SB/T 10792-2012 English PDFUS$449.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SB/T 10792-2012: Pre-mix beverage dispensing equipment Status: Valid
Basic dataStandard ID: SB/T 10792-2012 (SB/T10792-2012)Description (Translated English): Pre-mix beverage dispensing equipment Sector / Industry: Domestic Trade Industry Standard (Recommended) Classification of Chinese Standard: J73 Classification of International Standard: 97.130.20 Word Count Estimation: 17,193 Quoted Standard: GB/T 191; GB/T 1019; GB/T 2423.3; GB/T 2423.17; GB/T 2829-2002; GB 4706.1-2005; GB 4706.72-2008; GB/T 4798.1; GB/T 8059.1-1995; JB/T 4330 Regulation (derived from): ?Ministry of Commerce Announcement 2012 No.58; Industry Standard Filing Announcement 2012 No.12 (Total No.156) Issuing agency(ies): Ministry of Commerce of the People's Republic of China Summary: This standard specifies the technical requirements of cold pre-conditioners, test methods, inspection rules, signs, packaging, transport and storage. This standard applies to commercial and similar uses cold pre-conditioners. This standard applies to comm SB/T 10792-2012: Pre-mix beverage dispensing equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Pre-mix beverage dispensing equipment ICS 97.130.20 J73 Record number. 37650-2012 People's Republic of China domestic trade industry standard Cold drink presetting machine Released on.2012-09-19 2012-12-01 implementation Published by the Ministry of Commerce ContentForeword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 use environment 3 5 Requirements 3 6 Test method 5 7 Inspection rules 8 8 Marking, packaging, transportation, storage and instructions for use 10 Appendix A (informative) Model and meaning of cold drink presetting machine 12ForewordThis standard was proposed by the Ministry of Commerce of the People's Republic This standard is under the jurisdiction of the National Refrigeration Standardization Technical Committee Refrigeration Cabinet Subcommittee. This standard was drafted. Qingdao Haili Commercial Electric Co., Ltd., National Commercial Refrigeration Equipment Quality Supervision and Inspection Center, China Refrigeration Hui, Jimei University. The main drafters of this standard. Wang Taifeng, Gong Yi, Liu Xiaopeng, Xiao Yang, Yin Congxu, Zhang Jianyi.IntroductionWith the development of the economy and the improvement of people's living standards, many beverage companies have developed pre-conditioned drinks in standard volume (bag, box) packaging. It is expected to be sold in the market. They have the common characteristics. large packaging (such as 10L), need to be packaged for sale; need to be stored in a suitable cold In the hidden environment. This requires a new commercial refrigeration unit that can store pre-conditioned beverages in standard volume packaging. When in use, the cup is controlled by controlling the opening and closing of the beverage hose on the package. Based on this demand, the cold drink presetting machine came into being and got it quickly. development of. This standard is of great significance to the requirements and test evaluation of the cold drink presetting machine, and is conducive to the development, production and sales of cold drink presetting machine. Use and management. Cold drink presetting machine1 ScopeThis standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of the cold drink pre-conditioning machine. This standard applies to commercial and similar cold drink pre-conditioning machines. This standard applies to commercial or similar cold drink machines. This standard does not apply to household kitchen machinery (GB 4706.30), such as food mixers, juicers, etc.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 packaging storage and transportation icon GB/T 1019 General rules for the packaging of household and similar electrical appliances GB/T 2423.3 Environmental testing of electric and electronic products - Part 2. Test method test Cab. constant humid heat method GB/T 2423.17 Environmental testing of electric and electronic products - Part 2. Test method test Ka. salt spray GB/T 2829-2002 Periodic inspection count sampling procedures and tables (applicable to the inspection of process stability) GB 4706.1-2005 Safety of household and similar electrical appliances - Part 1. General requirements GB 4706.72-2008 Special requirements for safe commercial vending machines for household and similar electrical appliances GB/T 4798.1 Environmental conditions for application of electric and electronic products - Part 1. Storage GB/T 8059.1-1995 Household Refrigeration Refrigerator JB/T 4330 Determination of noise in refrigeration and air conditioning equipment3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Pre-conditioned beverages with standard volume packaging (bags, boxes) for refrigerated storage, by controlling the opening and closing of beverage hoses on the packaging Equipment for loading cups. Note. Pre-adjusted beverages include, but are not limited to, yogurt, lactic acid bacteria beverages, juices, coffee, carbonated beverages, and tea beverages. 3.2 Cold room coldroom One or more compartments for storage of standard volume packaged beverages between 0 ° C and 10 ° C. 3.3 Control cycle controlcycle A refrigeration system controlled by a temperature control device, during stable operation, between two adjacent starts or stops, A control cycle. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SB/T 10792-2012_English be delivered?Answer: Upon your order, we will start to translate SB/T 10792-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SB/T 10792-2012_English with my colleagues?Answer: Yes. The purchased PDF of SB/T 10792-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
