SN/T 1621.1-2012 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1621.1-2012	359	Add to Cart	3 days	Rules for the inspection of power generating equipment for export. Part 1: General requirements	Obsolete

Similar standards

GB/T 2820.9   GB/T 2820.7   GB/T 2820.1   

Basic data

Standard ID: SN/T 1621.1-2012 (SN/T1621.1-2012)
Description (Translated English): Rules for the inspection of power generating equipment for export. Part 1: General requirements
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: K52
Word Count Estimation: 9,994
Quoted Standard: GB 755-2008; GB/T 1859; GB/T 2828.1; GB/T 2893.1; GB 3906-2006; GB 4208-2008; GB 7251.1-2005; GB 13801-2009; GB 14097; GB 14098-1993; GB 14711-2006; GB/T 16273.1; GB 16297-1996; GB 20891-2007; SN/T 0716
Regulation (derived from): National Quality Inspection (2012) 643; industry standard filing Notice 2013 No. 1 (No. 157 overall)
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the requirements for the export of power generation equipment testing, inspection and conformity 141 set. This standard applies to HS code export inspection 850211, 850212, 850213, 850231, 850239 power generation equipment. Power g

SN/T 1621.1-2012: Rules for the inspection of power generating equipment for export. Part 1: General requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of power generating equipment for export Part 1. General requirements People's Republic of China Entry-Exit Inspection and Quarantine Standards Export inspection of power equipment Part 1. General requirements Part 1. Generalrequirements Issued on. 2012-10-23 2013-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

SN/T 1621 "export of power generation equipment for the inspection," is divided into two parts. --- Part 1. General requirements; --- Part 2. Reciprocating internal combustion engine driven alternator group. This section SN/T 1621 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Shandong CIQ, People's Republic of China Fujian Entry-Exit Inspection and Quarantine Bureau. The main drafters of this section. Guo Ximing, Du Hongtao, Wenyun Guang.

Introduction

"Export inspection of power generation equipment" export inspection work in accordance with power generation equipment, power generation equipment exports play a guiding and regulating inspection effect. With China's accession to the World Trade Organization Amendments (WTO) and the "Commodity Inspection Law" and export commodity inspection mode has undergone a drastic change Technology, in order to adapt to the situation and change, the state inspection and quarantine departments in charge of the establishment of a system of inspection and quarantine standards. This part belongs to the inspection and quarantine standards on the third floor --- generic categories, for the export of power generation equipment inspection General requirements. Export inspection of power equipment Part 1. General requirements

1 Scope

SN/T 1621 This section provides for the export of power generation equipment inspection requirements, test methods and conformity determination. This section applies to the HS code 850239 and export inspection 850211,850212,850213,850231 power generating equipment. Generate electricity Apparatus comprising. a reciprocating internal combustion engine driven alternator group, wind power generators and other equipment. This section is a general requirement does not restrict or impede technological progress. It does not include all the technical requirements, which are other standards or rules To protect against personal injury needs.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 755-2008 rotating motor fixed and performance GB/T 1859 Reciprocating internal combustion engines emitted airborne noise - Engineering method and measurement method GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan Design principles in workplaces and public areas for safety signs. GB/T 2893.1 Graphical symbols - Safety colors and safety signs - Part 1 GB 3906-2006 3.6kV ~ 40.5kV AC metal-enclosed switchgear and control equipment GB 4208-2008 shell protection (IP code) GB 7251.1-2005 Low-voltage switchgear and control equipment Part 1. Type - tested and partially type-tested assemblies GB 13801-2009 Fuel type spark machine air pollutant emission limits GB 14097 Noise limits for small and medium power diesel engines GB 14098-1993 turbine noise Safety requirements GB 14711-2006 sized rotary motor GB/T 16273.1 Graphical Symbols Common symbols device GB 16297-1996 Integrated Emission Standard of Air Pollutants GB 20891-2007 non-road mobile machinery diesel engine exhaust emission limits and measurement methods (China Ⅰ, Ⅱ stage) SN/T 0716 exports of machinery and equipment for the inspection of commodities transport packaging

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Sampling mode modeofsamplinginspection According to the mandatory requirements of national technical specifications, batch or draw on exports grant implementation sampling, testing and inspection of conformity assessment activities. 3.2 Type Test mode modeoftypetest According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1621.1-2012_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1621.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1621.1-2012_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1621.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.