SN/T 1588.9-2007 English PDF
Basic dataStandard ID: SN/T 1588.9-2007 (SN/T1588.9-2007)Description (Translated English): Rules for the inspection of lighting equipment for import and export. Part 9: Starter for fluorescent lamps Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140 Word Count Estimation: 8,821 Date of Issue: 2007-08-06 Date of Implementation: 2008-03-01 Older Standard (superseded by this standard): SN/T 0618-1996 Quoted Standard: GB/T 2828.1-2003; IEC 60155-1993 Regulation (derived from): Accredidation-Technology-Letter [2015] No. 247 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the import and export requirements for fluorescent lamps starter, sampling, inspection and test results to determine. This standard applies to preheat fluorescent glow starter can be replaced. SN/T 1588.9-2007: Rules for the inspection of lighting equipment for import and export. Part 9: Starter for fluorescent lamps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection of lighting equipment for import and export.Part 9. Starter for fluorescent lamps Book of the People's Republic of China Entry and Exit Inspection and Quarantine Replace SN/T 0618-1996 Import and export luminaire inspection procedures Part 9. Starters for fluorescent lamps Released on.2007-08-06 2008-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1588 "Import and Export Lamp Inspection Regulations" is divided into 9 parts. ---Part 1. Thermal test light source for luminaire heating test; --- Part 2. General requirements; --- Part 3. Special requirements for lamps for swimming pools and similar places; --- Part 4. Festival lighting; --- Part 5. Double-ended fluorescent lamps; --- Part 6. Incandescent lamps for general lighting in homes and similar places; --- Part 7. bayonet lamp holder; ---Part 8. Ballasts for tubular fluorescent lamps; --- Part 9. Starter for fluorescent lamps. This part of SN/T 1588 is the ninth part of the "Import and Export Lamp Inspection Regulations". This part replaces SN/T 0618-1996 "Export Fluorescent Lamp Starter Inspection Procedures". The main changes in this section compared with SN/T 0618-1996 are as follows. --- The standard name and scope of application have been greatly modified; --- Prepare inspection procedures in accordance with the framework specified in SN/T 0002-2004; --- Increased the general requirements of the inspection procedures; --- Increased inspection supervision mode. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Xiamen Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this section. Su Zhijian, Yan Weimin, Li Shengjie, Zhong Hairu. The previous versions of the standards replaced by this section are. ---SN/T 0618-1996.Introduction"Import and export luminaire inspection procedures - Part 9. Starters for fluorescent lamps" is the basis for the inspection of the starter for import and export fluorescent lamps. Import and export fluorescent lamps use the starter inspection to guide and standardize. With the amendment of China’s accession to the World Trade Organization (WTO) and the "Import and Export Commodity Inspection Law of the People's Republic of China", import and export commodity inspection The inspection work pattern has undergone great changes. In order to adapt to the situation and changes, the national inspection and quarantine authorities have established inspection and quarantine standards. system. This part belongs to the fourth layer of the inspection and quarantine standard system---personality standard, which is designed for the characteristics of the starter for fluorescent lamps. Special requirements for inspection of light lamps with starters. Import and export luminaire inspection procedures Part 9. Starters for fluorescent lamps1 ScopeThis part of SN/T 1588 specifies the requirements, sampling, inspection and test results of the starter for fluorescent lamps for import and export. This section applies to replaceable glow starters for preheated fluorescent lamps.2 Normative referencesThe provisions in the following documents become the provisions of this part by reference to this part of SN/T 1588. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section. GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL) Plan (ISO 2859-1.1999, IDT) IEC 60155.1993 Starter for fluorescent lamps3 Terms and definitionsThe following terms and definitions apply to this section. 3.1 According to the mandatory requirements of the national technical specifications, the type test shall be carried out according to the prescribed period, and the products shall be subjected to batch inspection according to the on-site inspection regulations. Inspection and implementation of the conformity assessment activities of the company's quality management system. 3.2 According to the mandatory requirements of the national technical specifications, the import and export commodities shall be subject to the conformity assessment activities of sampling, inspection and inspection batch by batch or batch. 3.3 The same specifications, models, and unit products produced under the same production conditions for the purpose of inspection are referred to as batches.4 General requirements4.1 General requirements Fluorescent starters are constructed and designed so that they are not hazardous to the user and the surrounding environment under normal conditions of use. 4.2 Safety requirements The general safety requirements for starters for fluorescent lamps shall be in accordance with IEC 60155.1993 and shall be considered for use in the country (region) where applicable. difference. 4.3 Other requirements When applicable, consideration should also be given to the environmental protection, energy efficiency, performance, etc. of the fluorescent lamp starter in accordance with the relevant national (regional) technical regulations. Provisions. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1588.9-2007_English be delivered?Answer: Upon your order, we will start to translate SN/T 1588.9-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1588.9-2007_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1588.9-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
