TSG 07-2019 PDF EnglishUS$705.00 · In stock · Download in 9 seconds
TSG 07-2019: [Including Amendments 2021XG, 2024XG2] Regulation for Production and Filling Licensing of Special Equipment Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsTSG 07-2019: [Including Amendments 2021XG, 2024XG2] Regulation for Production and Filling Licensing of Special Equipment---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/TSG07-2019 TSG TECHNICAL SPECIFICATION FOR SAFETY OF SPECIAL EQUIPMENT Regulation for production and filling licensing of special equipment [Including Amendments 2021XG1, 2024XG2] State Administration for Market Regulation May 13, 2019 ForewordTable of ContentsForeword... 2 1 General provisions... 4 2 Licensing conditions... 5 3 Licensing procedures and requirements... 8 4 Supplementary provisions... 17 Annex A Format of Production License of Special Equipment... 20 Annex B Licensing conditions for manufacturing organization of boilers... 24 Annex C Licensing conditions for pressure vessel manufacturing organizations and transportable pressure vessel filling organizations... 38 Annex D Production and filling licensing conditions of cylinder... 74 Annex E Licensing conditions for pressure pipeline manufacturing organization... 99 Annex F Licensing conditions for manufacturing organization of safety accessories... 139 Annex G Licensing conditions for elevator manufacturing organization... 155 Annex H Licensing conditions for manufacturing organization of lifting appliance... 171 Annex J Licensing conditions for manufacturing organization of passenger ropeways... 190 Annex K Licensing conditions for manufacturing organization of large-scale amusement devices... 206 Annex L License conditions for manufacturing organization of special purpose motor vehicles in defined fields... 221 Annex M Basic requirements for quality assurance system of special equipment manufacturing organization... 231 No.1 Amendment 2021XG1... 246 No.2 Amendment 2024XG2... 248 Regulation for production and filling licensing of special equipment1 General provisions1.1 Purpose and basis The Regulation is formulated based on relevant laws and regulations such as Special Equipment Safety Law of the People's Republic of China, Administrative Licensing Law of the People's Republic of China and Regulations on Safety Supervision of Special Equipment, in order to regulate the production (design, manufacturing, installation, reformation and repair) and filling licensing of special equipment. 1.2 Application scope The Regulation is applicable to the design, manufacturing, installation, reformation, repair, and filling licensing of special equipment which are used in the territory of the People's Republic of China. 1.3 Licensing entity The agencies performing the production and filling licensing of special equipment are the State Administration for Market Regulation and the department of provincial people's government in charge of the special equipment safety supervision-administration (the State Administration for Market Regulation, hereinafter referred to as ��SAMR��, and the department of provincial people's government in charge of the special equipment safety supervision-administration, hereinafter referred to as the provincial special equipment safety supervision-administration department, are hereinafter collectively referred to as the issuing authority). 1.4 Licensing catalog The categories, items, sub-items, parameters and levels (hereinafter collectively referred to as licensing scope) and the issuing authority of the production and filling licensing of special equipment are implemented in accordance with the Production Licensing Catalog of Special Equipment issued by the SAMR; the types, categories and varieties of equipment in licensing items and sub-items are implemented in accordance with the Special Equipment Catalog. 1.5 License and the validity period The special equipment licenses include the "Production License of Special Equipment of the People's Republic of China�� and the "Filling License of Transportable Pressure Vessel/Cylinder of the People's Republic of China" (hereinafter referred to as ��licenses��, with formats shown in Annex A), of which, the validity period is 4 years.2 Licensing conditions2.1 General requirements The applicant of production and filling license of special equipment (hereinafter referred to as the applicant) shall have legal qualification and the resources suitable for licensing scope, establish and effectively implement the quality assurance system and safety management system suitable for the licensing scope, and be equipped with the technical capability of ensuring the safety performance of special equipment. 2.1.1 Resources The applicant shall have the following resources suitable for licensing scope and meeting the production needs. 2.1.2 Quality assurance system The applicant shall, in accordance with the requirements of the Regulation, establish a quality assurance system suitable for the licensing scope and implement it effectively; thereof, the quality assurance system of the special equipment manufacturing, installation, reformation and repair organizations shall conform to the requirements of Annex M "Basic requirements for quality assurance system of special equipment manufacturing organization", that of pressure vessel and pressure pipeline design organizations shall conform to the requirements of C1.4 and E1.4, and that of transportable pressure vessel and cylinder filling organizations shall conform to the requirements of C3.7 and D2.7. 2.2 General requirements for resources 2.2.1 Personnel In resource conditions, the technical personnel shall have professional education background in science-technology, obtain technical title [Translator note. designation] of relevant discipline and have relevant working experience. The safety management personnel, testing personnel and operating personnel in resources, where included in the administrative licensing of special equipment, shall obtain the corresponding qualification certificate for special equipment personnel. 2.2.4 Conditions sharing 2.2.4.1 The same organization (1) For the same applicant applying for different licensing items, the corresponding licensing conditions specified in Annexes B~L are allowed to be shared; (2) Where the same licensing sub-item product is jointly completed in multiple manufacturing addresses (Note 2) of the same applicant, the sum of resources of such addresses shall meet the licensing conditions specified in Annexes B~L (any other requirements in Annexes B~L, if available, shall prevail), and a unified quality assurance system shall be established. 2.2.4.2 Companies and subsidiaries (companies and branches)3 Licensing procedures and requirements3.1 Licensing procedures Licensing procedures include application, acceptance, appraisal and review, examination and license issuance. 