QC/T 1226-2025 English PDFUS$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. QC/T 1226-2025: Road vehicles - Shielded balanced cable with a specified bandwidth up to 10 GHz Status: Valid
Basic dataStandard ID: QC/T 1226-2025 (QC/T1226-2025)Description (Translated English): Road vehicles - Shielded balanced cable with a specified bandwidth up to 10 GHz Sector / Industry: Automobile & Vehicle Industry Standard (Recommended) Classification of Chinese Standard: T36 Classification of International Standard: 43.040.10 Word Count Estimation: 38,352 Date of Issue: 2025-05-09 Date of Implementation: 2025-11-01 Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China QC/T 1226-2025: Road vehicles - Shielded balanced cable with a specified bandwidth up to 10 GHz---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT1226-2025ICS 43.040.10CCS T 36 Automobile Industry Standards of the People's Republic of China Released on May 9, 2025 2025-11-01Implementation Shielded balanced cable for road vehicles with bandwidth up to 10 GHz Ministry of Industry and Information Technology of the People's Republic of China issued Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Model Specifications 1 5 Requirements 1 6 Test Methods 11 7 Inspection Rules 18 8 Packaging and packaging marking 21 Appendix A (Informative) Analog Bandwidth, Ethernet Standards and Their Maximum Transmission Rates 22 Appendix B (Informative) Product Structure and Data Table Example 23 Appendix C (Informative) Basic requirements for transmission characteristics measurement 25 Appendix D (Informative) Requirements for Measuring Fixtures 29 Appendix E (Informative) De-embedding procedure 31 Reference 32 Table of ContentsPreface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the Ministry of Industry and Information Technology. This document is under the jurisdiction of the National Technical Committee for Automotive Standardization. This document was drafted by. Shanghai Fuxin Cable Co., Ltd., Chengdu Fusi Automotive Wire Co., Ltd., Shanghai Huawei Technologies Co., Ltd., Changsha Automotive Electrical Equipment Research Institute, SAIC Motor Corporation Limited Technical Center, Pan Asia Technical Automotive Center, Dianlian Technology Co., Ltd. Company, Henan Tianhai Electric Co., Ltd., Luxshare Automotive Technology (Shanghai) Co., Ltd., Dongguan Linjiwei Technology Co., Ltd., AVIC Optoelectronics Technology Co., Ltd., Guizhou Aerospace Electric Co., Ltd., Sichuan Huafeng Technology Co., Ltd., China Academy of Information and Communications Technology, Jinan Youfeng Electronics Co., Ltd. The main drafters of this document are. Wang Yadong, Huo Tianyu, Mei Xiabing, Xiao Biao, Yan Huiru, Xu Wenzhong, Chen Lingling, Xia Sanbao, Zhu Dekang, Sun Jing, Tong Guilin, Guo Desui, Wang Zhiguang, Yin Haomai, Yang Cunka, Huang Wenbin, Wang Xuexi, Duan Hongxun, Hu Sheng, Li Wei, He Wei, Chen Zhenyu, and Huang Li. Shielded balanced cable for road vehicles with bandwidth up to 10 GHz 1 Scope This document specifies the requirements, test methods, inspection and testing of a pair of shielded balanced cables for road vehicles with a signal simulation bandwidth up to 10 GHz. Regulations, packaging and package marking. This document applies to cables for Ethernet communication channels with transmission rates up to 25 Gbit/s for road vehicles (Ethernet channel transmission rate and bandwidth correspondence see Appendix A). NOTE. This document may also be applicable to cables for other network communication systems used in road vehicles, such as PCIe between ECU systems, GMSL between display systems, and FPD‑link, etc. 2 Normative references The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document. document. GB/T 25085.1-2024 Road Vehicle Cables Part 1.Terminology and Design Guide GB/T 25085.2-2024 Road vehicles and motor vehicle cables Part 2.Test methods GB/T 25085.3-2020 Road vehicles and motor vehicle cables Part 3.Single-core copper conductor cables with 30 V AC or 60 V DC Size and requirements QC/T 414-2016 Color specification and model compilation method for automotive wires (cables) 3 Terms and Definitions The terms and definitions defined in GB/T 25085.1-2024 apply to this document. 4 Model Specifications Cable model specifications should be marked according to QC/T 414.Cable model specifications should be indicated in the product data sheet. See Appendix B for examples. 5 Requirements 5.1 Rated voltage The rated voltage is 30 V AC or 60 V DC and below. The rated voltage should be indicated on the product data sheet. 5.2 Rated temperature The cable temperature rating shall be equal to the lowest rating of the insulation and sheath. The cable shall be subjected to a continuous working time of 3,000 hours. Select the rated temperature. The rated temperature grade definition should comply with the provisions of GB/T 25085.1.The rated temperature should be in the product data sheet. Mark. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of QC/T 1226-2025_English be delivered?Answer: Upon your order, we will start to translate QC/T 1226-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of QC/T 1226-2025_English with my colleagues?Answer: Yes. The purchased PDF of QC/T 1226-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |