SN/T 1688.4-2013 English PDFUS$369.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 1688.4-2013: Rules for the inspection of power-driven vehicles for import and export. Part 4: Motor vehicle products Status: Valid SN/T 1688.4: Historical versions
Basic dataStandard ID: SN/T 1688.4-2013 (SN/T1688.4-2013)Description (Translated English): Rules for the inspection of power-driven vehicles for import and export. Part 4: Motor vehicle products Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: T40 Classification of International Standard: 43.020 Word Count Estimation: 14,199 Older Standard (superseded by this standard): SN/T 1688.3-2005; SN/T 1688.4-2006 Quoted Standard: GB 1589; GB/T 2828.11; GB 3847; GB 4094; GB 4785-2007; GB 7258-2012; GB 9656; GB 11567.1; GB 11567.2; GB 13365; GB 13392; GB 16735; GB 18285-2005; GB 18320-2008; GB 18322; GB/T 18384.1; GB/T 18384.2; GB/T 18384.3; GB/T 18411; GB 18564.1; GB 18564.2; GB/T Regulation (derived from): National quality recognition (2013) 569 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the technical requirements for the import and export of automotive products, test methods, sampling and eligibility determination. This standard applies to power-driven, with four or more wheels carrying non-rail vehicles. SN/T 1688.4-2013: Rules for the inspection of power-driven vehicles for import and export. Part 4: Motor vehicle products---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection of power-driven vehicles for import and export.Part 4. Motor vehicle products People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 1688.3-2005, SN/T 1688.4-2006 Import and export inspection of motor vehicles Part 4. Automotive Products Part 4. Motorvehicleproducts Issued on. 2013-11-06 2014-06-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordSN/T 1688 "Importers motor vehicle inspection procedures" is divided into six sections. --- Part 1. General requirements; --- Part 2. Motorcycle; --- Part 3. farm vehicles; --- Part 4. automotive products; --- Part 5. electric motorcycles and electric mopeds; --- Part 6. engine. This section SN/T 1688 Part 4. This section drafted in accordance with GB/T 1.1-2009 given rules. This section replaces the SN/T 1688.3-2005 "import and export inspection of motor vehicles - Part 3. farm vehicles" and SN/T 1688.4-2006 "import and export inspection of motor vehicles - Part 4. automotive products." This section compared with the SN/T 1688.3-2005 and SN/T 1688.4-2006, the main technical changes are as follows. --- Modify the scope of Chapter 1 (see Chapter 1), the three-wheeled vehicles (the original "three farm vehicles") and low-speed vehicles (formerly "Four Wheel farm vehicles ") included automotive products; --- Modify the sampling standards to GB/T 2828.11-2008 replaced defunct GB 15482-1995; --- Modified "car flag" content, an increase of modified cars signage provisions (see table paragraph 1 A.1, paragraph 2), and dangerous goods Truck, three cars, low-speed vehicles and hybrid electric vehicles marking requirements (see Table A.1, paragraph 1, paragraph 4 to 7); --- Increased three-wheeled vehicles and low-speed vehicles outside dimensions, axle load, the quality requirements of the steering apparatus, external lighting and signaling devices (see Table A.1, paragraph 2, paragraph 2, item 3, paragraph 8, item 5, paragraph 3); --- Increased reversible cab safety requirements (see paragraph 8 A.1, paragraph 8); --- Increasing the car is equipped with hydraulic lifting devices lifting safety requirements (see paragraph 8 A.1, paragraph 9); --- Increased requirements for trucks and other retro-reflective markings (see Table Item 8 A.1, paragraph 10); --- Modified car exhaust pipe (see Table A.1 Article 9, paragraph 9, 17); --- Increasing the front truck chassis modified special operations vehicles bumper set of requirements (see Table A.1 Article 9, paragraph 10); --- Increased side protection and rear underrun protection of the requirements of truck chassis modified special operations vehicles and trailers (see Table A.1 Article 9 Paragraph 15, 16); --- Increased bus fire extinguisher installation requirements (see Table A.1 Article 9, paragraph 18); --- Increased automotive equipment triangular warning signs (see Table A.1 Article 9, paragraph 19); --- Increasing the hybrid electric vehicle safety agency requirements and regulations (see Table A.1 Article 9, paragraph 20); --- Increased electric vehicle safety requirements (see Table A.1 Article 9, paragraph 21); --- Increased requirements for wheel vehicles and low-speed vehicle safety device (see Table A.1 Article 9, paragraph 22); --- Increased passenger vehicles, heavy truck, tractor-trailer vehicle traveling data recorder installation requirements (see Table A.1, paragraph 9 23); --- Increased three-wheeled vehicles and low-speed vehicles and vehicle exhaust pollutants requirements (see Table Item 11 A.1, paragraph 7, 8); --- Increasing the test duration (see Chapter 6). This section is technically reference to GB 7258-2012 "safe operation of motor vehicles technical conditions", GB 18320-2008 "three cars and Low-speed vehicle safety technical requirements "and other standards-related content, and sampling, inspection and test results judgment provided for. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Exit Inspection and Quarantine of Jilin, Hebei, People's Republic of China Entry-Exit Inspection and Quarantine Bureau. The main drafters of this section. Sun Yan, Wang Wei, Xu Guodong, Gao Yao, Meng Xiangyu. The partial replacement of SN/T 1688.3-2005 and SN/T 1688.4-2006. SN/T 1688.4-2006 previous version release case. --- SN/T 0791-1999; --- SN/T 0792-1999. Import and export inspection of motor vehicles Part 4. Automotive Products1 ScopeSN/T 1688 provisions of this part of the import and export automotive products, technical requirements, test methods, sampling and qualified judgment. This section applies to be driven by power, having four or more wheels of vehicles carrying non-rail, mainly used for. --- Carrying passengers and/or cargo (goods); --- Towing vehicles to transport goods (goods) or special purpose vehicle; --- Special operations. Also includes. Vehicle a) associated with the power line, such as trolley buses; b) the vehicle curb weight of more than 400kg of three-wheeled vehicles without a cab; c) vehicle curb weight of more than 600kg of the three-wheeled vehicle with a cab.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 1589 road vehicles outside dimensions, axle load limits and quality GB/T 2828.11 Sampling procedures for inspection - Part 11. Small claims overall level of quality assessment procedures GB 3847 from compression-ignition engines and compression-ignition engine vehicle exhaust smoke emission limits and measurement methods Flag GB 4094 automotive controls, indicators and telltales GB 4785-2007 Installation instructions car and trailer exterior lighting and light signaling devices GB 7258-2012 the safe operation of motor vehicles technical conditions GB 9656 automotive safety glass GB 11567.1 car and trailer side protection requirements GB 11567.2 car and trailer rear underrun protection requirements GB 13365 motor vehicle exhaust spark arrestor GB 13392 road transport of dangerous goods vehicles logo GB 16735 Road vehicles - Vehicle identification number (VIN) GB 18285-2005 ignition engine exhaust emission limits and measurement methods (two-speed idle conditions and simple method) GB 18320-2008 three-wheeled vehicles and low-speed vehicles - Safety requirements GB 18322 farm vehicles free acceleration smoke emission limits and measurement methods GB/T 18384.1 Electric vehicles - Safety requirements - Part 1. board energy storage GB/T 18384.2 Electric vehicles - Safety requirements - Part 2. Functional safety and fault protection GB/T 18384.3 electric vehicles - Safety requirements - Part 3. electric shock protection GB/T 18411 Road vehicles product label GB 18564.1 liquid road transport of dangerous goods tank vehicle - Part 1. Technical Requirements atmospheric pressure metal tank ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1688.4-2013_English be delivered?Answer: Upon your order, we will start to translate SN/T 1688.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1688.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1688.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 1688.4-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1688.4-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
