SN/T 1349-2022 English PDFSN/T 1349: Historical versions
Basic dataStandard ID: SN/T 1349-2022 (SN/T1349-2022)Description (Translated English): (Quarantine and identification method of pine beetle) Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: B16 Classification of International Standard: 65.020.20 Date of Issue: 2022-07-07 Date of Implementation: 2023-02-01 Older Standard (superseded by this standard): SN/T 1349-2004 Issuing agency(ies): General Administration of Customs SN/T 1349-2004: Methods for quarantine and identification of mountain pine beetle (Dendroctonus ponderosea Hopkins)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Methods for quarantine and identification of mountain pine beetle (Dendroctonus ponderosea Hopkins) People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Quarantine identification method for mountain pine Released on June.2004 Implementation of.2004-12-01 People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordAppendix A of this standard is an informative annex. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. Jiangsu Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this standard. Sun Liang, Zhang Yu, Yan Shaozhi, Yang Zhanchen, Yan Junxiang. This standard is the first industry standard for entry-exit inspection and quarantine. Quarantine identification method for mountain pine1 ScopeThis standard specifies the quarantine and identification methods for the size of the mountain pine. This standard applies to the quarantine and identification of mountain pine mites.2 Principle2.2 The adult larvae of the genus Pinus sylvestris are transferred to other tree plants after emergence, and they are mated in the bark to complete a new life generation. 2.3 Distribution, host and adult morphological characteristics, transmission pathways and biological characteristics of Pinus sylvestris var. in accordance with.3 instruments and reagents3.1 Instruments and appliances Stereo microscope, scissors, forceps, micro scalpel, anatomical needle, petri dish, slide, coverslip, alcohol lamp, beaker, insect needle, three-level Table, specimen bottles, labels, etc. 3.2 Reagents Soaking solution (glacial acetic acid. formalin. 95% ethanol. distilled water = 4.6.15.30), 75% ethanol solution. 4 on-site quarantine 4.1 The size of the mountain pine is mainly caused by the xylem and phloem of the wood. During the on-site inspection, the aphid wormhole and aphid excrement are mainly checked. In order to harm the tunnels, adult feathering holes, etc., the symptoms of the found aphids and aphids are sampled, and the found pests are collected. 4.2 Perform a necropsy on the wood where the symptoms of aphids are found and carefully remove the mites.5 Laboratory identification5.1 Preparation 5.1.1 Bring the larvae and eggs to be reared together with the wood and bark samples of the relevant parts back to the laboratory at a temperature of 25 ° C to 30 ° C and humidity. It was observed in 70% of the breeding environment and was identified after growing into adults. 5.1.2 When the insects, larvae, etc. to be observed and identified are cleaned and arranged, and there are dirt or dust on the surface, use 75% ethanol or match Soak the placed soaking solution and soak it. 5.2 Identification 5.2.1 Main characteristics of adult genus --- The back view of the head; visible dark brown to black, with a strong luster. --- Compound eye long ellipse. --- Ten corners of the tentacles, the hammer-shaped flat cake, divided into four sections, the top is flush. --- The front chest plate is flat, no squamous tumor area, with engraved points and hairs, and the middle of the front edge is angularly inscribed. --- The two coleoptera base edges are each protruding, synthesizing a parallel double arc, the base edge is raised, and there is a column of serrations. ---The outer edge of the 胫 section has a dentition. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1349-2022_English be delivered?Answer: Upon your order, we will start to translate SN/T 1349-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1349-2022_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1349-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 1349-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1349-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
