical analysis methods of high purity aluminum3 Requirements3.1 Categories High purity aluminum into Al-5N, Al-5N5 two grades. 3.2 Chemical composition High purity chemical composition shall comply with the requirements in Table 1. Table 1 Trademark Chemical composition (mass fraction) /% Al not less than Impurity content (× 10-4), not more than Cu Si Fe Ti Zn Pb Ga Cd Ag In Cu + Si + Fe + Ti + Zn + Ga sum Al-5N 99.999 2.8 2.5 2.5 1.0 0.9 0.5 0.5 0.2 0.2 0.2 - 10 Al-5N5 99.9995 2.8 2.5 2.5 1.0 0.9 0.5 0.5 0.2 0.2 0.2 5 5 Note 1. The aluminum content was 100% and the mass fraction of the table is equal to or greater than 0.10 × 10-4% of the difference between the sum of impurities. Note 2. The analysis determined using numerical rounding comparative method, numerical rounding rules in accordance with relevant provisions of GB/T 8170 will be. Rounding digit pole and listed in the table Limit the number of bits the same. Note 3. impurity elements As, Hg, Cr, or other impurities demand side, if required, by agreement between the. Note 4. For party have special requirements, both parties agree otherwise, but the content is less than 0.10 × 10-4% of impurities, not included in the sum of impurities. 3.3 surface quality 3.3.1 high purity aluminum products for the silver-white, bright surface with clear crystalline stripes. 3.3.2 high purity aluminum surface may not have visible inclusions. 3.3.3 high purity aluminum surface allows chipping process, but the process should not affect the chipping defect users. 3.4 Delivery shapes and sizes High purity aluminum supplier shapes and sizes to comply with Table 2. For parties have special requirements, and both parties agree otherwise in the contract Noted. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 275-2024_English be delivered?Answer: Upon your order, we will start to translate YS/T 275-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 275-2024_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 275-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 275-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 275-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
