YC/T 606-2024 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YC/T 606-2024: Determination of the length, width and curl of cut tobacco - Image method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YC/T 606-2024	279	Add to Cart	3 days	Determination of the length, width and curl of cut tobacco - Image method	Valid

Similar standards

YC/T 405.5   GB 5606.2   GB/T 5606.1   YC/T 607   YC/T 609   YC/T 605   

Basic data

Standard ID: YC/T 606-2024 (YC/T606-2024)
Description (Translated English): Determination of the length, width and curl of cut tobacco - Image method
Sector / Industry: Tobacco Industry Standard (Recommended)
Classification of Chinese Standard: X87
Classification of International Standard: 65.160
Word Count Estimation: 14,13
Date of Issue: 2024-01-29
Date of Implementation: 2024-05-01
Issuing agency(ies): State Tobacco Monopoly Administration

YC/T 606-2024: Determination of the length, width and curl of cut tobacco - Image method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65.160 CCSX87 Tobacco Industry Standard of the People's Republic of China Image method for detecting tobacco length, width and curl Released on 2024-01-29 2024-05-01 Implementation The State Tobacco Monopoly Administration issued

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed by the State Tobacco Monopoly Administration. This document is under the jurisdiction of the Cigarette Sub-Technical Committee of the National Tobacco Standards Technical Committee (SAC/TC144/SC1). This document was drafted by. Zhengzhou Tobacco Research Institute, China Tobacco Standardization Research Center, Shandong China Tobacco Industry Co., Ltd., Henan China China Tobacco Industry Co., Ltd., Anhui China Tobacco Industry Co., Ltd., Sichuan China Tobacco Industry Co., Ltd., Hunan China Tobacco Industry Co., Ltd. Any company. The main drafters of this document are. Zhu Wenkui, Deng Guodong, Wang Bing, Li Bin, Li Jiakang, Liu Hongkun, Zhao Jijun, Chen Zhihao, Ding Meizhou, Lu Hongliang, Duan Kun, Wen Wu, Zhang Chao, Zhang Erqiang, Wang Zongying, Liu Minchang, Li Chunguang, Wu Wenqiang, Qin Guoxin, Ding Li, Wang Shu, Zhang Rongya, Liu Bin, Li Hongtao, Pan Fanda, He Jin, Yang Yuyao, Su Ziqi, Zhou Bo, Zhou Lijunzi, Huang Chuanxi, Yu Jing. Image method for detecting tobacco length, width and curl

1 Scope

This document describes the method for the determination of length, width and curl of tobacco cuts. This document is applicable to the determination of cut tobacco, expanded cut tobacco, expanded cut stems, cut reconstituted tobacco leaves and cut blend tobacco.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 16447 Atmospheric environment for conditioning and testing of tobacco and tobacco products

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Length of cut tobacco The length of the centerline of the tobacco outline in the two-dimensional image. 3.2 Width of cut to bacco The mean width of several locations of the tobacco outline in the two-dimensional image. 3.3 Curl of tobacco cut tobacco Parameters that characterize the degree of bending deformation of tobacco contour in two-dimensional images. 3.4 Parameters used to characterize the length distribution characteristics of tobacco samples. Note. When the total length of tobacco in the sample that is greater than or equal to a certain value accounts for 50% of the total length of the tobacco sample, this length value is taken as the sample length. Product characteristic length. 3.5 Parameters that characterize the uniformity of length distribution of tobacco samples.

4 Principle

An optical camera is used to collect tobacco sample images, and the camera calibration method and digital image processing technology are used to calculate and determine the ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YC/T 606-2024_English be delivered?

Answer: Upon your order, we will start to translate YC/T 606-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YC/T 606-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YC/T 606-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.