SN/T 3386-2012 English PDFUS$724.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 3386-2012: Food contact materials. Polymers. Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides Status: Valid
Basic dataStandard ID: SN/T 3386-2012 (SN/T3386-2012)Description (Translated English): Food contact materials. Polymers. Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: X08 Classification of International Standard: 67.250 Word Count Estimation: 38,335 Date of Issue: 12/12/2012 Date of Implementation: 7/1/2013 Quoted Standard: SN/T 2824-2011; ISO 8442-2; EN 10088-1 Adopted Standard: BS EN 1186-11-2002, IDT Regulation (derived from): State-Quality-Inspection-accreditation (2012) 777 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the food contact material at the selected time and not more than 20��C higher than 121��C temperature conditions - polymer materials or products overall migration in fatty food simulants 14C-labeled synthetic triglycerides mixture of SN/T 3386-2012: Food contact materials. Polymers. Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Food contact materials.Polymers.Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides People's Republic of China Entry-Exit Inspection and Quarantine Standards Food contact materials - Polymer Migrating to 14C-labeled synthetic triglycerides mixture Test methods for overall migration Issued on. 2012-12-12 2013-07-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is equivalent to using BSEN1186-11.2002 "migrate from the plastic into the C-labeled synthetic triglycerides mixture overall migration Test Method "(in English). The standard of editorial changes, the main differences are as follows. --- Because regardless of the technical content of this standard, delete BSEN1186-11.2002 in the previous page, directory, foreword, introduction, references, Appendix E and the following pages; --- The original 3.2,4.2,5.2,6.2 bar at the beginning of the "note" to Lead to meet our national standards for chemical analysis of series Write requests; --- For the description of the test procedure more organized resistance, the original text of Article 3.5.3,3.5.5,4.5.3,5.5.3,6.5.3,6.5.5 Content subdivided into several one provision; --- The original warnings to note, in accordance with the provisions of the note number of national standards for the preparation of requirements for adjustment; --- Use the "standard" instead EN1186-11.2002 "The European Standard"; --- Instead of numbers with decimal point as the decimal comma ",". ","; --- "Ml" changed to "mL" representation. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Hubei Exit Inspection and Quarantine. The main drafters of this standard. about Tao Ling, Guo Jian, Cui Hairong, Ye Cheng, Yang downwind. Food contact materials - Polymer Migrating to 14C-labeled synthetic triglycerides mixture Test methods for overall migration1 ScopeThis standard specifies the food contact material at the selected time is greater than 20 ℃ and no higher than 121 ℃ temperature conditions --- polymer material Determination of four kinds of material or article in fatty food simulants 14C-labeled synthetic triglycerides mixture overall migration, including full immersion We can not test cell method, a pouch, the product filling method. This standard applies to food contact materials --- or sheets of polymer materials, also apply to Most can be cut to the appropriate size specimen or can Filled container or article. This standard is applicable to all types of food contact materials --- polymer materials.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. SN/T 2824-2011 the export of food contact materials - Polymer overall migration test conditions and methods Selection Guide (SN/T 2824-2011, idtEN1186-1.2002) ISO 8442-2 and food contact materials and articles cutlery and tableware concave Part 2. requirements for stainless steel and silver-plated cutlery EN10088-1 stainless steel - Part 1. List of stainless steel 3 Method A --- total immersion 3.1 Principle Determination of food contact materials intended for food contact --- sample mass loss per unit surface area of polymer materials, food contact material obtained The total amount of material --- Migration polymer material samples. According to the conditions of use determines whether the selected test conditions, see SN/T 2824-2011 in Chapters 6 and 7. At greater than 20 ℃ not higher than 121 deg.] C temperature range, in a sample of known mass of 14C-labeled synthetic triglycerides to soak After the exposure time, from the 14C-labeled synthetic triglycerides removed, attached to the surface of the specimen was removed 14C-labeled synthetic triglycerides, and again Weighing. Sample usually remains absorbed 14C-labeled synthetic triglycerides. Extracting the adsorbed 14C-labeled synthetic triglycerides, and by liquid Scintillation counter quantitatively. For some polymer material samples by Soxhlet extraction it is not completely absorbed 14C-labeled synthetic triglycerides. in This standard after Soxhlet extraction still remains of 14C-labeled synthetic triglycerides may be released by dissolution method or a combustion method. Burn Burn method applicable to all types of polymer materials, while the dissolution method applies only to energy in a suitable solvent (such as. tetrahydrofuran) dissolved high molecular weight polyethylene Compound materials. Note 1. 14C labeling substance use and handling practices should comply with the relevant regulatory requirements. Note 2. This standard applies to food contact materials --- polymer material films or sheets, but also for most of the container can be cut to the appropriate size specimen or ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 3386-2012_English be delivered?Answer: Upon your order, we will start to translate SN/T 3386-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 3386-2012_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 3386-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
