SN/T 0987.4-2013 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 0987.4-2013: Rules for performance inspection of IBCs for export dangerous goods. Part 4: Rigid plastics IBCs Status: Valid SN/T 0987.4: Historical versions
Basic dataStandard ID: SN/T 0987.4-2013 (SN/T0987.4-2013)Description (Translated English): Rules for performance inspection of IBCs for export dangerous goods. Part 4: Rigid plastics IBCs Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: A82 Classification of International Standard: 55.020 Word Count Estimation: 9,980 Older Standard (superseded by this standard): SN/T 0987.4-2001 Quoted Standard: SN/T 0370.1; SN/T 0987.1; Recommendations on the Transport of Dangerous Goods Regulation (derived from): National quality recognition (2013) 569 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the definition of dangerous goods rigid plastic intermediate bulk containers, classification, requirements, sampling, testing and disposal of failed batches. This standard applies to performance testing of dangerous goods rigid pla SN/T 0987.4-2013: Rules for performance inspection of IBCs for export dangerous goods. Part 4: Rigid plastics IBCs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for performance inspection of IBCs for export dangerous goods.Part 4. Rigid plastics IBCs People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 0987.4-2001 Inspection of intermediate bulk containers export of dangerous goods Part 4. Rigid plastic intermediate bulk containers Part 4. RigidplasticsIBCs Issued on. 2013-11-06 2014-06-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordSN/T 0987 "export of dangerous goods inspection of intermediate bulk containers" is divided into eight sections. --- Part 1. General; --- Part 2. Using identification; --- Part 3. Composite intermediate bulk container; --- Part 4. Rigid plastic intermediate bulk containers; --- Part 5. wooden intermediate bulk containers; --- Part 6. a flexible intermediate bulk container; --- Part 7. Fibreboard IBC; --- Part 8. Metal intermediate bulk containers. This section SN/T Section 40987 of. This section drafted in accordance with GB/T 1.1-2009 given rules. The partial replacement of SN/T 0987.4-2001 "export of dangerous goods intermediate bulk goods containers performance test procedures --- rigid plastic Feed IBC " This section compared with the SN/T 0987.4-2001, the main technical changes are as follows. --- Updated references, the IMDG Code and relevant as a reference document, the increase in the reference standard; --- The definition of the inspection lot has been modified; --- The classification rigid plastic IBCs removed from the original part of the definition, classification increase in Chapter 4; --- Increased vibration test and test sequence detection methods and test content requirements and eligibility determination. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Tianjin Entry-Exit-Entry Inspection and Jiangxi People's Republic of China Quarantine Bureau. The main drafters of this section. Lining Tao, Jiang Xuefeng, Gao Jian, Ding Lan, Tian shade, Zhang Yong. This part of the standard replaces the previous editions are. --- SN/T 0987.4-2001. Inspection of intermediate bulk containers export of dangerous goods Part 4. Rigid plastic intermediate bulk containers1 ScopeSN/T 0987 provisions of this part of the definition of dangerous goods exported by rigid plastics intermediate bulk containers, classification, requirements, sampling, testing And disposal of substandard batches. This section applies to dangerous goods export performance testing rigid plastics intermediate bulk containers.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. SN/T 0370.1 export of dangerous goods packaging inspection procedures - Part 1. General SN/T 0987.1 export of dangerous goods inspection of intermediate bulk containers - Part 1. General About Recommendations on the Transport of Dangerous Goods Model Regulations (UN, 17th Revision)3 Terms and DefinitionsSN/T 0370.1 and SN/T 0987.1 and define the following terms and definitions apply to this document. 3.1 Inspection Lot inspectionlot In the same materials, the same process, the same structure and the production brings together a number of intermediate bulk containers of dangerous goods. 3.2 Rigid plastics IBCs rigidplasticsIBCs Consists of a rigid plastic cabinet composed of cabinet may have intermediate bulk containers structure of the device and the appropriate auxiliary equipment. Category 4 In accordance with "On Recommendations on the Transport of Dangerous Goods Model Regulations" rigid plastics IBCs have the following types. a) 11H1. bear thereon having a stacked design when the full load configuration device for shipment by gravity removably Rigid plastic solid matter IBC. b) 11H2. Detached for shipment gravity rigid plastic material removably solid intermediate bulk container. c) 21H1. bear their load all of the above structures and equipment for stacking design having, for using pressure removably solid Rigid plastics intermediate bulk container body substances. d) 21H2. Detached for shipping rigid plastic pressure removably solid matter intermediate bulk containers. e) 31H1. bear designed for stacking thereon having the full load of the structure of the device for rigid plastic shipping liquids Bulk containers. f) 31H2. Detached for shipment of liquid rigid plastic IBCs. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 0987.4-2013_English be delivered?Answer: Upon your order, we will start to translate SN/T 0987.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 0987.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 0987.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 0987.4-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0987.4-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
