SN/T 0319.1-2013 English PDFSN/T 0319.1: Historical versions
Basic dataStandard ID: SN/T 0319.1-2013 (SN/T0319.1-2013)Description (Translated English): Rules for the inspection of air compressors for import and export. Part 1: General requirements Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: J72 Classification of International Standard: 23.140 Word Count Estimation: 8,862 Quoted Standard: GB/T 191; GB/T 2828.1; GB/T 3853-1998; GB/T 4980-2003; GB/T 7777-2003; GB/T 15487-1995; GB/T 16665; GB 19153-2009; GB 22207-2008; SN/T 0002 Regulation (derived from): AQSIQ notification issued in 2013 on the first batch of 179 entry-exit inspection and quarantine of industry standards; industry standard for filing Notice 2013 No. 9 (No. 165 overall) Issuing agency(ies): General Administration of Customs Summary: This standard specifies the import and export air compressor (hereinafter referred to as "compressor") test requirements, test methods and passing judgment. This standard applies to products of HS codes for the import and export 841 480 air compressor tes SN/T 0319.1-2013: Rules for the inspection of air compressors for import and export. Part 1: General requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection of air compressors for import and export Part 1. General requirements People's Republic of China Entry-Exit Inspection and Quarantine Standards Inspection of import and export air compressor Part 1. General requirements Part 1. Generalrequirements Issued on. 2013-03-01 2013-09-16 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordSN/T 0319 "for the inspection of import and export air compressor" is divided into two parts. --- Part 1. General requirements; --- Part 2. Miniature reciprocating piston air compressor. This section SN/T Section 10319 of. This section drafted in accordance with GB/T 1.1-2009 given rules. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section is responsible for drafting the People's Republic of China Jiangsu CIQ. The main drafters of this section. Jian Ye Valley, Schaeffer. Inspection of import and export air compressor Part 1. General requirements1 ScopeSN/T 0319 provisions of this part of the import and export air compressor (hereinafter referred to as "compressor") inspection requirements, test methods and conformity determination. This section applies to products of HS Code is 841 480 import and export air compressor test.2 Normative referencesThe following documents for the application of this document is essential, dated references, only the dated version suitable for use herein Member, undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 3853-1998 displacement compressors Acceptance Test Determination of GB/T 4980-2003 displacement compressor noise GB/T 7777-2003 displacement compressors mechanical vibration measurement and evaluation GB/T 15487-1995 displacement compressor flow measurement method GB/T 16665 air compressor unit and air system energy detection method GB 19153-2009 displacement air compressors energy efficiency limit value and energy efficiency rating Safety requirements GB 22207-2008 displacement air compressors The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared3 Terms and DefinitionsGB/T 2828.1, SN/T 0002 defined by the following terms and definitions apply to this document. 3.1 Sampling mode modeofsamplinginspection According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping batches embodiment qualified sampling, testing and verification determination activities. 3.2 Type Test mode modeoftypetest Mandatory requirements according to national technical specifications type testing, according to the scene to examine the provisions of the product lot testing, and quality of enterprises The amount of qualified supervision and management system implementation determination activities. 3.3 Conformity assessment model modeofcomplianceverification According to the mandatory requirements of national technical specifications, technical documentation and inspection by qualified sampling necessary for compliance of goods made Assessment activities. 3.4 Inspection Lot inspectionlot The same specifications and implementation of sampling collection, model, produced under the same conditions of production per unit of product, referred to as batch. ...... |
