SN/T 0611-2014 English PDFSN/T 0611: Historical versions
Basic dataStandard ID: SN/T 0611-2014 (SN/T0611-2014)Description (Translated English): Rule for inspection of steel wire rope for export Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: H49 Classification of International Standard: 77.140.65 Word Count Estimation: 12,176 Older Standard (superseded by this standard): SN/T 0611-1996 Quoted Standard: GB/T 228.1; GB/T 238; GB/T 239.1-2012; GB/T 1839; GB/T 2104; GB/T 8358; GB 8918-2006; GB/T 20118-2006; GSB H49001; SN/T 0002.1-2012; SN/T 0570 Regulation (derived from): AQSIQ notification issued in 2014 on the first batch of 230 industry-standard entry-exit inspection and quarantine Issuing agency(ies): General Administration of Customs Summary: This Standard specifies the export rope sampling, inspection and test results of the determination. This Standard is applicable to the export inspection machinery, construction, shipping, fisheries, forestry, mining, drilling, use lifts and cable cars and SN/T 0611-2014: Rule for inspection of steel wire rope for export---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Export rope inspection procedures) People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 0611-1996 Export inspection of wire rope Issued on. 2014-01-13 2014-08-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard SN/T 0611-1996 "export inspection of the rope." This standard compared with SN/T 0611-1996, major change Of the following. --- Increasing the terms and definitions; --- Changing the definition of "inspection lot" of; --- Increased inspection and supervision model and description of test methods; --- Increased inspection requirements for type testing; --- Increased compliance verification inspection requirements; --- For the first time the production of export products of enterprises, increasing the requirement for type testing; --- Abolition of the "ISO 9000 series of standards by the international certification of enterprises, the use of the relaxation test" clause; --- Clear sampling basis; --- Refined appearance inspection diameter measurement requirements; --- Quality inspection of the wound to remove the test; --- Quality inspection sampling requirements increased zinc coating weight detection; --- Increased testing and the results of determination of radioactive contamination; --- Modify the weight inspection requirements; --- Test results determination, the re-examination of the same resampled from the original disc is changed to the same; --- Check results judging, delete the additional tests qualified the "include re-examination"; --- Increased qualified criticism given. Please note that some content of this document may involve patents, the issuing authority of this document does not assume responsibility for the identification of these patents. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Wang Jie, Wang Jin Tao, fire Zhu Yan, the new light soup, Wangchen Yue, Ding Wei. This standard replaces the standards previously issued as follows. --- SN/T 0611-1996. Export inspection of wire rope1 ScopeThis standard specifies the export rope sampling, inspection and test results of the determination. This standard applies to machinery, construction, shipping, fisheries, forestry, mining, drilling, lifts and cable cars such as the use of a variety of round strand wire rope and iso Stock-export inspection of steel cord. This standard does not apply to aviation wire rope and wire rope elevators.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. RT Test Method. Test Part 1 GB/T 228.1 metallic materials tensile GB/T 238 metal wire repeated bending test method for materials GB/T 239.1-2012 metal wire material - Part 1. Single torsion test method GB/T 1839 quality steel products galvanizing layer test method GB/T 2104 General provisions rope packaging, marking and quality certificate GB/T 8358 rope breaking tensile test method GB 8918-2006 Wire Rope important uses GB/T 20118-2006 General Purpose Wire Rope GSBH49001 rope defects national standard sample (sample photos) The basic provisions of SN/T 0002.1-2012 inspection of import and export of electromechanical products prepared Radioactive waste SN/T 0570 for imported raw materials contaminated inspection procedures3 Terms and DefinitionsSN/T 0002.1 and define the following terms and definitions apply to this document. 3.1 Inspection Lot inspectionlot Each batch by the same structure, the same nominal diameter, nominal tensile strength of the same, the same rope twist method and the same composition of the surface state. 3.2 Normal inspection normalinspection When the process is better than the average accepted method of use quality limit sampling scheme. At this sampling plan has to ensure the production side with a high probability The rate of acceptance and design acceptance criteria. When there is no reason to doubt that the process is different from the average may receive a certain level, the normal test. 3.3 Tightened inspection rigorousinspection Having one to use than the corresponding normal inspection sampling program acceptance criteria more stringent acceptance criteria of the sampling scheme. When the result of successive batches of a predetermined ratio may indicate that the process average limit when poor reception quality, conduct tightened inspection. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 0611-2014_English be delivered?Answer: Upon your order, we will start to translate SN/T 0611-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 0611-2014_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 0611-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 0611-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0611-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
