SN/T 0987.1-2013 English PDF

US$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 0987.1-2013: Rules for the inspection of IBCs for export dangerous goods. Part 1: General specifications
Status: Valid

SN/T 0987.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 0987.1-2013	319	Add to Cart	3 days	Rules for the inspection of IBCs for export dangerous goods. Part 1: General specifications	Valid
SN/T 0987.1-2001	399	Add to Cart	3 days	Export of dangerous goods intermediate bulk goods containers for the inspection of General provisions	Obsolete

Similar standards

GB/T 325.6   GB/T 325.1   SN/T 4148   SN/T 0987.2   SN/T 0987.4   SN/T 0987.3   

Basic data

Standard ID: SN/T 0987.1-2013 (SN/T0987.1-2013)
Description (Translated English): Rules for the inspection of IBCs for export dangerous goods. Part 1: General specifications
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: A82
Classification of International Standard: 55.020
Word Count Estimation: 12,10
Older Standard (superseded by this standard): SN/T 0987.1-2001
Quoted Standard: GB/T 19433
Regulation (derived from): National quality recognition (2013) 569
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the type freezer for high efficiency three-phase permanent magnet synchronous motor, the basic parameters and dimensions, technical requirements, inspection rules, marking, packaging and warranty requirements. This standard applies

SN/T 0987.1-2013: Rules for the inspection of IBCs for export dangerous goods. Part 1: General specifications

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of IBCs for export dangerous goods.Part 1. General specifications People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 0987.1-2001 Inspection of intermediate bulk containers export of dangerous goods Part 1. General Part 1. Generalspecifications Issued on. 2013-11-06 2014-06-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

SN/T 0987 "export of dangerous goods inspection of intermediate bulk containers" is divided into eight sections. --- Part 1. General; --- Part 2. Using identification; --- PART 3; composite intermediate bulk containers; --- Part 4. Rigid plastic intermediate bulk containers; --- Part 5. wooden intermediate bulk containers; --- Part 6. a flexible intermediate bulk container; --- Part 7. Fibreboard IBC; --- Part 8. Metal intermediate bulk containers. This section SN/T Section 10987 of. This section drafted in accordance with GB/T 1.1-2009 given rules. The partial replacement of SN/T 0987.1-2001 "export of dangerous goods cargo inspection of intermediate bulk containers --- General" This section compared with the SN/T 0987.1-2001, the main technical changes are as follows. --- Updated references, the IMDG Code and relevant as a reference document, the increase in the reference standard; --- Modify the definition of intermediate bulk containers; --- Information about the technical requirements of section 6.3.2 of the additional mark. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China Tianjin Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Shanghai Entry-Exit Inspection and Quarantine Bureau. The main drafters of this section. Lining Tao, Feng Zhiji force, Luo Xuan, Tao Haihua, Zhao Qing, Jiang Xuefeng. This part of the standard replaces the previous editions are. --- SN/T 0987.1-2001. Inspection of intermediate bulk containers export of dangerous goods Part 1. General

1 Scope

SN/T 0987 provisions of this part of the definition of dangerous goods for export intermediate bulk containers, requirements, type, material, and the code mark Labeling methods. This section applies to exports of dangerous goods inspection and intermediate bulk containers.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 19433 inspection of packaging of dangerous goods by air safety norms About Recommendations on the Transport of Dangerous Goods Model Regulations (UN, 17th Revision)

3 Terms and Definitions

"On Recommendations on the Transport of Dangerous Goods Model Regulations" is defined in the following terms and definitions apply to this document. 3.1 IBC intermediatebulkcontainers; (IBCs) Also known as IBC or medium-sized bulk containers, it refers to GB 19433 within a predetermined range of hard or soft movable container, These containers. a) has the following capacity. 1) Ⅱ Ⅲ class Packing and packaging for containing solid and liquid is not more than 3.0m3 (3000L); 2) class Ⅰ packaging solid, such as when mounted on flexible, rigid plastics, composite, fibreboard and wooden IBCs not more than 1.5m3; 3) class Ⅰ packaging solid, such as mounted on the metal intermediate bulk containers of not more than 3.0m3. b) Design of mechanical handling; c) be able to withstand handling and transportation stresses generated, the stress is determined experimentally. 3.2 Housing or housing body Receptacle itself, including the opening and closing means, but does not include auxiliary equipment. Apply outside the composite intermediate bulk containers of all categories The intermediate bulk containers. 3.3 Handling device handingdevice A variety of rings, ring, hook and eye fixed on the frame and intermediate bulk containers or tank material extending from the housing formed (for software IBC). 3.4 Liner liner Additional pipe or tank bags, including intermediate bulk closure of its opening, but do not constitute a box (for flexible container, fibreboard and wood ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 0987.1-2013_English be delivered?

Answer: Upon your order, we will start to translate SN/T 0987.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 0987.1-2013_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 0987.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 0987.1-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0987.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.