SN/T 0740-2010 English PDF

US$159.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 0740-2010: Rules for inspection of gunny bags for import and export
Status: Valid

SN/T 0740: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 0740-2010	159	Add to Cart	3 days	Rules for inspection of gunny bags for import and export	Valid
SN/T 0740-1997	279	Add to Cart	3 days	Rules for inspection of gunny bag for export	Obsolete

Similar standards

GB/T 16984   

Basic data

Standard ID: SN/T 0740-2010 (SN/T0740-2010)
Description (Translated English): Rules for inspection of gunny bags for import and export
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: W33
Classification of International Standard: 55.080
Word Count Estimation: 6,674
Date of Issue: 2010-03-02
Date of Implementation: 2010-09-16
Older Standard (superseded by this standard): SN/T 0740-1997
Quoted Standard: GB/T 2828.1; GB/T 3923.1; GB/T 4668
Regulation (derived from): National Quality Inspection (2010) 98; industry standard filing Notice 2010 No. 5 (No. 125 overall)
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the import and export of jute sacks of sampling, testing and results of the determination. This standard applies to jute, kenaf as the main raw material of woven sacks Export Inspection.

SN/T 0740-2010: Rules for inspection of gunny bags for import and export

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for inspection of gunny bags for import and export Exit inspection and quarantine industry standard book People's Republic of China Instead of the SN/T 0740-1997 Inspection of import and export jute sacks Issued on. 2010-03-02 2010-09-16 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

Instead of the standard SN/T 0740-1997 "exports of jute sacks for the inspection." This standard compared with SN/T 0740-1997, the main changes are as follows. --- Standard name from the "export of jute sacks for the inspection" to "import and export of jute sacks for the inspection"; --- Standard overall structure of the changes; --- The scope was revised to apply to the import and export of jute sacks test content; --- Abolition of the "definitions, symbols" section; --- The original standard Chapter 4, "technical requirements" and Chapter 5, "test project" merged into Chapter 3, "Requirements", and subdivided into Chapter 3.1 "Appearance quality requirements" and Chapter 3.2 "Internal quality requirements"; --- Sampling program further refined into appearance of the test sample, the size of sacks, needle and thread count density test sample, broken Pub crack strength and quality inspection sampling; --- Increased Chapter 7, "Packaging and Identification"; --- Appendix removed content "sack visual inspection condition". Appendix A of this standard is an informative annex. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard is mainly drafted by. People's Republic of China Exit Inspection and Quarantine of Henan, Shandong, People's Republic of China Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Wang Jianzhong, Zhou Baohua, Wang Shengqi, Geng Hui Zhou, Liu Yong club. This standard was first published in 1997, this is the first revision. Inspection of import and export jute sacks

1 Scope

This standard specifies the requirements for the import and export of jute sacks, sampling, testing and judging the results. This standard applies to jute, kenaf as raw materials import and export inspection and woven sacks.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 3923.1 Textiles Tensile properties of fabrics - Part 1. breaking force and elongation Strip method Determination of GB/T 4668 woven fabric density

3 Requirements

3.1 Appearance quality requirements Jute sacks should look no defects affect the use, there should be following defects (see Appendix A). Holes, dilute block, warp, weft, weaving wrong, oil, stitched bad, bad seam and the like. 3.2 Internal quality requirements The inherent requirements of jute sacks of the following. sack size, conventional mass, Density, needle density, breaking strength. Specific indicators Product requirements by importing countries.

4 Sampling

4.1 appearance of the test sample Visual inspection of the sample according to GB/T 2828.1 in normal inspection single sampling plan, general inspection level Ⅰ, acceptance quality limit AQL = 4, sample testing program test are shown in Table 1. Table 1 Appearance inspection sampling plan Bulk sample size N number Ac like receiving rejection number Re ≤15 2 0 1 16 to 25,301 26 to 90,501 91 ~ 150812 151 ~ 2801312 281 ~ 5002023 501 ~ 12,003,234 ≥1201 50 5 6 4.2 Internal inspection sampling During internal quality control sample, the size of sacks, needle and thread count density of sample testing program are shown in Table 1; breaking force and public ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 0740-2010_English be delivered?

Answer: Upon your order, we will start to translate SN/T 0740-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 0740-2010_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 0740-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 0740-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0740-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.