TYT3601-2023 English PDFUS$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. TYT3601-2023: Code for Use of Rowing Equipment Status: Valid
Basic dataStandard ID: TY/T 3601-2023 (TY/T3601-2023)Description (Translated English): (Three wheel vehicle half shaft) Sector / Industry: Sports Industry Standard (Recommended) Date of Implementation: 2024-06-01 Older Standard (superseded by this standard): GB/T 23921-2009 TYT3601-2023: Code for Use of Rowing Equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 97.220.40 CCSY56 Sports Industry Standards of the People's Republic of China Instructions for use of rowing equipment Published on 2023-09-01 Implemented on 2023-11-01 Released by the State Sports General Administration Table of contentsPreface III 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Requirements for rowing boat selection 2 5 Rowing product requirements 2 5.1 Rowing components 2 5.2 Rowing boat weight requirements 3 6 Check before use 3 6.1 Appearance and accessories inspection 3 6.2 Rowing boat debugging 3 7 Requirements for using water areas 7 8 Marking, packaging, transportation and storage7 8.1 Flag 7 8.2 Packaging 7 8.3 Transport8 8.4 Storage 8 9 Maintenance 8ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. Certain contents of this document may be covered by patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the Chinese Rowing Association. This document is under the jurisdiction of the State Sports General Administration. This document was drafted by. Chinese Rowing Association, Hangzhou Liangjin Boating Co., Ltd., Hangzhou Kanghua Boating Co., Ltd., Hangzhou Qiandao Lake Pearson Boat Co., Ltd., Hangzhou Feiying Boat Co., Ltd., Hangzhou Fuyang Ark Boat Co., Ltd. The main drafters of this document. Chen Chunxin, Wang Yan, Mao Xiaorong, Shentu Weiying, Shao Junping, Zhu Peiwu, Xiong Ying, Fang Wenyou. Instructions for use of rowing equipment1 ScopeThis document stipulates the selection requirements, product requirements, pre-use inspection, usage water requirements, and Marking, packaging, transportation, storage and maintenance. This document applies to rowing equipment used for competitions, training and other activities in still water areas. For rowing equipment for other types of activities, please refer to use.2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date applies to this document; for undated referenced documents, the latest version (including all amendments) applies. used in this document. GB/T 13412 Technical conditions for rowing boats, kayaks, rowing boats and their accessories3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Rowing The boat is shaped like a weaving shuttle. There are movable seats in the cabin. The oars are placed on the oar bolts of the oar rack. The oar rack stretches out on both sides of the boat. The oarsmen move forward with their backs facing each other. The direction is stroked with the paddle pin as the axis. 3.2 lengthofboat The distance from the leading edge of the bow (including the safety ball) to the trailing edge of the stern. Note. The unit is meters (m). 3.3 breadthofboat The maximum width between the outer chords on both sides of the hull (excluding seaboards). Note. The unit is meters (m). 3.4 depthofboat The maximum vertical distance between the centerline of the bottom of the boat and the sheer line. Note. The unit is meters (m). 3.5 oar lock angle The angle between the working surface of the propeller bolt and the vertical line. Note. This angle includes the longitudinal angle and transverse angle of the propeller bolt. 3.6 oarlockheight When the sliding seat is in the lowest position, the vertical distance between the propeller bolt and the lowest part of the sliding seat. ...... |