3.2 Application 3.3 Acceptance 3.3.1 Acceptance The issuing authority shall accept the application within 5 working days upon receiving the application data which are complete and conform to the legal form, and issue an electronic (or written) Special equipment administrative license acceptance decision (hereinafter referred to as "acceptance decision"). The name and contact information of the entrusted appraisal and review organization (Note 3) shall be indicated in the acceptance decision. 3.3.2 Correction The issuing authority shall inform the applicant of all contents to be corrected at the same time within 5 working days upon receiving the application data which are incomplete or fail to conform to the legal form, and issue a Correction notice on administrative license application data of special equipment (hereinafter referred to as "correction notice"). 3.3.3 Rejection In case of any of the following circumstances, the issuing authority shall issue Special equipment administrative license rejection decision (hereinafter referred to as ��rejection decision��) to the applicant within 5 working days upon receiving the application data. 3.4 Appraisal and review 3.4.1 General requirements 3.4.2 Procedures and requirements for on-site appraisal and review 3.4.3 Appraisal and review conclusion and report According to the following requirements, the opinions on appraisal and review conclusion are be divided into "qualified", "qualified after rectification" and "unqualified". 3.5 Examination and license issuance The issuing authority shall examine the appraisal and review report and relevant data submitted by the appraisal and review organization within 20 working days upon receiving such report and data; where license issuance conditions are met, it shall issue corresponding license to the applicant, otherwise, it shall issue a "Special equipment administrative license refusal decision" (hereinafter referred to as "refusal decision") to the applicant. 3.6 Additional item, change and extension of license 3.6.1 Additional item 3.6.1.1 Meaning Additional item of the license refers to any of the following circumstances occurring in the licensed organization within the validity period. 3.6.2 Change of license 3.6.2.1 Meaning Change of the license refers to any of the following circumstances occurring in the licensed organization within the validity period. 3.6.2.2 Change of organization name and address When changing its name or address, the licensed organization shall, within 30 working days after the change, apply for license change to the original issuing authority and submit the following data. 3.6.2.3 Address relocation (1) Upon address relocation, the licensed organization shall, in accordance with the requirements of 3.6.2.2, apply to the original issuing authority for license change, submit relevant data and transact the change formalities; for the relocation of manufacturing address or filling address, the appraisal and review shall be conducted, but it is not necessary to prepare the trial-manufactured prototype (sample). During the appraisal and review, attention shall be paid to the checking of resources, and the coverage of the quality assurance system shall be confirmed; 3.6.2.4 Manufacturing (filling) address cancellation Upon manufacturing (filling) address cancellation, the licensed organization shall, in accordance with the requirements of 3.6.2.2, apply to the original issuing authority for license change, submit relevant data and transact the change formalities. The appraisal and review shall also be carried out if considered as necessary by the issuing authority. 3.6.2.5 Change of licensing level The licensed organization, when changing the level of the licensing sub-item, shall apply to the relevant issuing authority, with relevant licensing procedures and requirements (Note 5) handled in accordance with 3.2~3.5. 3.6.2.6 Licensing scope and validity period of new license After the license is changed, the licensing scope and validity period of the new license shall be implemented in accordance with those of the original license; for the cases specified in 3.6.2.3 (2) and 3.6.2.5, the validity period of the new license shall be counted since the issuing data. The original license shall be withdrawn by the original issuing authority. 3.6.3 License extension 3.6.3.1 General requirements 3.6.3.2 License renewal based on self-declared commitment The licensed organization, free of administrative penalty, liability accident, equipment safety performance problem or quality complaint related to special equipment and having corresponding production performance (Note 6) as specified in Annexes B~L during the licensed period before the license renewal, may apply for license renewal without appraisal and review to the issuing authority by submitting data such as self-declared commitment of continuously meeting the licensing requirements before the expiration of the license validity period. 3.6.3.3 License validity period 3.6.3.4 Delayed renewal Before the expiration of the license validity period, when the license renewal is delayed due to the restructuring or the approved relocation of manufacturing or filling site, the manufacturing or filling organization shall apply for delayed renewal to the issuing authority and fill in the license change application form 6 months in advance. Upon application, the approval documents of relevant government department (or higher authority) on restructuring or relocation shall be submitted as annexes at the same time. Upon approval of delayed renewal, the issuing authority shall issue a renewed license with 3.7 License re-issuance4 Supplementary provisions4.1 License management 4.2 Formats of relevant documents Formats of documents, such as the license application form, acceptance decision, correction notice, rejection decision, refusal decision, license change application form and license re-issuance application form, of the production and filling organizations of special equipment, shall be implemented in accordance with the relevant document formats published on the special equipment administrative licensing website of the SAMR. 4.3 Meaning of numerical expression For the purposes of the Regulation, the fixed numerical value, technical title requirements or non-destructive testing qualification requirements are the minimum requirements; relevant expressions such as ��or more/more than�� and ��not less than�� include the numerical value or requirement stated therein. 4.4 Interpretation authority The Regulation shall be interpreted by the SAMR. 4.5 Implementation date The Regulation shall be implemented as of June 1, 2019. 4.6 Abolishment The following documents and safety technical regulations shall be abolished as of the implementation date of the Regulation. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of TSG 07-2019 be delivered?Answer: The full copy PDF of English version of TSG 07-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of TSG 07-2019_English with my colleagues?Answer: Yes. The purchased PDF of TSG 07-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- TSG 07-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of TSG 07-2019?A step-by-step guide to download PDF of TSG 07-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "TSG 07-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
