SB/T 10343-2012 English PDF

US$1449.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
SB/T 10343-2012: Performance Rating of Thermal Storage Equipment Used for Cooling
Status: Valid

SB/T 10343: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SB/T 10343-2012	1449	Add to Cart	8 days	Performance Rating of Thermal Storage Equipment Used for Cooling	Valid
SB/T 10343-2001	RFQ	ASK	11 days	Thermal storage equipment used for cooling	Obsolete

Similar standards

GB/T 10079   GB/T 10870   SB/T 10345.2   SB/T 11048   SB/T 11041   SB/T 10929   

Basic data

Standard ID: SB/T 10343-2012 (SB/T10343-2012)
Description (Translated English): Performance Rating of Thermal Storage Equipment Used for Cooling
Sector / Industry: Domestic Trade Industry Standard (Recommended)
Classification of Chinese Standard: J73
Classification of International Standard: 27.080; 27.200
Word Count Estimation: 59,586
Older Standard (superseded by this standard): SB/T 10343-2001
Quoted Standard: GB/T 7778; GB/T 26194
Adopted Standard: ANSI/ARI Standard 900-2004, NEQ
Regulation (derived from): ?Ministry of Commerce Announcement 2012 No.47; Industry Standard Filing Announcement 2012 No.9 (Total No.153)
Issuing agency(ies): Ministry of Commerce of the People's Republic of China
Summary: This standard specifies the definition of storage devices, classification, test and calibration requirements, published minimum performance calibration data requirements, running operating requirements, marking and nameplate data, and the conditions to be

SB/T 10343-2012: Performance Rating of Thermal Storage Equipment Used for Cooling

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Performance Rating of Thermal Storage Equipment Used for Cooling ICS 27.080; 27.200 J73 Record number. 37190-2012 People's Republic of China domestic trade industry standard Replacing SB/T 10343-2001 Performance calibration of cold storage equipment Published on.2012-08-01 2012-11-01 implementation Published by the Ministry of Commerce

Content

Foreword I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Category 3 5 Test requirements 5 6 Calibration requirements 5 7 Published minimum data required for calibration performance 8 8 mark and nameplate data 8 9 Voluntary compliance 9 Appendix A (Normative Appendix) Test method for accumulating cold storage and refrigerating cycles using the same kind of heat transfer fluid storage device 11 Appendix B (Normative Appendix) Test method for calibrating the sliding type ice-making unit and the ice-cold unit cooling capacity supply device 22 Appendix C (Normative Appendix) Field Test Method for Calibration of Cool Storage Units 30 Appendix D (Normative) Test method for accumulating cold storage devices using different heat transfer fluids for the cold storage cycle and the release cooling cycle 41

Foreword

This standard uses the redrafting method, refer to the American National Standard ANSI/ARIStandard900-2004 "Performance Standard for Cool Storage Equipment" It is compiled and has a degree of consistency with ANSI/ARIStandard 900-2004. This standard was proposed by the Ministry of Commerce of the People's Republic This standard is under the jurisdiction of the National Refrigeration Standardization Technical Committee. This standard was drafted. China Refrigeration Society, Xi'an Jiaotong University, Zhongji Southwest Energy Technology Co., Ltd. The main drafters of this standard. Yu Bingfeng, Hu Wangyang, Li Tiantian, Wang Congfei, Zhang Yunchuan. The release of previous versions of this standard is. ---SB/T 10343-2001. Performance calibration of cold storage equipment

1 Scope

This standard specifies the definition, classification, test and calibration requirements of the cold storage equipment, the minimum data requirements for the published calibration performance, and operation. Operational requirements, marking and nameplate data, and conditions to be followed. This standard applies to cold storage equipment that uses various heat transfer fluids for cold storage and cold release. They can all be assembled by the factory. On-site, or on-site, cold storage equipment that is assembled from factory-supplied components or that follows pre-determined design specifications. This standard does not apply to. --- Cool storage equipment with a cooling capacity of 35.17kWh or less; --- The refrigerant is used as a cold storage device for the refrigerant release fluid; --- Only for heat storage equipment for heating.

2 Normative references

The following documents are indispensable for the application of this standard. For dated references, only dated versions apply to this standard. quasi. For undated references, the latest edition (including all amendments) applies to this standard. GB/T 7778 refrigerant numbering method and safety classification GB/T 26194 cold storage system performance test method

3 Terms and definitions

The following terms and definitions as defined in GB/T 26194 apply to this document. 3.1 Ambient air ambientair The surrounding air of the cold storage device. 3.2 Ambient heat load ambientheatload The load applied to the cold storage device from the heat obtained from the surrounding environment is usually expressed in kW. 3.3 Cooling ice production period buildperiod The operating period of ice production by the cold storage device. 3.4 Coolant fluid chargefluid The heat transfer fluid used to remove heat from the cold storage device or the cold supply device during the cold storage ice production period. 3.5 Cooling period/cold storage cycle chargeperiod/cycle The period of time during which heat is removed from the cold storage device. 3.6 Cooling rate chargerate The rate at which heat is removed from the cold storage device during the cold storage cycle is typically expressed in kW. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SB/T 10343-2012_English be delivered?

Answer: Upon your order, we will start to translate SB/T 10343-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SB/T 10343-2012_English with my colleagues?

Answer: Yes. The purchased PDF of SB/T 10343-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SB/T 10343-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SB/T 10343-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.