YS/T 1156-2016 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 1156-2016: Copper-indium-gallium selenide target
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 1156-2016	139	Add to Cart	3 days	Copper-indium-gallium selenide target	Valid

Similar standards

GB/T 1531   YS/T 649   GB/T 1527   YS/T 1151   YS/T 1152   YS/T 1150   

Basic data

Standard ID: YS/T 1156-2016 (YS/T1156-2016)
Description (Translated English): Copper-indium-gallium selenide target
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H62
Classification of International Standard: 77.150.60
Word Count Estimation: 6,687
Date of Issue: 2016-07-11
Date of Implementation: 2017-01-01
Regulation (derived from): Notice of the Ministry of Industry and Information Technology (2016 No. 37)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality certificates and contracts (or purchase orders) of copper indium gallium selenide targets.

YS/T 1156-2016: Copper-indium-gallium selenide target

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Copper-indium-gallium selenide target ICS 77.150.60 H62 People's Republic of China non-ferrous metal industry standards CIGS target 2016-07-11 released 2017-01-01 implementation Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Nonferrous Metal Standardization Technical Committee (SAC/TC243). This standard was drafted unit. Liuzhou Centennial Advanced Materials Co., Ltd., Guangxi Zhuang Autonomous Region Metallurgical Product Quality Supervision and Inspection Station, Qingyuan Pilot Materials Co., Ltd., Beijing Nonferrous Metal Research Institute. The main drafters of this standard. Chen Jinzhong, Huang Zhaomin, Wu Xiangwu, Zhu Zanfang, Wei Li, Lin Dong, Lu Hong, Shou Ting, Li Feng, Huang Mengchuan, Hu Yongmei. CIGS target

1 Scope

This standard specifies the CIGS target requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality certificate and set Bill (or contract) content. This standard applies to high-purity copper, indium, gallium, selenium as raw material, by sintering and other processes made of copper indium gallium selenide target, the main products Preparation of copper indium gallium selenide thin film solar cell photoelectric conversion layer materials.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 5163 Sintered metal materials (excluding cemented carbide) - Determination of density, oil content and open porosity of saturable sintered metal materials Inorganic chemical products. Crystal structure analysis X - ray diffraction YS/T 1158 (all parts) CIGS target material chemical analysis method

3 requirements

3.1 product classification CIGS target is divided into chemical composition CIGS-4N, CIGS-5N two brands. 3.2 chemical composition 3.2.1 The main components The main components of copper indium gallium selenide target ratio should be Cu 􀏑 In 􀏑 Ga 􀏑 Se = 19.69 􀏑 24.90 􀏑 6.48 􀏑 48.93 (mass fraction) The allowable deviation is ± 0.50% (mass fraction). 3.2.2 impurity components Impurity components of CIGS target shall comply with the requirements of Table 1. Table 1 copper indium gallium selenide target impurity components Grade Impurity content (mass fraction)/(× 10-4%), not more than Al Fe Ni Cr Mn Pb Zn Cd Co Mo Ba Mg Impurities Sum CIGS-4N 10 20 10 10 10 10 10 10 10 10 10 10 100 CIGS-5N 1 2 1 1 1 1 1 1 1 1 1 1 10 Note. The sum of the impurities in the table is the sum of the measured values of the impurity elements listed in the table. 3.2.3 Demand side of the CIGS target chemical composition of special requirements, agreed by the supply and demand sides. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 1156-2016_English be delivered?

Answer: Upon your order, we will start to translate YS/T 1156-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 1156-2016_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 1156-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.