SN/T 0775-2005 English PDFUS$519.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 0775-2005: Rule of inspection for import and export cotton Status: Obsolete SN/T 0775: Historical versions
Basic dataStandard ID: SN/T 0775-2005 (SN/T0775-2005)Description (Translated English): Rule of inspection for import and export cotton Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: B32 Classification of International Standard: 65.020 Word Count Estimation: 13,157 Date of Issue: 2005-02-17 Date of Implementation: 2005-07-01 Older Standard (superseded by this standard): SN/T 0775-1999 Regulation (derived from): Industry standard filing Notice 2005 No. 4 (No. 64 overall); National Quality recognize [2010] No. 582 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China Summary: This standard specifies: import and export of cotton sampling, testing and test results treatment. This standard applies to: Import Upland lint test, other types lint test may refer to. SN/T 0775-2005: Rule of inspection for import and export cotton---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Rule of inspection for import and export cotton Book of the People's Republic of China Entry and Exit Inspection and Quarantine Replace SN/T 0775-1999 Import and export cotton inspection procedures Released on.2005-02-17 2005-07-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordThe revision of this standard is based on the development of international cotton trade and changes in international cotton standards, as well as two major revisions of GB 1103. And proceeded. In addition to the latest standards and methods for cotton fiber testing in ISO and ASTM, this revision will also include GB 1103- The relevant content of.1999 was introduced into this standard. This standard is an amendment to SN/T 0775-1999. The main changes are as follows. --- Revised the scope, clarified the standard scope of application for lint cotton lint inspection, other types of lint inspection can refer to carried out; --- Adjusted some terms and definitions; --- Micronaire test adds Micronaire test method; --- Strength test has been added to the Stelometer beam fiber breaking strength test method; --- Increased short fiber rate test; --- Increased the knot test; --- Added cotton packaging logo; --- Clarified the principles that should be followed for HVI testing requirements. This standard replaces SN/T 0775-1999 from the date of implementation. Appendix A, Appendix B, Appendix C, Appendix D, and Appendix E of this standard are normative appendices. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. Hebei Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shanghai Entry-Exit Inspection and Quarantine Bureau, Beijing Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Jiangsu Entry-Exit Inspection and Quarantine Bureau of the People's Republic The main drafters of this standard. Gao Youjun, Lian Sumei, Zhang Nianzu, Zhou Zhengyu, Yang Annan, Wu Hao. The previous versions issued by this standard are as follows. ---WM3003-1987, WM3004-1987; ---SN/T 0775-1999. Import and export cotton inspection procedures1 ScopeThis standard specifies the processing of sampling, inspection and inspection results for imported and exported cotton. This standard applies to the lint inspection of imported and exported fine cotton, and other types of lint inspection can be implemented.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all The new version does not apply to this standard, however, parties to agreements based on this standard are encouraged to study whether the latest version of these documents can be used. this. For undated references, the latest edition applies to this standard. GB 1103 cotton fine cotton GB/T 6102.1 Raw cotton moisture regain test method oven method GB/T 6102.2 original cotton moisture regain test method electric detector method GB/T 6499 raw cotton impurity rate test method Simulated neon lighting of GB/T 13786 cotton classification room SN/T 1512 import and export cotton inspection method HVI test method3 Terms and definitionsThe following terms and definitions apply to this standard. 3.1 In a batch of cotton grade inspection, it contains cotton of adjacent grades, of which the proportion is 80% or more. 3.2 In a batch of cotton length test, the number of samples only accounts for 80% or more of the length. 3.3 The micronaire value was determined according to the different micronaire values of the test batch, and the largest proportion of the clones was the main micronaire value of the batch of cotton. 3.4 According to the grade conditions of the corresponding text standards, countries select the physical standard samples made by the corresponding representative cottons for comparison. Assess cotton grade. 3.5 A physical sample produced by either or both parties to the trade, approved by both parties and used as a basis for inspection (may represent part or all of Quality indicator). 3.6 Non-cotton fibrous material (including cotton fibers fixed to it) blended into lint during picking, storage, or ginning. Such as sand, cotton branches, Broken leaves, bell shells, insects, worms, cottonseed, seed cotton, broken seeds, infertile seeds, fiber seed chips, soft seed skin and so on. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 0775-2005_English be delivered?Answer: Upon your order, we will start to translate SN/T 0775-2005_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 0775-2005_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 0775-2005_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 0775-2005?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0775-2005 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
