SN/T 1731.3-2006 English PDF

US$179.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1731.3-2006: Safety performance test for pyrotechnic composition used for export fireworks and firecrackers. Part 3: Deflagration temperature
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1731.3-2006	179	Add to Cart	2 days	Safety performance test for pyrotechnic composition used for export fireworks and firecrackers. Part 3: Deflagration temperature	Valid

Similar standards

GB/T 3634.2   GB/T 3634.1   SN/T 1731.2   SN/T 1731.12   SN/T 1731.11   

Basic data

Standard ID: SN/T 1731.3-2006 (SN/T1731.3-2006)
Description (Translated English): Safety performance test for pyrotechnic composition used for export fireworks and firecrackers. Part 3: Deflagration temperature
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: G89
Classification of International Standard: 71.100.30
Word Count Estimation: 5,536
Date of Issue: 2006-01-26
Date of Implementation: 2006-08-16
Regulation (derived from): Industry Standard Notice 2006 No. 4 (total of 76)
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the use of fireworks exports flashpoint pyrotechnic Test methods for verification. This standard applies to exports of fireworks with pyrotechnic flash point determination.

SN/T 1731.3-2006: Safety performance test for pyrotechnic composition used for export fireworks and firecrackers. Part 3: Deflagration temperature

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety performance test for pyrotechnic composition used for export fireworks and firecrackers.Part 3. Deflagration temperature Book of the People's Republic of China Entry and Exit Inspection and Quarantine Export fireworks and firecrackers with pyrotechnics Safety performance test method Part 3. Determination of burst points Released on.2006-01-26 Implementation of.2006-08-16 People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued

Foreword

SN/T 1731 "Test method for safety performance of pyrotechnics for export of fireworks and firecrackers" is divided into. --- Part 1. General; --- Part 2. Determination of thermal stability at 75 ° C; --- Part 3. Determination of the explosion point; --- Part 4. Qualitative analysis of banned restricted drugs; ---Part 5. Determination of impact sensitivity; ---Part 6. Determination of friction sensitivity; ---Part 7. Determination of hygroscopicity; --- Part 8. Determination of ignition temperature; ---Part 9. Determination of flame sensitivity; --- Part 10. Determination of static spark sensitivity. This part is the third part of SN/T 1731. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Jiangxi Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this section. Zeng Shaohua, Ye Xiaohong, Lu Zhong, Liu Jieguang, Zhang Junlian. This section is the first industry standard for entry-exit inspection and quarantine. Safety test method for pyrotechnics for fireworks and firecrackers Part 3. Determination of burst points

1 Scope

This part of SN/T 1731 specifies the test method for the fire-fighting agent explosion point test for exporting fireworks and firecrackers. This section applies to the determination of the explosive point of pyrotechnics used in exporting fireworks and firecrackers.

2 Principle of the method

The time during which the pyrotechnic composition receives heat at a specified medium temperature, and the time from the start of the treatment to the ignition is called the rupture period of the drug burst. This medium temperature is the point of explosion of the agent during this lag period. Within a certain temperature range, the logarithm of the lag period τ(s) is linear with the reciprocal of the corresponding burst point T(K). Its off See the formula (1). Lnτ=A/T+B (1) In the formula. τ---burst lag period, in seconds (s); T---burst temperature, the unit is Kelvin temperature (K); A, B --- a constant related to the drug. This section uses the medium temperature of the 5s lag period as the burst point of the medicament.

3 reagents and materials

3.1 Requirements for each component of the explosion point tester. --- Temperature controller. The temperature control range is from room temperature to 600 °C, and the temperature control accuracy is ±1 °C. --- Thermometer. The accuracy is not less than ±1 °C, and it can be composed of thermocouple and secondary instrument with corresponding precision. ---Timer. The accuracy is not less than 0.01s. The above three items can also automatically control the recorder with the corresponding precision time temperature. ---Heating furnace. The metal bath heated by the electric resistance wire can be made of Wood alloy or an alloy having a melting point of not higher than 150 °C. Temperature measuring hole The center distance from the sample hole is not more than 20mm, and the inner diameter of the bath is mm85mm and the depth is 120mm. 3.2 No. 8 flat bottom aluminum (or copper) detonator shell. 3.3 Brass plug. The surface of the copper plug should be smooth, free of rust, deformation and obvious scratches. 3.4 Balance. The division value is 0.001g. 3.5 Vacuum drying oven or electric constant temperature water oven. 3.6 Detonator shell clamp. 3.7 Teguer. 3.8 Small hydraulic press. 0MPa~2.5MPa, pressure gauge graduation value 0.05MPa. 3.9 Weighing paper.

4 test

4.1 Test preparation 4.1.1 Samples larger than 3 mm shall be pulverized and tested with samples of less than 3 mm. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1731.3-2006_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1731.3-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1731.3-2006_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1731.3-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.