SN/T 4124-2015 English PDF
Basic dataStandard ID: SN/T 4124-2015 (SN/T4124-2015)Description (Translated English): Technical requirements for the inspection of import and export electric welding machines. Energy efficiency of electric welding machines Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: J64 Classification of International Standard: 25.160.30 Word Count Estimation: 9,989 Date of Issue: 2015-02-09 Date of Implementation: 2015-09-01 Quoted Standard: GB/T 2900.22; GB/T 8118; GB 15579.1; GB 28736 Regulation (derived from): State-Quality-Inspection-Accreditation [2015] 59 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the energy efficiency of the import and export of welding requirements, test methods and results determined. This standard applies to industrial and professional use designed by the three-phase four-wire or three-phase three-wire 220/380 V nominal voltage of 380/660 V power supply welding machine. This standard applies to energy efficiency inspection of import and export welding. This standard does not apply to AC TIG arc welding, AC and DC TIG arc welder, limited by the mechanical device driven arc welder as well as non-professionals to use for manual metal arc welding power supply load. SN/T 4124-2015: Technical requirements for the inspection of import and export electric welding machines. Energy efficiency of electric welding machines---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Welder welding inspection technology import and export requirements for energy efficiency) People's Republic of China Entry-Exit Inspection and Quarantine Standards Importers Welding Inspection Technology Requirements Energy efficiency welder Issued on. 2015-02-09 2015-09-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume the responsibility to identify these patents. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard by the People's Republic of China Fujian Entry-Exit Inspection and Quarantine, Shenzhen People's Republic of China, the Chinese people Zhejiang People's Republic of Exit Inspection and Quarantine, China Institute of Metrology is responsible for drafting. The main drafters of this standard. Panzeng Rong, NI-sensitive, even Pei Rong, Zhou Xin, Lin Xiaohong, milk Lei Hua, Tang Shao Zhao, leaves Germany to live, Liu Huijun. Importers Welding Inspection Technology Requirements Energy efficiency welder1 ScopeThis standard specifies the energy efficiency of the import and export of welding requirements, test methods and results determined. This standard applies to industrial and professional use designed by the three-phase four-wire 220/380V or three-phase three-wire nominal 380/660V of Voltage power supply of welding machine. This standard applies to energy efficiency inspection of import and export welding. This standard does not apply to AC TIG arc welding, AC and DC TIG arc welding, mechanical equipment driven arc welder and Non-professionals use to limit the load of manual metal arc welding power source.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2900.22 Electrotechnical terminology Welder GB/T 8118 General technical requirements for arc welding machines GB 15579.1 welding equipment - Part 1. Welding power sources (IEC 60974-1.2005, IDT) GB 28736 arc welder energy efficiency and energy efficiency level limit3 Terms and DefinitionsGB/T 8118, GB 15579.1 and GB 28736 and defined by the following terms and definitions apply to this document. 3.1 Welder electricweldingmachine The welding energy is converted into electrical energy and enables the entire plant equipment welding operation, including welding power supplies and accessories. 3.2 Arc welder arcweldingmachine Heat of molten metal by arc welding machine and welding. 3.3 Compliance Verification mode moduleofcomplianceverification According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real Shi supervision of the conformity assessment procedures. NOTE. rewrite SN/T 1429.1-2005, the definition of 3.3. 3.4 Inspection Lot inspectionlot The same specifications for the implementation of inspection and collection of models from the same manufacturer under the same production conditions of production per unit of product, referred to as batch. NOTE. rewrite SN/T 1429.1-2005, the definition of 3.4. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 4124-2015_English be delivered?Answer: Upon your order, we will start to translate SN/T 4124-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 4124-2015_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4124-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
