SN/T 3732-2013 English PDF

US$139.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 3732-2013: Chemicals-Determination of the state: liquid or solid
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 3732-2013	139	Add to Cart	2 days	Chemicals-Determination of the state: liquid or solid	Valid

Similar standards

HG/T 3696.2   HG/T 3696.1   HG/T 3696.3   SN/T 3122   SN/T 0837.3   SN/T 0837.2   

Basic data

Standard ID: SN/T 3732-2013 (SN/T3732-2013)
Description (Translated English): Chemicals-Determination of the state: liquid or solid
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: G10
Classification of International Standard: 71.040.50
Word Count Estimation: 5,538
Quoted Standard: GB/T 3186; ASYM E300
Regulation (derived from): National quality recognition (2013) 569
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies a method for identification of solid and liquid chemicals in order to select the appropriate method and criteria for classification of dangerous chemicals. This standard applies to identification of hazardous chemicals cat classifi

SN/T 3732-2013: Chemicals-Determination of the state: liquid or solid

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Chemicals-Determination of the state. liquid or solid People's Republic of China Entry-Exit Inspection and Quarantine Standards Solid and liquid chemicals identification method Issued on. 2013-11-06 2014-06-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard ASTMD4359.1990 (2006) of non-equivalent, consistent with its technical content, according to the text format GB/T 1.1-2009 made editorial changes. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China, Changzhou Exit Inspection and Quarantine. The main drafters of this standard. Liu Junfeng, Xu Yan, Zhou Zhilong, China Su Qian, Luo Shipeng. Solid and liquid chemicals identification method

1 Scope

This standard specifies a method for identification of solid and liquid chemicals in order to select the appropriate methods and standards for hazardous chemicals Risk classification. This standard applies to discrimination viscous chemical hazard classification process in solid and liquid form.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling ASTME300 industrial chemical sampling procedures Principle 3 Identification of chemicals to be placed in a sealed container and heated to 38 ℃ after sealing. Remove the container lid and the container upside down, by observing the container Outflows in the sample to determine the chemical form of solid or liquid.

4 instruments and equipment

4.1 paint cans or similar tank container. 1L, cover, diameter 108mm ± 5mm, height 120mm ± 5mm. 4.2 Oven. Accuracy ± 1 ℃, can be constant at 38 ℃. 4.3 tripod or ring-shaped holder. 4.4 surface plate. 4.5 Stopwatch. accuracy 0.1s. 4.6 Ruler. Accuracy ± 1mm.

5 Sampling

According to GB/T 3186 or ASTME300 request, obtain a representative sample drawn from a sample to be tested.

6 samples

6.1 If the sample container in line with the requirements of 4.1, and sample loading capacity equal to greater than 85% can be directly tested. 6.2 If the sample does not meet the description of 6.1, then the sample is loaded into a container comply with the requirements of 4.1, the contents of the container loading greater than or equal An amount of 85%. After loading the sample with a lid sealed to prevent the escape of vapors. Note 1. When the level of the sample is not more than 20mm below the edge of the jar, the jar can be considered filled to 85%. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 3732-2013_English be delivered?

Answer: Upon your order, we will start to translate SN/T 3732-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 3732-2013_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 3732-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.