SN/T 3588-2013 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 3588-2013: Determination of linear density of yarn removed from the knitted fabric Status: Valid
Basic dataStandard ID: SN/T 3588-2013 (SN/T3588-2013)Description (Translated English): Determination of linear density of yarn removed from the knitted fabric Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: W60 Classification of International Standard: 59.080.01 Word Count Estimation: 8,851 Quoted Standard: GB/T 2910.1; GB/T 6529; GB/T 8170; GB/T 8693; GB 9994 Regulation (derived from): National quality recognition (2013), No. 464; industry standard filing Notice No. 1 of 2014 (No. 169 overall) Issuing agency(ies): General Administration of Customs Summary: This standard specifies the determination of knitted yarn removed linear density testing methods. This standard applies to the determination of the majority of knitted yarn linear density is removed, does not apply in certain straight crimped yarn tension SN/T 3588-2013: Determination of linear density of yarn removed from the knitted fabric---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Determination of linear density of yarn removed from the knitted fabric People's Republic of China Entry-Exit Inspection and Quarantine Standards Determination of linear density of yarn knitted fabric Remove Issued on. 2013-08-30 2014-03-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Pan Kwai, Yang Yupei, Liu Yan. Determination of linear density of yarn knitted fabric Remove1 ScopeThis standard specifies the determination knitted yarn removed from the line density test method. This standard applies to most of the knitted yarn removed Determination of linear density, does not apply on certain straight yarn tension can not be eliminated It curled, or can not be split, and fabric weaving, finishing and the method of analysis of yarn damaged. Note. The use of this standard methods of knitted yarn linear density may be the front line of the original yarn weaving different densities.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2910.1 Textiles - Quantitative chemical analysis - Part 1. General principles of testing GB/T 6529 Textiles Standard conditioning and testing atmosphere GB/T 8170 repair value expressed about the rules and limit values and judgment GB/T 8693 Textile yarn label GB 9994 the moisture regain of textile materials3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Linear density lineardensity Mass per unit length of the yarn to the Turks and fractional units or multiples thereof units. 3.2 Standard atmosphere standardatmosphere Relative humidity and temperature controlled environment, textiles in this environment temperature and humidity conditioning and testing. Standard atmosphere should warm Degree of 20.0 ℃, relative humidity was 65.0%. 3.3 Moisture regain conventionalmoistureregain Textile Materials regain conventional value. Principle 4 Remove from the sample yarn, measuring its stretched length and quality, where quality standards in the quality of the humidity in the atmosphere after the test, or Drying quality. Calculated based on the quality and yarn count stretched length. In the determination of the dry mass of the yarn, when heated to 105 ℃, easily volatile substances other than water caused significant losses in this case should be Sample standard air quality was measured after the humidity. You can not go unless yarn fiber material was measured to be on the go unless yarn fiber material was measured. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 3588-2013_English be delivered?Answer: Upon your order, we will start to translate SN/T 3588-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 3588-2013_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 3588-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |