SN/T 1309-2015 English PDFSN/T 1309: Historical versions
Basic dataStandard ID: SN/T 1309-2015 (SN/T1309-2015)Description (Translated English): Technical specification for export footwear Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Y75 Word Count Estimation: 32,387 Date of Issue: 2015-02-09 Date of Implementation: 2015-09-01 Older Standard (superseded by this standard): SN/T 1309.1-2010; SN/T 1309.2-2010; SN/T 1309.3-2010; SN/T 1309.4-2010; SN/T 1309.5-2011; SN/T 1309.6-2010; SN/T 1309.7-2011 Regulation (derived from): State-Quality-Inspection-Accreditation [2015] 59 Issuing agency(ies): General Administration of Customs SN/T 1309.1-2010: The footwear inspection procedures - Part 1: Sampling---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.The footwear inspection procedures - Part 1. Sampling People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 1309.1-2003 Footwear test procedures - Part 1. Sampling Rulesforfootwearinspection-Part 1. Sampling Issued on. 2010-11-01 2011-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordSN/T 1309 "Shoes for the inspection" is divided into seven sections. --- Part 1. Sampling; --- Part 2. Boots; --- Part 3. plastic shoes; --- Part 4. shoes; --- Part 5. sports shoes; --- Part 6. indoor shoes; --- Part 7. shoes. This section SN/T 1309 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. The partial replacement of SN/T 1309.1-2003 "Shoes for the inspection sampling procedures." This section compared with the SN/T 1309.1-2003 main technical changes are as follows. --- Name from "Shoes for the inspection sampling procedures" to "Shoes for the inspection sampling"; --- The "acceptable quality level" to "acceptance quality limit"; --- Cancel "4.2.3 Class A defective acceptable quality level AQL = 0.065", will fail to Class A "fatal failure" only Taken from a batch of samples found to contain one or more of this type of failure is not receiving the batch; --- Normal rules of the transfer rules were relaxed to adjust; --- The sampling plan physical and mechanical properties of the sampling plan and the safety of toxic chemicals merger; --- Increasing the transition rule in FIG; --- Remove the appearance of isolated batch sampling program; This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Shanghai Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Guangdong Entry Inspection and Quarantine Bureau. The main drafters of this section. lode fee Yue, Zhou Zhishun, Rong Qi, Li Lan. This part of the standard replaces the previous editions are. --- SN/T 1309.1-2003. Footwear test procedures - Part 1. Sampling1 ScopeSN/T 1309 This section provides the sample side of footwear products harmful chemicals, physical properties and appearance quality inspection project Technical characteristics of the value of the case, sampling methods, testing levels, limit the reception quality, substandard classification. This section applies to health and safety performance of hazardous chemicals, physical properties and appearance quality inspection and other items of footwear and sampling Determination of test results.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan 3 Terms, definitions and symbols 3.1 Terms and Definitions The following terms and definitions apply to this document. 3.1.1 Inspection lot lot For the implementation of the set of sampling units pooled footwear, called the inspection lot, referred to as batch. 3.1.2 Continuous batch continuingseriesoflot Footwear products to be tested batches available was recently seized by the quality of the information provided footwear batches continuous inspection lot submitted in successive batches. 3.1.3 Isolated batch isolatedlot Produced or from pooled batches of footwear series, the current inspection lot belonging to the batch series. 3.1.4 Sample sample All units of footwear, called samples. 3.1.5 Sample size samplesize Footwear number of units included in the sample, referred to as sample size. 3.1.6 Substandard nonconformity Does not meet the specifications called unqualified. According to the severity of the unacceptable failure is divided into A, B, C categories. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1309-2015_English be delivered?Answer: Upon your order, we will start to translate SN/T 1309-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1309-2015_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1309-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 1309-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1309-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
