SN/T 3875-2014 English PDFUS$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 3875-2014: Food contact materials. Polymem. Determination of azodicarbonamide content. High performance liquid chromatography Status: Valid
Basic dataStandard ID: SN/T 3875-2014 (SN/T3875-2014)Description (Translated English): Food contact materials. Polymem. Determination of azodicarbonamide content. High performance liquid chromatography Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: X08 Classification of International Standard: 67.250 Word Count Estimation: 7,749 Quoted Standard: GB/T 6682 Regulation (derived from): AQSIQ notification issued in 2014 on the first batch of 230 industry-standard entry-exit inspection and quarantine Issuing agency(ies): General Administration of Customs Summary: This Standard specifies the method of high performance liquid chromatography polymer-based food contact materials azodicarboxamide content. This Standard applies to the determination of polymer-based food contact materials azodicarboxamide content. SN/T 3875-2014: Food contact materials. Polymem. Determination of azodicarbonamide content. High performance liquid chromatography---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Food contact materials. Polymem. Determination of azodicarbonamide content. High performance liquid chromatography People's Republic of China Entry-Exit Inspection and Quarantine Standards Food contact materials - Polymer azodicarbonamide Determination by HPLC Issued on. 2014-01-13 2014-08-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordAccordance with the standards GB/T 1.1-2009 given rules to write. Please note that some of the content of this document may involve patents. Distribution of this document Institutions do not assume the responsibility to identify these patents. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau. Drafters of this standard. Trade your celery, Kouhai Juan, Zhonghuai Ning, Zhang Min, Huangchen Yang, Wu Ke, Sun Wenwen. Food contact materials - Polymer azodicarbonamide Determination by HPLC1 ScopeThis standard specifies the method of high performance liquid chromatography polymer-based food contact materials azodicarbonamide content. This standard applies to the determination of polymer-based food contact materials azodicarbonamide content.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Laboratory use specifications and test methods GB/T 6682 Analysis3 Method summarySamples were frozen ground, ultrasonic extraction twice with tetrahydrofuran at room temperature, extract nitrogen blowing at 40 ℃ nearly dry, with a 5% (volume fraction) II Dimethyl sulfoxide (DMSO) solution volume to 1mL, after 0.45μm membrane filtration for HPLC injection analysis, external standard method Quantified.4 Reagents and materialsUnless otherwise indicated, the reagents used were of analytical grade water as a water GB/T 6682 stipulated. 4.1 azodicarbonamide (C2H4N4O2, CAS number. 123-77-3). purity of greater than 99.0% (mass fraction). 4.2 tetrahydrofuran. 4.3 dimethyl sulfoxide. 4.4 Methanol. chromatographically pure. 4.5 5% (volume fraction) aqueous solution of dimethyl sulfoxide. accurate Pipette 5mL dimethyl sulfoxide (4.3) in 100mL flask, add water To volume. 4.6 azodicarbonamide stock standard solution (1.0mg/mL). Weigh accurately azodicarbonamide standard (4.1) 0.1g in 100mL capacity Flask, accurate to 0.0001g, dimethyl sulfoxide (4.3) to the mark. 4.7 Azodicarbonamide standard solution. Pipette an appropriate volume of azodicarbonamide standard stock solution (4.6), with 5% DMSO Aqueous solution (4.5) and diluting the series of standard working solution of the desired concentration. 4.8 aqueous membrane, 0.45μm.5 instruments and equipment5.1 High performance liquid chromatograph. equipped with a UV detector. 5.2 ultrasonic generator. 180W. 5.3 liquid nitrogen tank. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 3875-2014_English be delivered?Answer: Upon your order, we will start to translate SN/T 3875-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 3875-2014_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 3875-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
