SN/T 2932-2011 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2932-2011: Determination of vapor pressure of the chemicals. Triple expansion method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 2932-2011	259	Add to Cart	3 days	Determination of vapor pressure of the chemicals. Triple expansion method	Valid

Similar standards

GB/T 4472   HG/T 3811   GB/T 3143   SN/T 5678   SN/T 5692   SN/T 5494   

Basic data

Standard ID: SN/T 2932-2011 (SN/T2932-2011)
Description (Translated English): Determination of vapor pressure of the chemicals. Triple expansion method
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: G04
Classification of International Standard: 71.100
Word Count Estimation: 10,191
Date of Issue: 2011-05-31
Date of Implementation: 2011-12-01
Quoted Standard: GB/T 4756; GB/T 9168; JJG 1098
Regulation (derived from): National-Quality-Inspection-accreditation (2011) 291
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the volatile liquid chemical vapor generated in a vacuum pressure method using automatic determination of the vapor pressure tester. This standard applies to the determination of the temperature of 0 ~ 100��C, gas-liquid ratio of 4: 1 to 0. 02: 1, the vapor pressure of not more than 500kPa determination of volatile liquid chemical vapor pressure. This standard does not apply to explosive substances and exposed to air at room temperature automatically ignite the material. This standard does not entirely make recommendations on all issues involved. Therefore, before using this standard, the user must establish appropriate safety and protection measures, and develop appropriate management system.

SN/T 2932-2011: Determination of vapor pressure of the chemicals. Triple expansion method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of vapor pressure of the chemicals.Triple expansion method People's Republic of China Entry-Exit Inspection and Quarantine Standards Chemical vapor pressure measurement method Triple Expansion Method Issued on. 2011-05-31 2011-12-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Guangdong Entry-Exit Inspection and Quarantine Shanghai People's Republic of China Bureau, People's Republic of China Ningbo Exit Inspection and Quarantine. The main drafters of this standard. Lee Jun, Bo Ping, Huang Ziyi, Di Cuiping, Zheng Jianguo, Chen Xiang, Wu bud, Jiang Wei. This standard is the first release of the entry-exit inspection and quarantine industry standards. Chemical vapor pressure measurement method Triple Expansion Method

1 Scope

This standard specifies the volatile liquid chemical vapor produced in the vacuum pressure method of automatic determination of the vapor pressure tester. This standard applies to the determination of the temperature of 0 ℃ ~ 100 ℃, gas-liquid ratio from 4/1 to 0.02.1, vapor pressure of not higher than the volatile 500kPa Liquid chemical vapor pressure measurement. This standard does not apply to explosive substances and exposure to air will auto-ignition material at room temperature. This standard does not involve the safety of all Suggestions wide issues. Therefore, before using this standard, the user must establish appropriate safety and protective measures, and to develop appropriate management system.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 4756 petroleum liquids hand sampling method (ISO 3170. 1988, eqv) GB/T 9168 Petroleum products - Determination of distillation range reduced pressure JJG1098 thermocouple, RTD automatic measurement system calibration specifications

3 PRINCIPLE OF THE METHOD

An inner piston and can be temperature-controlled test tube, the test tube sealed after injecting a known volume of the sample, the sample volume expansion in three steps Expansion to the original x 1 times, a measured value of each total pressure after expansion, the value calculated by the three-step total pressure of dissolved air and the partial pressure of air in the sample Dissolution pressure, the temperature was raised to a certain value and the measured value of the total pressure. Finally, calculated vapor pressure.

4 Terms and Definitions

The following terms and definitions apply to this document. 4.1 Total pressure totalpressure (TPx) When the gas-liquid ratio and the sample was not dissolved x.1 presence of water, and the air pressure of a gas containing chemicals produced in vacuum. 4.2 The partial pressure of dissolved air partialpressurefromdissolvedair (PPA) Dissolved by the pressure exerted by the volatile liquid gas in the liquid air. 4.3 Vapor pressure vaporpressure (VPx) When the gas-liquid ratio is x.1, the total pressure and dissolved air pressure of the points difference.

5 Reagents

Unless otherwise indicated, the reagents used were of analytical grade. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 2932-2011_English be delivered?

Answer: Upon your order, we will start to translate SN/T 2932-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 2932-2011_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 2932-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.