SN/T 0504-2012 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 0504-2012	439	Add to Cart	3 days	Rules for inspection of locks for import and export. General requirements	Obsolete
SN/T 0504-1995	439	Add to Cart	4 days	Rules for inspection of locks for export	Obsolete

Similar standards

SN/T 3879   QB/T 3826   QB/T 1924   SN/T 4511   

Basic data

Standard ID: SN/T 0504-2012 (SN/T0504-2012)
Description (Translated English): Rules for inspection of locks for import and export. General requirements
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: Y73
Word Count Estimation: 11,169
Older Standard (superseded by this standard): SN/T 0504-1995
Quoted Standard: GB/T 2828.1; QB 1001-2006; QB 1621-1992; QB 1918-1993; QB/T 2473-2000; QB/T 2474-2000; QB/T 2475-2000; QB/T 2476-2000; SN/T 0002
Regulation (derived from): National Quality Inspection (2012) 643; industry standard filing Notice 2013 No. 1 (No. 157 overall)
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies requirements for import and export locks sampling, testing and results of determination. This standard applies to import and export door locks, bicycle locks, furniture locks and marbles marbles padlock import and export inspection

SN/T 0504-2012: Rules for inspection of locks for import and export. General requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for inspection of locks for import and export.General requirements People's Republic of China Entry-Exit Inspection and Quarantine Standards Instead of the SN/T 0504-1995 General requirements for the inspection of import and export Locks Issued on. 2012-10-23 2013-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Instead of the standard SN/T 0504-1995 "export inspection of locks." This standard compared with SN/T 0504-1995, the main technical changes are as follows. --- Standard GB 8385 "exterior double bolt lock" Adjust for QB/T 2473-2000 "exterior door"; --- Standard GB 8386 "Mortise locks" Adjust for QB/T 2474-2000 "Mortise lock"; --- Standard GB 8387 "blade mortise lock" Adjust for QB/T 2475-2000 "blade mortise lock"; --- Standard GB 8388 "ball locks" Adjust for QB/T 2476-2000 "ball locks"; --- QB1001-1990 "bike locks" adjust for QB1001-2006 "bike lock." This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Guangdong CIQ. The main drafters of this standard. Chen hair, pale Yasukuni, Wu Jinchang, Luliang Sheng, Li Jihua, Zhou Yinfang. This standard replaces the standards previously issued as follows. --- SN/T 0504-1995.

Introduction

"Lock the inspection of import and export," the import and export inspection work in accordance with the lock, the lock on the import and export inspection and specification play a guiding role. With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established system. This standard belongs to the inspection and quarantine standards on the third floor --- categories of common standards, provides for import and export inspection and locks General requirements. General requirements for the inspection of import and export Locks

1 Scope

This standard specifies the locks on the import and export of sampling, testing and the results of determination. This standard applies to door import and export, import and export inspection and bicycle locks, furniture locks and marbles marbles padlock, locks Importers and other structures The test can refer to use.

2 Normative references

The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan QB1001-2006 bicycle lock QB1621-1992 marble furniture locks QB1918-1993 marbles padlock QB/T 2473-2000 exterior door locks QB/T 2474-2000 Mortise locks QB/T 2475-2000 blade mortise lock QB/T 2476-2000 spherical locks The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared

3 Terms and Definitions

GB/T 2828.1, SN/T 0002 defined by the following terms and definitions apply to this document 3.1 Sampling mode modeofsamplinginspection According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities. 3.2 Type Test mode modeoftypetest According to a predetermined cycle in accordance with the relevant national technical specification requirements for type testing, according to the scene to examine the provisions of the product lot testing, And supervise the implementation of conformity assessment activities of the enterprise quality management system. 3.3 Inspection Lot inspectionlot To carry out the inspection and collection of the same specifications, models produced under the same conditions of production per unit of product, referred to as batch.

4 General requirements

4.1 Performance Requirements Importers lock product performance should be consistent with national standards. Consider using national (regional) applicable standards and trade ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 0504-2012_English be delivered?

Answer: Upon your order, we will start to translate SN/T 0504-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 0504-2012_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 0504-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 0504-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0504-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.