SN/T 0002.2-2012 English PDFUS$289.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 0002.2-2012: General stipulation for drafting of standards on inspection method of mechanical and electrical commodity for import and export Status: Valid
Basic dataStandard ID: SN/T 0002.2-2012 (SN/T0002.2-2012)Description (Translated English): General stipulation for drafting of standards on inspection method of mechanical and electrical commodity for import and export Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: A00 Word Count Estimation: 11,115 Quoted Standard: GB/T 1.1-2009; GB/T 20000.3; GB/T 20001.1; SN/T 0002.1 Regulation (derived from): National Quality Inspection (2012) 237; industry standard filing Notice 2012 No. 9 (No. 153 overall) Issuing agency(ies): General Administration of Customs Summary: This standard specifies test methods for import and export of electromechanical products, measurement methods, test method (hereinafter referred to as "test method"), etc., or to test the methods class industry standards-based approach to write the basic SN/T 0002.2-2012: General stipulation for drafting of standards on inspection method of mechanical and electrical commodity for import and export---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. General stipulation for drafting of standards on inspection method of mechanical and electrical commodity for import and export People's Republic of China Entry-Exit Inspection and Quarantine Standards Import and export of electromechanical products standard test method Preparation of basic provisions Issued on. 2012-05-07 2012-11-16 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released ForewordSN/T 0002 is divided into two parts. --- Part 1. mechanical and electrical products import and export inspection procedures prepared by the basic provisions; --- Part 2. import and export of electromechanical products to prepare the basic provisions of standard testing methods. This section SN/T 0002 Part 2. This section according to GB/T 1.1-2009. Drafting Rules "Standardization Guide Part 1 standard structure and preparation of" given. This section proposed and managed by the National Certification and Accreditation Administration Committee. This section was drafted by. People's Republic of China, Xiamen Entry-Exit Inspection and Quarantine Shanghai People's Republic of China Bureau, the Shenzhen People's Republic of China Entry-Exit Inspection and Quarantine Hubei People's Republic of China, People's Republic of China Fujian Exit Inspection and Quarantine. The main drafters of this section. Health and aqua regia, Dufy, Zehua, Hu Zheng group, Lin Miao, Tang Jun, the clock can be front, Wei Yu exhibition, following the bell.IntroductionCurrently, suitable for routine inspection and supervision of import and export of electromechanical products inspection regulations class industry standards are maturing, covering China's major Import and export of mechanical and electrical products. With the development of inspection and supervision work to depth direction and greatly enhance the strength of the test system mechanical and electrical products, national Inspection and quarantine system put forward higher requirements. At the same time, the pace of transformation of mechanical and electrical products of international standards is also accelerating, applicable In particular type testing and inspection, measuring, testing methods import and export of electromechanical products during the test, the measurement methods, test methods for class industry Emerging standards, such as safety testing methods, safety type test methods, energy efficiency testing methods. To further regulate the import and export of electromechanical products Class industry standard test methods to ensure the quality and efficiency of the preparation, to make it more systematic, scientific, applicability and operability, especially the development of this section. Import and export of electromechanical products testing method is an important part of the professional import and export mechanical and electrical inspection industry standard system, the inspection of classes and Requirements class industry standards based technology, is an important basis for the import and export inspection and quarantine agencies to implement inspection and supervision of mechanical and electrical products. According to the relevant provisions of WTO rules and China's "Commodity Inspection Law", the import and export of electromechanical products Inspection and testing methods should be combined Phytophthora actual work, focused on safety, hygiene, health, environmental protection, recycling, energy efficiency, specific testing methods to prepare projects. This section is part of an industry standard system in the second layer of common professional standards. Import and export of electromechanical products standard test method Preparation of basic provisions1 ScopeSN/T 0002 provisions of this part of the import and export of electromechanical products testing methods, measurement methods, test method (hereinafter referred to as "the inspecting Party Basic requirements Law "), etc., or to test methods for class-based industry standard preparation, structure, format, write sequence, content, drafting and presentation Methods. This section applies to the import and export of electromechanical products standard test method (hereinafter referred to as "standard test method") preparation.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 1.1-2009 for standardization - Part 1. Standard structure and drafting GB/T 20000.3 Guide for standardization - Part 3. Reference File Part of GB/T 20001.1 standard rules for the preparation of 1. Terminology The basic provisions of SN/T 0002.1 inspection of import and export of electromechanical products prepared3 Terms and DefinitionsGB/T 1.1, GB/T 20000.3, GB/T 20001.1 and SN/T 0002.1 and established the following terms and definitions apply to this file. 3.1 Test methods inspectionmethod Measurement measurementmethod Test methods testmethod In accordance with prescribed procedures to determine to the proposition given product or more characteristics for processing or to provide specific technical operator services consisting of Methods such as visual inspection, measurement and testing. Sometimes referred to as detection methods, test methods.4 Basic requirements4.1 preparation of standard test methods should be consistent with GB/T 1.1-2009 requirements. 4.2 should be required to import and export mechanical and electrical inspection of the professional industry standard system properly categorized develop standard test methods. Category may refer to SN/T 0002.1. 4.3 For certain categories of products do not belong, separately prepared standard test method for the product. 4.4 standard test method should give priority to international standard method has been published, the regional standard method national standard method of importing countries, Chinese State Home standard method industry standard methods, other methods accepted norms and standards to ensure that the method of the latest valid version, unless that version does not Suitable or impossible to use. 4.5 If the standard test method using non-standard methods, it must be noted and appropriate verification and validation. Verification and validation of the range package ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 0002.2-2012_English be delivered?Answer: Upon your order, we will start to translate SN/T 0002.2-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 0002.2-2012_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 0002.2-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
