YS/T 1078-2015 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YS/T 1078-2015: Vanadium-aluminium-tin-chromium master alloy

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 1078-2015	209	Add to Cart	3 days	Vanadium-aluminium-tin-chromium master alloy

Similar standards

YS/T 896   GB/T 4325.5   GB/T 3458   YS/T 1597   YS/T 1595   YS/T 1081   

Basic data

Standard ID: YS/T 1078-2015 (YS/T1078-2015)
Description (Translated English): Vanadium-aluminium-tin-chromium master alloy
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H63
Classification of International Standard: 77.150.99
Word Count Estimation: 6,699
Date of Issue: 2015-04-30
Date of Implementation: 2015-10-01
Regulation (derived from): Ministry of Industry and Information Technology Announcement (2015 No. 28)
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This Standard specifies requirements for chromium vanadium aluminum master alloy of tin, test methods, inspection rules, marking, packaging, transportation, storage and quality certification and purchase order (or contract) content. This Standard applies to the use of metal thermal reduction method of production, intermediate chromium vanadium aluminum tin alloy as titanium additive used.

YS/T 1078-2015: Vanadium-aluminium-tin-chromium master alloy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vanadium-aluminium-tin-chromium master alloy ICS 77.150.99 H63 People's Republic of China Nonferrous Metals Industry Standard Chrome vanadium aluminum master alloys of tin Issued on. 2015-04-30 2015-10-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) and focal points. This standard was drafted. Dalian Rong Gaudet kinds of Materials Co., Ltd., Baoji Titanium Group Ltd., Chengde Vanadium big industry limited liability company, West Ministry of Science and Technology Co., superconducting materials, high-tech Donggang East Metal Materials Co., Ltd., Shangluo Amano high-tech materials limited liability company, Dalian Shang Rong Materials Testing Center Co., Ltd., Dalian Chi Rong Materials Engineering Research Center Co., Ltd. The main drafters of this standard. Qiaomin, SUN Shi shower, Feng Ran, Liu Zhiguang, Fengjun Ning, Li Jianxin, Zhang Zhongshi, single Liping, Tian Shuming. Chrome vanadium aluminum master alloys of tin

1 Scope

This standard specifies requirements for chromium vanadium aluminum master alloy of tin, test methods, inspection rules, marking, packaging, transportation, storage and quality certificate And orders (or contract) content. This standard applies to the use of metal thermal reduction method of production, intermediate chromium vanadium aluminum tin alloy as titanium additives used.

2 Requirements

2.1 Categories Grade chromium vanadium aluminum master alloy of tin V63Al12Sn12Cr12. 2.2 Chemical composition Chemical composition of the product shall comply with the requirements in Table 1. Table 1 % Trademark Main content Impurities no greater than V Sn Cr Al Fe Si CON V63Al12Sn12Cr12 60.0 ~ 65.0 10.0 ~ 15.0 10.0 ~ 15.0 margin 0.30 0.30 0.10 0.30 0.05 NOTE. There are special requirements for chemical composition, the two sides negotiated by supply and demand. 2.3 size 2.3.1 granular products, a particle size range of not more than 6mm, allowing a small amount beyond the size range of products, but the number should not exceed Delivery batch weight of 4.0%, a maximum particle size of not more than 10mm. 2.3.2 If the demand side of the product size have special requirements, both parties determined by supply and demand. 2.4 appearance quality Product surface should be clean, it does not allow the oxide film visual evidence nitride film and other metallic and non-metallic inclusions. Test Method 3 3.1 Analysis of the chemical composition of the product according to the current methodology for the party, and the arbitration analysis by both parties through consultation. 3.2 Product size measured by sieving or by measuring the corresponding precision. 3.3 appearance quality of the product by visual inspection. ......

Image