SN/T 0030-2012 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 0030-2012	439	Add to Cart	3 days	Rules for the inspection of standardized fasteners for import and export. General requirements	Obsolete
SN 0030-1992	799	Add to Cart	3 days	Rule for inspection of faasteners for export	Obsolete

Similar standards

GB/T 32.3   GB/T 32.1   GB/T 41   

Basic data

Standard ID: SN/T 0030-2012 (SN/T0030-2012)
Description (Translated English): Rules for the inspection of standardized fasteners for import and export. General requirements
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: J13
Word Count Estimation: 11,173
Older Standard (superseded by this standard): SN/T 0030-1992
Quoted Standard: GB/T 90.1; GB/T 94.1; GB/T 94.2; GB/T 94.3; GB/T 944.1; GB/T 2828.1-2003; GB/T 3098.1; GB/T 3098.2; GB/T 3098.3; GB/T 3098.4; GB/T 3098.5; GB/T 3098.6; GB/T 3098.7; GB/T 3098.10; GB/T 3098.11; GB/T 3098.15; GB/T 3098.16; GB/T 3103.1; GB/T 3103.3; GB/T 393
Regulation (derived from): National Quality Inspection (2012) 643; industry standard filing Notice 2013 No. 1 (No. 157 overall)
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies requirements for import and export standard fasteners sampling, inspection and judgment. This standard applies to bolts, screws, studs, nuts, washers, wood screws, drywall screws, self tapping screws, thread rolling screws and rela

SN/T 0030-2012: Rules for the inspection of standardized fasteners for import and export. General requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of standardized fasteners for import and export.General requirements People's Republic of China Entry-Exit Inspection and Quarantine Standards Replacing SN 0030-1992 Inspection of import and export of standard fasteners General requirements Issued on. 2012-10-23 2013-05-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces SN 0030-1992 "export inspection of fastener." This standard compared with SN 0030-1992, the main technical changes are as follows. --- Different scope This standard applies to the import and export of standard fasteners, the original standard applies only to exports of fasteners; --- With "representative number of specifications to each representative series product nominal diameter of the total number of sample size determination" instead of Original standard "number of segments in three dimensions specifications to determine the number of representative standard" requirement; --- With "receive data representative specifications Ac" instead of "sub-unit failure F" as a representative basis for determining the specifications; --- To "non-systematic defect" instead of "hybrid products"; --- Introduction of coating thickness testing, and as a Class A defect; --- To "surface defects" instead of "a class of surface defects and surface defects II", and the use of non-destructive testing and destructive testing. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Ma Zhenxiong Ma know Meng, Chen and Tian. This standard was first published in 1992 and this is the first revision. This standard replaces the standards previously issued as follows. --- SN 0030-1992.

Introduction

"Importers and standard fasteners for the inspection General requirements" standard fasteners import and export inspection work in accordance with the import and export standard tight Firmware testing play a guiding and regulating. With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established system. This standard belongs to the inspection and quarantine standards on the third floor --- categories of common standards, provides for import and export of standard fasteners inspection General requirements. Inspection of import and export of standard fasteners General requirements

1 Scope

This standard provides for the import and export of standard fasteners sampling, testing and judgment. This standard applies to bolts, screws, studs, nuts, washers, wood screws, drywall screws, self-tapping screws, rolling screws and related fasteners. its He fastener also with reference to these standards.

2 Normative references

The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 90.1 Fasteners acceptance inspection GB/T 94.1 spring washers spring washers GB/T 94.2 toothed spring washers, serrated lock washer GB/T 94.3 saddle-shaped spring washers, wave spring washers GB/T 944.1 screws with a cross groove GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs GB/T 3098.2 Mechanical properties of fasteners coarse thread GB/T 3098.3 Mechanical properties of fasteners Set screws GB/T 3098.4 Mechanical properties of fasteners fine tooth nut GB/T 3098.5 Mechanical properties of fasteners self-tapping screws GB/T 3098.6 Mechanical properties of fasteners stainless steel bolts, screws and studs GB/T 3098.7 Mechanical properties of fasteners rolling screws GB/T 3098.10 Mechanical properties of fasteners non-ferrous metal manufacturing bolts, screws, studs and nuts GB/T 3098.11 Mechanical properties of fasteners drilling tapping screws GB/T 3098.15 mechanical properties of stainless steel fasteners Nuts GB/T 3098.16 mechanical properties of stainless steel fasteners Set screws GB/T 3103.1 Tolerances for fasteners - Bolts, screws, studs and nuts GB/T 3103.3 Tolerances for fasteners flat washer GB/T 3934 common thread gauge technical conditions GB/T 5267.1 fasteners plating layer GB/T 5267.2 fasteners non-electrolytic zinc flake coating GB/T 5779.1 Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements GB/T 5779.2 nut fastener surface defects GB/T 5779.3 Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements JB/T 9151.1 Test Method fastener size and geometric precision bolts, screws, studs and nuts ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 0030-2012_English be delivered?

Answer: Upon your order, we will start to translate SN/T 0030-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 0030-2012_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 0030-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 0030-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0030-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.