SN/T 1309.3-2010 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1309.3-2010	719	Add to Cart	5 days	The footwear inspection procedures - Part 3: Plastic shoes	Obsolete
SN/T 1309.3-2003	RFQ	ASK	3 days	Rules for inspection of footwear-Rules for inspection of plastics footwear	Obsolete

Similar standards

GB/T 21295   GB/T 21294   GB/T 21980   SN/T 5435   SN/T 5229   SN/T 4955   

Basic data

Standard ID: SN/T 1309.3-2010 (SN/T1309.3-2010)
Description (Translated English): The footwear inspection procedures - Part 3: Plastic shoes
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: Y75
Word Count Estimation: 18,192
Date of Issue: 2010-11-01
Date of Implementation: 2011-05-01
Older Standard (superseded by this standard): SN/T 1309.3-2003
Quoted Standard: GB 6675; GB/T 2703; GB/T 3807; GB/T 3903.1; GB/T 3903.2; GB/T 3903.5; GB/T 11413-2005; GB/T 1040.1; QB/T 2882; QB/T 1813; HG/T 3085-1999; HG/T 3780-2005; SN/T 1309.1
Regulation (derived from): National Quality Inspection (2010) 582
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the plastic shoes of sampling, testing, result judgment and unqualified disposal. This standard applies to the plastic material is the main material of footwear uppers test. This section does not apply to leather, synthetic leather uppers gun for the experience.

SN/T 1309.3-2010: The footwear inspection procedures - Part 3: Plastic shoes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
The footwear inspection procedures - Part 3. Plastic shoes People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 1309.3-2003 Footwear test procedures - Part 3. plastic shoes Rulesforfootwearinspection-Part 3. Plasticsfootwear Issued on. 2010-11-01 2011-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This section 4.4 and 4.5.2,4.5.3 are mandatory, others are recommended. SN/T 1309 "Shoes for the inspection" is divided into seven parts. --- Part 1. Sampling; --- Part 2. Boots; --- Part 3. plastic shoes; --- Part 4. shoes; --- Part 5. sports shoes; --- Part 6. indoor shoes; --- Part 7. shoes. This section SN/T 1309 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. The partial replacement of SN/T 1309.3-2003 "Shoes for the inspection of plastic shoes for the inspection." This section compared with the SN/T 1309.3-2003, the main technical changes are as follows. --- Standard name from "Shoes for the inspection of plastic shoes for the inspection" to "Shoes for the inspection of plastic shoes"; --- On the "Normative references" Content has been updated to adjust; --- Remove the original protocol defined 3.1,3.2,3.3,3.4,3.5,3.6, adding the definition of "color with code" of; --- On the "test content" and "Test form" has been modified. Test content is divided into harmful chemicals limited, physical performance, visual quality And other projects. Into the form of periodic inspection and test lot testing; --- Mandatory provisions to increase the "durability" of the project and related requirements; --- Of a "test project and toxic and hazardous substances detection methods," the original table have been adjusted to supplement them as Appendix A; --- The original table 2 "mechanical safety performance test items, test methods and requirements" has been modified to increase the "slip resistance outsole" Project, delete the "sandals Bangdai pull-out strength," "Baby Shoe Accessories Torque", "heel hardness" project, the original labor and safety shoes Another protective footwear inspection requirements included in the physical properties of the project, as in Table 1; --- Table 3, the original "test the contents of conventional physical performance test, testing methods and requirements" in the part of the project indicators were modified, deleted The "apparent density microporous material", "microporous material compressive deformation," "uppers flex resistance," "lining color fastness" and other test items Currently, the "testing requirements" from the original into "cold sticky plastic shoes," "molded plastic shoes," "injection shoes," "assembling sandals" Four Kinds of change points As "dense", "microporous" two, as in Table 2; --- Table 4, the original "test the quality of the content of the appearance of the project, substandard conditions and substandard classification" part of the test content, unqualified love Conditions and substandard classification were adjusted, supplement, and as Table 3; --- Added Appendix A "related to plastic shoes in major importing countries or regions harmful chemicals limited regulations and requirements", Appendix B "Shoes The main importing countries or regions, the International Organization for Standardization (ISO ) concerning safety shoes, safety shoes and professional shoes standards ", Appendix C" small Accessories tensile testing methods, "Appendix D" shoes folding test methods. " This part by the National Certification and Accreditation Administration of People's Republic of China and focal points. This section was drafted by. People's Republic of China Fujian Exit Inspection and Quarantine, Guangdong Entry-Exit Inspection and Quarantine of People's Republic of China Bureau, People's Republic of China Zhejiang Exit Inspection and Quarantine. The main drafters of this section. Huangwen Rong, Chenxue Can, Tang Zhenhua, dry Min Bao, Lin Liang, Li Lan, Jin Jianfeng. This part of the standard replaces the previous editions are. --- SN/T 1309.3-2003. Footwear test procedures - Part 3. plastic shoes

1 Scope

SN/T 1309 provisions of this part of the plastic shoes of sampling, testing, and results judged unqualified disposal. This section applies to plastic materials as the main material of the upper footwear testing. This section does not apply to leather, synthetic leather uppers for the test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 6675 National Safety Technical Code for Toys GB/T 2703 Footwear term 1040.1 Plastics Determination of tensile properties GB/T Part 1. General GB/T 3807 microporous PVC plastic slippers GB/T 3903.1 Footwear common folding test method Test Method GB/T 3903.2 Footwear general wear test method Test Method GB/T 3903.5 Footwear general visual inspection method of testing methods GB/T 11413-2005 Test method for binding heel shoes QB/T 2882 uppers linings and pads rubbing color fastness test methods QB/T 1813 Test Method for Longitudinal Rigidity shoes hook heart HG/T 3085-1999 Rubber cold sticky shoes HG/T 3780-2005 Footwear static anti-slip performance test method SN/T 1309.1 Footwear test procedures - Part 1. Sampling

3 Terms and Definitions

GB/T 2703, SN/T 1309.1 and define the following terms and definitions apply to this document. 3.1 With color code assignment Package in footwear shoe size, color and style configurations.

4 test

4.1 Examination Content Test content is divided into harmful chemicals limited, physical performance, visual quality and other projects. May limit harmful chemical substances and physical properties of some or all of the applicable tests in test items, the appearance quality inspection ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1309.3-2010_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1309.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1309.3-2010_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1309.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 1309.3-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1309.3-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.