YS/T 1139-2016 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 1139-2016: TC4 titanium alloy cellular strcture parts by additive manufacturing
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 1139-2016	229	Add to Cart	3 days	TC4 titanium alloy cellular strcture parts by additive manufacturing	Valid

Similar standards

JB/T 10766   GB/T 6883   GB/T 3462   YS/T 1135   YS/T 1137   YS/T 1129   

Basic data

Standard ID: YS/T 1139-2016 (YS/T1139-2016)
Description (Translated English): TC4 titanium alloy cellular strcture parts by additive manufacturing
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H72
Word Count Estimation: 10,128
Date of Issue: 2016-07-11
Date of Implementation: 2017-01-01
Regulation (derived from): Notice of the Ministry of Industry and Information Technology (2016 No. 37)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality certificates and order forms (or contracts) for the manufacture of TC4 titanium alloy honeycomb structural parts.

YS/T 1139-2016: TC4 titanium alloy cellular strcture parts by additive manufacturing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
TC4 titanium alloy cellular strcture parts by additive manufacturing ICS 77.160 H72 People's Republic of China Nonferrous Metals Industry Standard Production of TC4 titanium alloy honeycomb structure parts 2016-07-11 released 2017-01-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the National Committee for Standardization of Nonferrous Metals (SAC/TC243). This standard is responsible for drafting units. Xi'an Sailong metal materials limited liability company, Northwest Nonferrous Metals Research Institute, fly and Kang rapid manufacturing section Technology Co., Ltd., Hunan Top Technology Co., Ltd. The main drafters of this standard. Zhu Jilei, Zhao Pei, Xiang Changshu, Jia Wenpeng, Liu Nan, Jia Liang, Chu Ruikun, Dai Yu. Production of TC4 titanium alloy honeycomb structure parts

1 Scope

This standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation, and inspection of TC4 titanium alloy honeycomb structure parts, Storage, quality certificate and order (or contract) content. This standard applies to the laser selection of melting and electron beam selection of two kinds of powder bed powder manufacturing process manufacturing, with an orderly cycle Dense thin-walled honeycomb structure of the TC4 titanium alloy parts, not applicable by the thin rod composed of three-dimensional network of porous structure TC4 titanium alloy parts.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 3620.1 titanium and titanium grades and chemical composition GB/T 3850 method for the determination of densified sintered metal and hard alloy Metallic materials - Vickers hardness test - Part 1. Test methods GB/T GB/T 4698 (all parts) Methods for chemical analysis of sponge titanium, titanium and titanium alloys

3 request

3.1 Chemical composition The oxygen content of the chemical composition of the product shall meet the requirements of Table 1, and the other ingredients shall comply with the provisions of GB/T 3620.1. Table 1 Oxygen content Alloy grade TC4 TC4ELI Oxygen content (mass fraction) /% ≤0.18 ≤ 0.12 3.2 Dimension and its allowable deviation The dimensions and tolerances of the product shall conform to the technical drawings determined by both parties. Typical product shape and size shown in Figure 1, not pay public Poor, its dimensions and allowable deviation should be consistent with the provisions of Table 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 1139-2016_English be delivered?

Answer: Upon your order, we will start to translate YS/T 1139-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 1139-2016_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 1139-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.