SN/T 3789-2014 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 3789-2014: Determination of aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium in stainless steel - Wavelength dispersive X-ray fluorescence spectrometry Status: Valid
Basic dataStandard ID: SN/T 3789-2014 (SN/T3789-2014)Description (Translated English): Determination of aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium in stainless steel - Wavelength dispersive X-ray fluorescence spectrometry Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: H11 Classification of International Standard: 77.080.20 Word Count Estimation: 9,954 Quoted Standard: GB/T 16597; GB/T 20066 Regulation (derived from): AQSIQ notification issued in 2014 on the first batch of 230 industry-standard entry-exit inspection and quarantine Issuing agency(ies): General Administration of Customs Summary: This Standard specifies the determination of stainless steel with a wavelength dispersive X-ray fluorescence spectrometer aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium methods. This Standard applies to stai SN/T 3789-2014: Determination of aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium in stainless steel - Wavelength dispersive X-ray fluorescence spectrometry---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Determination of aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium in stainless steel - Wavelength dispersive X-ray fluorescence spectrometry People's Republic of China Entry-Exit Inspection and Quarantine Standards Stainless steel aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, Titanium measurement wavelength dispersive X-ray fluorescence spectrometry Determinationofaluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titaniuminstainlesssteel- Issued on. 2014-01-13 2014-08-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard was drafted according to GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. Chongqing, People's Republic of China Exit Inspection and Quarantine. The main drafters of this standard. Peng Guangyu, Liu Yi, Wang Jing, Zheng Guocan, Zhu Meiwen, Chen Jiang. Stainless steel aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, Titanium measurement wavelength dispersive X-ray fluorescence spectrometry1 ScopeThis standard specifies the determination by wavelength dispersive X-ray fluorescence spectrometer stainless steel aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium method. This standard applies to stainless steel, aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium measured, the measurement range (by mass) shown in Table 1. Sheet aluminum, cobalt, copper, manganese, molybdenum, nickel, phosphorus, sulfur, silicon, titanium, stainless steel measurement range 1% Component mass fraction range Al 0.004 ~ 0.26 Co 0.003 ~ 0.19 Cu 0.01 ~ 0.52 Mn 0.13 ~ 1.98 Mo 0.05 ~ 1.14 Ni 0.01 ~ 16.41 P 0.005 ~ 0.044 S 0.002 ~ 0.302 Si 0.17 ~ 1.26 Ti 0.01 ~ 1.032 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 16597 metallurgical product analysis X-ray Fluorescence Spectrometry General GB/T 20066 Steel and iron - Sampling and determination of the chemical composition of the sample with a sample preparation method3 Method summaryUnder the selected instrument measurement conditions, the sample is measured X-ray fluorescence intensity measured elements characteristic lines, according to the X-ray fluorescence intensity Quantitative relationship between the content of the analyte, the choice of methods and mathematical regression calibration mode, access to the content of the analyte.4 Reagents and materials4.1 P10 gas. 90% of the mixed gas of argon and 10% methane. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 3789-2014_English be delivered?Answer: Upon your order, we will start to translate SN/T 3789-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 3789-2014_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 3789-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
