YS/T 1111-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 1111-2024	RFQ	ASK	3 days	(Copper profiles for pole coils)	Valid
YS/T 1111-2016	279	Add to Cart	3 days	Copper profiles for pole coil	Obsolete

Basic data

Standard ID: YS/T 1111-2024 (YS/T1111-2024)
Description (Translated English): (Copper profiles for pole coils)
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H62
Classification of International Standard: 77.150.30
Date of Issue: 2024-10-24
Date of Implementation: 2025-05-01
Older Standard (superseded by this standard): YS/T 1111-2016
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the classification and marking, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents and order form contents of copper profiles for pole coils. This standard applies to copper profiles for pole coils of hydro-turbine generator sets.

YS/T 1111-2016: Copper profiles for pole coil

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Copper coil for magnetic poles) ICS 77.150.30 H62 People's Republic of China non-ferrous metal industry standards Pole coil with copper profiles 2016-07-11 released 2017-01-01 implementation Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed and managed by the National Nonferrous Metal Standardization Technical Committee (SAC/TC243). This standard was drafted unit. Shaoxing City Electric Power Co., Ltd., Foshan City Huahong Copper Co., Ltd., Shaoxing City, the quality and technical supervision and testing Institute, non-ferrous metal technology and Economy Research Institute. The main drafters of this standard. Xu Gaolei, Ren Jing, Pengzi, Chen Jidong, Kong Ruixiang, Jiang Jie, Lin Guoliang, Cheng Lixin, Du Xiyong. Pole coil with copper profiles

1 Scope

This standard specifies the pole coil copper profile requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate And purchase order (or contract) content. This standard applies to water turbine generator pole coil copper profile (hereinafter referred to as profile).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 228.1-2010 Tensile testing of metallic materials - Part 1. Test methods GB/T 231.1 Metallic Brinell hardness test - Part 1. Test methods GB/T 351 metallic materials resistance coefficient measurement method GB/T 2828.1 Sampling procedures for sampling inspection - Part 1. Batch inspection sampling plan retrieved by acceptance quality limit (AQL) GB/T 5121 (all parts) - Methods for chemical analysis of copper and copper alloys GB/T 5231 processing copper and copper alloy grades and chemical composition GB/T 8888 non-ferrous metal processing products packaging, marking, transport, storage and quality certificate GB/T 23606 copper hydrogen embrittlement test methods GB/T 26303.2 copper and copper alloy processing materials Dimensions measurement method Part 2 rods, lines, profiles GB/T 27671 conductive copper profiles YS/T 478 copper and copper alloy conductivity eddy current test method Methods for analysis of YS/T 482 copper and copper alloys - Photoemission emission spectrometry YS/T 668 copper and copper alloy physical and chemical detection sampling method YS/T 815 copper and copper alloys Preparation of mechanical properties and process performance samples

3 requirements

3.1 product classification 3.1.1 Profile grades, conditions, specifications should be consistent with the provisions of Table 1. Profile width, thickness shown in Figure 1. Table 1 grades, status, specifications Grade code status Specifications/mm Thickness H Width B Length TU0 T10130 TU1 T10150 Extrusion Drawing (H50) 5.0 ~ 20.0 50.0 ~ 120.0 100 ~ 6000 T1 T10900 T2 T11050 Note. The two sides negotiated for other grades, status, specifications of the strip, the specific requirements specified in the contract. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 1111-2024_English be delivered?

Answer: Upon your order, we will start to translate YS/T 1111-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 1111-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 1111-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 1111-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 1111-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.