SN/T 0892-2010 English PDFUS$449.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 0892-2010: Rules for the inspection of cargo weighing and measurements for import and export commodities Status: Valid SN/T 0892: Historical versions
Basic dataStandard ID: SN/T 0892-2010 (SN/T0892-2010)Description (Translated English): Rules for the inspection of cargo weighing and measurements for import and export commodities Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: A10 Word Count Estimation: 17,145 Date of Issue: 2010-11-01 Date of Implementation: 2011-05-01 Older Standard (superseded by this standard): SN/T 0892-2000 Quoted Standard: SN/T 0188.3 Regulation (derived from): National Quality Inspection (2010) 582 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the import and export commodity cargo requirements and methods of measurement. This standard applies to cargo import and export commodities measured. SN/T 0892-2010: Rules for the inspection of cargo weighing and measurements for import and export commodities---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection of cargo weighing and measurements for import and export commodities People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 0892-2000 Import and export commodity inspection of cargo measure Issued on. 2010-11-01 2011-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordInstead of the standard SN/T 0892-2000 "cargo import and export commodities inspection procedures to measure," this standard compared with the original standard, in addition to editorial Modify outside the main technical changes as follows. --- Increasing the terms and definitions; --- Increase the basic requirements; --- Increasing the units of measurement and processing of the mantissa; --- Added Appendix content; --- Remove the pommel horse leg measured and calculated in the original standard Appendix D. Appendix A of this standard is an informative annex, Annex B, Appendix C, Appendix D, Appendix E, Appendix F normative appendix. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. Tianjin People's Republic of China Exit Inspection and Quarantine, People's Republic of China Liaoning Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Tang Feng, Li Gong, Zhou full of red, Tang Hongbing. This standard previously issued as follows. --- SN/T 0892-2000. Import and export commodity inspection of cargo measure1 ScopeThis standard specifies the requirements and methods to measure the cargo import and export commodities. This standard applies to cargo import and export commodities measured.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. SN/T 0188.3 Import and Export weight survey by scale vehicle weighing procedures Akishige3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Cargo measure cargoweighingandmeasurements Cargo measure is the use of scales and gauges to measure the weight and volume of cargo carried. 3.2 Stowage factor stowagefactor Stowage factor refers to the volume per unit weight of the goods to the formula (1). SF = ΣVcΣW (1) Where. SF --- stowage factor, in units of cubic meters/kg (m3/kg); Vc --- cargo volume, in units of cubic meters (m3); The W --- cargo weight in kilograms (kg). 3.3 Full scale measurement maximummeasurement Shipments were measured on three dimensions size of the largest sites, including prominent parts on the package size of the shipment, and then multiplied shipment volume. 3.4 Fold amount superpositionmeasurement After measuring the overall stacked two or two or more cargo. 3.5 Fight amount juxtapositionmeasurement After the fight the whole measuring rope two or two or more cargo. 3.6 Reduction abatementmeasurement Shipments of protruding parts measured by a certain percentage calculations. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 0892-2010_English be delivered?Answer: Upon your order, we will start to translate SN/T 0892-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 0892-2010_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 0892-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 0892-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0892-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
