YS/T 255-2009 English PDFUS$179.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. YS/T 255-2009: Cobalt YS/T 255: Historical versions
Basic dataStandard ID: YS/T 255-2009 (YS/T255-2009)Description (Translated English): Cobalt Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended) Classification of Chinese Standard: H62 Classification of International Standard: 77.150.70 Word Count Estimation: 5,584 Date of Issue: 2009-12-04 Date of Implementation: 2010-06-01 Older Standard (superseded by this standard): YS/T 255-2000 Quoted Standard: YS/T 281.1; YS/T 281.2; YS/T 281.3; YS/T 281.4; YS/T 281.5; YS/T 281.6; YS/T 281.7; YS/T 281.8; YS/T 281.9; YS/T 281.10; YS/T 281.11; YS/T 281.12; YS/T 281.13; YS/T 281.14; YS/T 281.15; YS/T 281.16; YS/T 281.17; YS/T 281.18; YS/T 281.19; YS/T 281.20 Regulation (derived from): MIIT [2009] No. 66 Issuing agency(ies): Ministry of Industry and Information Technology Summary: This standard specifies: cobalt requirements, inspection rules, test methods, packaging, marking, transportation, storage and quality certificates. This standard applies to electrolysis and electrowinning Preparation cobalt metal, mainly used for remelting (dissolve) the manufacture of alloys, cobalt salts and other purposes. YS/T 255-2009: Cobalt---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Cobalt ICS 77.150.70 H62 People's Republic of China Nonferrous Metals Industry Standard Replacing YS/T 255-2000 Posted 2009-12-04 2010-06-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released ForewordInstead of the standard YS/T 255-2000 "Cobalt." Compared with YS/T 255-2000, the main changes in this standard are as follows. --- Scope of this standard excluding fire refining preparation of cobalt metal. --- The Chapter 2, "Normative references" content to "normative references." --- Product added Co9995 grades. --- Different grades of impurities adjusted, in particular (in%). Co9998 grades of P from the revised 0.001 0.0005; Co9980 grade of C from the revised 0.005 to 0.007, Mn from the revised 0.005 0.008, Fe from the revised 0.006 0.02, Cu revised from 0.003 to 0.008, As amended by the 0.0005 to 0.001, Pb revised to 0.0007 from the 0.0004, Zn from the revised 0.002 0.003, Cd 0.0003 by the revised 0.0008, P 0.001 from the revised 0.002, Al made Revised 0.002 0.003, Sn 0.0003 from the revised 0.001, Sb 0.0003 from the revised 0.001, Bi by the 0.0003 Amended to 0.0004; Co9965 grades in the As from the revised 0.001 0.002, Zn 0.002 from the revised 0.004, P by the Revised 0.001 0.003, Sb 0.0005 from the revised 0.002, Bi amended by the 0.0003 0.0005. --- Surface Quality clauses canceled electrolytic cobalt plates of different grades of cobalt, cobalt and cobalt ingot ingot classification and physical requirements and other relevant Content. --- Surface Quality clauses "should be cleared electrolytic cobalt plate lugs" to "If the board of other non-cobalt cobalt lug copper, etc., should be cleared Lug. " --- "Other requirements" electrolytic cobalt plate to block supply, revised cobalt products in one piece or small supply, the demand side, such as cobalt products Special requirements, by mutual agreement of supply and demand, and specified in the contract. --- For Batch mode it has been adjusted, based on the original increase of the same brand of product batch. --- Added "sample cobalt block" content. --- Added "test project" section. --- Increase the "transport and storage" section. --- To Chapter 3, "orders (or contract)," content is adjusted to Chapter 7. --- In the "sampling and sample preparation" chapter in the number of the original sample batches revised standard 5% to 2% of cobalt plate sampling point to the original standard 36 points ranks uniform checkerboard revised to 18.00. This standard by the National Standardization Technical Committee of non-ferrous metals and centralized. This standard was drafted. Jinchuan Group Limited. The main drafters of this standard. Feng Yujie, Lin Hsiu-ying, Zhao Xiuhua, Lv Haibo. This standard replaces the standards previously issued as follows. --- GB/T 6517-1986; --- YS/T 255-1994, YS/T 255-2000. Cobalt range 1 This standard specifies requirements for cobalt, inspection rules, test methods, packaging, labeling, transportation, storage and quality certificate. This standard applies to electrolysis Preparation and electrowinning cobalt metal, mainly used for remelting (dissolve) the manufacture of alloys, cobalt and other purposes.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. YS/T 281 (all parts) Methods for chemical analysis of cobalt3 Requirements3.1 Categories Cobalt products by chemical composition into Co9998, Co9995, Co9980, Co9965, Co9925, Co9830 six grades. 3.2 Chemical composition 3.2.1 The chemical composition of various grades of cobalt should be consistent with Table 1. Table 1 chemical composition of cobalt Grade Co9998 Co9995 Co9980 Co9965 Co9925 Co9830 Chemistry ingredient/% Co is not less than 99.98 99.95 99.80 99.65 99.25 98.30 ImpuritycontentNot very C 0.004 0.005 0.007 0.009 0.03 0.1 S 0.001 0.001 0.002 0.003 0.004 0.01 Mn 0.001 0.005 0.008 0.01 0.07 0.1 Fe 0.003 0.006 0.02 0.05 0.2 0.5 Ni 0.005 0.01 0.1 0.2 0.3 0.5 Cu 0.001 0.005 0.008 0.02 0.03 0.08 As 0.0003 0.0007 0.001 0.002 0.002 0.005 Pb 0.0003 0.0005 0.0007 0.001 0.002 - Zn 0.001 0.002 0.003 0.004 0.005 - Si 0.001 0.003 0.003 - - - Cd 0.0002 0.0005 0.0008 0.001 0.001 - Mg 0.001 0.002 0.002 - - - P 0.0005 0.001 0.002 0.003 - - Al 0.001 0.002 0.003 - - - Sn 0.0003 0.0005 0.001 0.003 - - Sb 0.0002 0.0006 0.001 0.002 - - Bi 0.0002 0.0003 0.0004 0.0005 - - Total impurities 0.02 0.05 0.20 0.35 0.75 1.70 3.2.2 Co9925 above grade cobalt content from 100% minus the table content of impurity elements calculated, Co9830 grade cobalt content listed ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YS/T 255-2009_English be delivered?Answer: Upon your order, we will start to translate YS/T 255-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of YS/T 255-2009_English with my colleagues?Answer: Yes. The purchased PDF of YS/T 255-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version YS/T 255-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 255-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
