SN/T 4095.1-2015 English PDFUS$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 4095.1-2015: Management specification of laboratory equipment intermediate check Status: Valid
Basic dataStandard ID: SN/T 4095.1-2015 (SN/T4095.1-2015)Description (Translated English): Management specification of laboratory equipment intermediate check Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: A00 Classification of International Standard: 03.120.20 Word Count Estimation: 9,991 Date of Issue: 2015-02-09 Date of Implementation: 2015-09-01 Quoted Standard: GB/T 27025-2008 Regulation (derived from): State-Quality-Inspection-Accreditation [2015] 59 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the general requirements for verification during laboratory equipment. This standard applies to laboratory equipment during the verification. SN/T 4095.1-2015: Management specification of laboratory equipment intermediate check---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Verification of management practices during laboratory equipment) People's Republic of China Entry-Exit Inspection and Quarantine Standards Verification management practices during laboratory equipment Issued on. 2015-02-09 2015-09-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis section drafted in accordance with GB/T 1.1-2009 given rules. This section proposed and managed by the National Certification and Accreditation Administration Committee. This part mainly drafted by. People's Republic of China Jiangxi Exit Inspection and Quarantine. The main drafters of this section. Guo Ping, Yang Chunhua, Ma Xinxin, Lv Xiaoli, Li Mao Ying, Gui Jiaxiang, Zhu Jianxin, accounting Chunrui, Wan Jian-chun. Verification management practices during laboratory equipment1 ScopeThis section provides general requirements for verification during laboratory equipment. This section applies to laboratory equipment during the verification.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. General requirements GB/T 27025-2008 testing and calibration laboratories3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 During verification intermediatecheck Within two adjacent calibration interval, when required, in accordance with the procedures and time specified, the use of simple and practical and has a very credible The method of testing may result in failure of the measuring equipment, reference standards, benchmarks, transfer standards or working standards and reference materials (reference Substance) of certain parameters, to determine whether to maintain its original state and carry out checks. [GB/T 27025-2008, the definition 5.5.10] 3.2 Calibration calibration In a group operating under the specified conditions, the first step is to determine the relationship between the magnitude of the corresponding indication provided by measurement standards between the second step Is determined by the relationship between the values obtained are shown measurement results with this information, the magnitude of the corresponding values shown here have provided a measure of measurement uncertainty Given degrees. [JJF1001-2011, the definition 4.10] 3.3 Verification verification Activities to identify and confirm the measuring instrument complies with the statutory requirements, including inspection, marking and/or issue a calibration certificate. [JJF1001-2011, the definition 9.17]4 Management RequirementsLaboratory management system documentation should reflect the content of the verification period, you should plan accordingly and work instructions. Verification means during the job Guide books are generally include but are not limited to, the following. a) Overview. schematic description of the technical basis (usually on the basis of test procedures, calibration procedures, equipment specification and other reference documents) and the like. b) verification of the project. You can choose according to the technical basis for zero check, sensitivity, accuracy, resolution, repeatability of measurement, a standard curve line ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 4095.1-2015_English be delivered?Answer: Upon your order, we will start to translate SN/T 4095.1-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 4095.1-2015_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4095.1-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
