YS/T 1079-2015 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 1079-2015: Vanadium-aluminium-iron master alloy

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 1079-2015	209	Add to Cart	3 days	Vanadium-aluminium-iron master alloy

Similar standards

YS/T 896   GB/T 4325.5   GB/T 3458   YS/T 1597   YS/T 1595   YS/T 1081   

Basic data

Standard ID: YS/T 1079-2015 (YS/T1079-2015)
Description (Translated English): Vanadium-aluminium-iron master alloy
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H63
Classification of International Standard: 77.150.99
Word Count Estimation: 6,619
Date of Issue: 2015-04-30
Date of Implementation: 2015-10-01
Regulation (derived from): Ministry of Industry and Information Technology Announcement (2015 No. 28)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies requirements for aluminum and iron vanadium master alloys, test methods, inspection rules, marking, packaging, transportation, storage and quality certificate and purchase order (or contract) content. This standard applies to the use of metal thermal reduction method of production, intermediate aluminum and iron vanadium titanium alloy as the use of additives.

YS/T 1079-2015: Vanadium-aluminium-iron master alloy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Al-Fe alloy vanadium middle) ICS 77.150.99 H63 People's Republic of China Nonferrous Metals Industry Standard Vanadium master alloys Al-Fe Issued on. 2015-04-30 2015-10-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) and focal points. This standard was drafted. Dalian Rong Gaudet kinds of Materials Co., Ltd., Baoji Titanium Group Ltd., Chengde Vanadium big industry limited liability company, West Ministry of Science and Technology Co., superconducting materials, high-tech Donggang East Metal Materials Co., Ltd., Shangluo Amano high-tech materials limited liability company, Dalian Shang Rong Materials Testing Center Co., Ltd., Dalian Chi Rong Materials Engineering Research Center Co., Ltd. The main drafters of this standard. Qiaomin, SUN Shi shower, Feng Ran, Liu Zhiguang, Fengjun Ning, Li Jianxin, Zhang Zhongshi, single Liping, Tian Shuming. Vanadium master alloys Al-Fe

1 Scope

This standard specifies requirements for aluminum and iron vanadium master alloys, test methods, inspection rules, marking, packaging, transportation, and storage and quality certificate Purchase order (or contract) content. This standard applies to the use of metal thermal reduction method of production, intermediate aluminum and iron vanadium titanium alloy as the use of additives.

2 Requirements

2.1 Categories Vanadium master alloys of aluminum and iron grades V69Al19Fe12. 2.2 Chemical composition Chemical composition of the product shall comply with the requirements in Table 1. Table 1 % Trademark Main content Impurities no greater than V Fe Al Si CON V69Al19Fe12 67.0 ~ 72.0 10.0 ~ 16.0 margin 0.30 0.10 0.30 0.05 NOTE. There are special requirements for chemical composition, the two sides negotiated by supply and demand. 2.3 size 2.3.1 Products granular size of not more than 3mm, allowing a small amount beyond the size range of products, but their number should not exceed the delivery of grant 4.0% by weight, a maximum particle size of not more than 5mm. 2.3.2 If the demand side of the product size have special requirements, both parties determined by supply and demand. 2.4 appearance quality Product surface should be clean, it does not allow the oxide film visual evidence nitride film and other metallic and non-metallic inclusions. Test Method 3 3.1 Analysis of the chemical composition of the product according to the current methodology for the party, and the arbitration analysis by both parties through consultation. 3.2 Product size measured by sieving or by measuring the corresponding precision. 3.3 appearance quality of the product by visual inspection. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 1079-2015_English be delivered?

Answer: Upon your order, we will start to translate YS/T 1079-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 1079-2015_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 1079-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.