SN/T 0007.1-2016 English PDFUS$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 0007.1-2016: General rules for drafting inspection standards of import and export light industrial products--Part 1: Inspection procedure Status: Valid SN/T 0007.1: Historical versions
Basic dataStandard ID: SN/T 0007.1-2016 (SN/T0007.1-2016)Description (Translated English): General rules for drafting inspection standards of import and export light industrial products--Part 1: Inspection procedure Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Y04 Word Count Estimation: 14,116 Date of Issue: 2016-06-28 Date of Implementation: 2017-02-01 Older Standard (superseded by this standard): SN/T 0007-2009 Regulation (derived from): State-Quality-Inspection-Accredidation [2016] No.318 Issuing agency(ies): General Administration of Customs SN/T 0007.1-2016: General rules for drafting inspection standards of import and export light industrial products--Part 1: Inspection procedure---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. General rules for drafting inspection standards of import and export light industrial products - Part 1. Inspection procedure People's Republic of China Entry - Exit Inspection and Quarantine Industry Standard Replacing SN/T 0007-2009 Import and export of light industrial product testing standards prepared by the basic provisions Part 1. inspection procedures lightindustrialproducts-Part 1. Inspectionprocedure 2016-06-28 released 2017-02-01 implementation People's Republic of China State Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 0007 "import and export of light industrial product testing standards prepared by the basic provisions" is divided into two parts. - Part 1. Inspection procedures; Part 2. Test methods. This part is part 1 of SN/T 0007. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part together with Part 2 together with SN/T 0007-2009 "import and export of light industrial products inspection procedures, test methods to prepare the basic standards Regulations ". This section compares with SN/T 0007-2009 as follows. - modified the "2 normative reference document" (see Chapter 2, Chapter 2 of the.2009 edition); - the six terms and definitions specified in "3 Terms and Definitions" were deleted, and they were modified to refer to GB/T 1.1, GB/T.20000.1, GB/T 27000, SN/T 2755.1 (see Chapter 3, Edition 3.1, Rev. 3.1); - the contents of the "4 requirements" in the relevant standard of test methods were deleted, and "inspection basis" and "inspection contents" were added (see 4.3, 2009 edition of 4.3,4.4,4.5); --- "the typical elements of the standard arrangement of the example" modified to "structure and the preparation of the order", the structure of the map made a change (See Chapter 5, Chapter 5 of the.2009 edition); - the contents of the "normative general elements" in the relevant standard of test methods were deleted and their contents were modified (see paragraph Chapter 7, Chapter 7 of the.2009 edition); - Adjust the structure of the "normative technical elements" in accordance with the provisions of Chapter 5, "Normative technical requirements" in this section. Applicability Modifications (see Chapter 8, Chapter 8 of the.2009 edition). This part of the State Certification and Accreditation Administration Committee proposed and centralized. The drafting unit. Hunan Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shenzhen Entry-Exit Inspection and Quarantine of the People's Republic of China Bureau of Fujian Entry - Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this part. He Peng, Zhou Bo, Xu Rong, Yi Zhengxuan, Chen Xuecan, Li Xiaojing, Zhou Weidong, Li Kai. This part of the previous version of the standard to replace the release of the situation. --- SN/T 0007-2009. Import and export of light industrial product testing standards prepared by the basic provisions Part 1. inspection procedures1 ScopeSN/T 0007 this part of the provisions of the import and export of light industrial products inspection procedures (hereinafter referred to as the inspection procedures) prepared by the basic requirements, structure And the order of writing. This part applies to the preparation of inspection procedures for import and export of light industrial products.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 1.1-2009 Guidelines for standardization work Part 1. Structure and preparation of standards GB/T.20000.1 Standardized Work Guide Part 1. General terms for standardization and related activities Conformity assessment vocabulary and general principles GB/T 27000-2006 General requirements for classification management of industrial products for export industrial products Basic requirements for classification of industrial products for export classification SN/T 2755.3-2011 Basic requirements for the supervision and management of the classification of industrial products for export industrial products SN/T 2755.4-2011 Export Industrial Products Enterprise Classification Management Product Risk Classification Basic Requirements3 terms and definitionsGB/T 1.1, GB/T.20000.1, GB/T 27000, SN/T 2755.1 The terms and definitions defined apply to this document.4 requirements4.1 Write rules The rules for the preparation of inspection procedures shall comply with the provisions of GB/T 1.1. 4.2 constitute the principle Shall be properly classified according to the classification of the goods according to the requirements of the professional standard system of entry-exit inspection and quarantine inspection (see Appendix A) Develop inspection procedures. Generally to the same category of products or a single product for the development of standards, when the standard part of the content has been published with the standard Quasi-identical, can be directly quoted; generic standards have been or can cover a single product, no longer for the kind of product Standard; a category of different types of products, the contents of the test and the requirements of the distinction between the larger, according to the type of sub-standard; a certain or a Categories of products imported and export inspection content and requirements of a larger difference, the import and export of two parts to develop standards; a certain or a category Product inspection procedures involved in the technical requirements of the more content, will lead to test procedures text is too large and affect the use, the technology can be Seeking content to be developed into a separate use of the general technical requirements of the standard. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 0007.1-2016_English be delivered?Answer: Upon your order, we will start to translate SN/T 0007.1-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 0007.1-2016_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 0007.1-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 0007.1-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 0007.1-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
