Q/BQB 302-2023 PDF EnglishUS$125.00 · In stock · Download in 9 seconds
Q/BQB 302-2023: Continuously hot-rolled steel sheet and strip for cold forming Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Q/BQB 302: Historical versions
Similar standardsQ/BQB 302-2023: Continuously hot-rolled steel sheet and strip for cold forming---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBQB302-2023BQB ENTERPRISE STANDARD OF BAOSHAN IRON AND STEEL CO., LTD. Replacing Q/BQB 302-2020 Continuously Hot-Rolled Steel Sheet and Strip for Cold Forming Issued on. APRIL 9, 2023 Implemented on. JULY 1, 2023 Issued by. Baoshan Iron and Steel Co., Ltd. Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Terms and Definitions... 5 4 Classification and Code... 5 5 Information Required for Ordering... 6 6 Size, Shape, Weight and Tolerance... 6 7 Technical Requirements... 7 8 Inspection and Test... 10 9 Packaging, Marking and Inspection Documents... 12 10 Numerical Rounding Rules... 12 11 Appendix... 12 Appendix A (Informative) References of Mechanical Properties... 13 Appendix B (Informative) Comparison Table between this Document and Similar Designations in Relevant Standards... 141 ScopeThis Document specifies the size, shape, technical requirements, inspection and testing, packaging, marking and inspection documents of continuously hot-rolled steel sheet and strip for cold forming. This Document applies to the hot-rolled steel strip for cold forming produced by Baoshan Iron and Steel Co., Ltd., as well as the steel sheet cut horizontally and the steel strip cut longitudinally, hereinafter referred to as steel sheet and strip.2 Normative ReferencesThe provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 222-2006 Permissible Tolerances for Chemical Composition of Steel Products GB/T 223 Chemical Analysis Method of Iron, Steel and Alloy (Applicable Parts) GB/T 228.1-2021 Metallic materials - Tensile testing - Part 1.Method of test at room temperature GB/T 232 Metallic materials – Bend test GB/T 2975 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing GB/T 4336 Carbon and low-alloy steel – determination of multi-element contents – Spark discharge atomic emission spectrometric method (routine method) GB/T 8170 Rules of rounding off for numerical values and expression and judgment of limiting values3 Terms and DefinitionsFor the purposes of this Document, there are no terms and definitions apply.4 Classification and Code4.1 The designations, nominal thickness, uses and product categories of steel sheets and strips are shown in Table 1. 4.2 According to the surface treatment method, it is divided into pickled surface and rolled surface.5 Information Required for Ordering5.1 Users need to provide the following information when ordering. 5.2 Omissions in the ordering contract 5.2.1 If the surface treatment method is not specified, except for designations BRC1, BRC2 and BRC3, which are delivered by pickled surfaces, other designations are delivered by rolled surfaces. 5.2.2 For hot-rolled steel sheets and strips, if the dimensional accuracy is not specified, they will be delivered with ordinary accuracy; if the edge condition is not specified, the steel strips will be delivered in an untrimmed state, and the steel plates will be delivered in a trimmed state.6 Size, Shape, Weight and ToleranceThe size, shape, weight and tolerance of steel sheet and strips shall comply with the provisions of Q/BQB 301.The tolerance of thickness shall comply with the provisions of Table 2 in Q/BQB 301.The allowable value of unevenness shall not exceed the specified minimum yield strength of 300MPa.7 Technical Requirements7.1 Designation and chemical composition 7.2 Smelting methods The steel used for steel sheets and strips is killed steel smelted in an oxygen converter. 7.3 Delivery status Steel sheets and strips are delivered in hot-rolled condition. 7.4 Surface treatment methods 7.4.1 The surface treatment methods of steel sheets and strips can be rolled surface and pickled surface. 7.4.2 When steel sheets and strips have hot-rolled pickled surfaces, they are usually supplied with oil. The oil film shall be removable with alkali aqueous solution. Under normal packaging, 7.5 Mechanical and process properties 7.5.1 The performance guarantee period of steel sheets and strips shall comply with the provisions of the corresponding Tables 3, 4 and 5.The performance guarantee period of steel sheets and strips is calculated from the date of completion of product manufacturing. 7.5.2 The mechanical and process properties of steel sheets and strips during the performance guarantee period shall comply with the provisions of the corresponding Tables 3, 4 and 5.When used as raw material for cold rolling, the supplier does not need to conduct the test if the supplier can ensure that the mechanical test is qualified. 7.6 Surface quality 7.6.1 The surface of steel sheets and strips shall not have cracks, scars, folds, bubbles, inclusions and other defects that are harmful to use; and the steel sheets and strips shall not have delamination. There must be no parking spots on the steel sheets and strips on the pickled surface. 7.6.2 Steel sheets and strips are divided into two levels according to surface quality, as shown in Table 6. 7.7 Special requirements 7.7.1 For cold rolling purposes, according to the requirements of the purchaser, the following special requirements can be put forward for the steel strip after negotiation between the supplier and the purchaser and stipulated in the contract. 7.7.2 Other special requirements Table 78 Inspection and Test8.1 The appearance of steel sheets and strips shall be visually inspected. Nominal thickness mm Average crown along the entire length of steel strip a mm Average wedge along the entire length of steel strip a mm 8.2 The size and shape of steel sheets and trips shall be checked with appropriate measuring tools. 8.3 When selecting the specified inspection and test types, the inspection document types shall comply with the provisions of 8.4~8.6. 8.5 Sampling frequency 8.5.1 Sampling frequency for chemical composition analysis Smelting analysis of chemical composition by furnace. 8.5.2 Sampling frequency for mechanical and process properties Steel sheets and strips shall be accepted in batches, and the batch assembly rules for each batch shall comply with the provisions in Table 9. 8.6 Reinspection 8.6.1 If a certain test result does not meet the standard requirements, double the number of specimens will be taken from the same batch for reinspecting of the unqualified item. 8.6.2 If the reinspection results (including all indicators required for the test of the project) are qualified, the entire batch will be qualified. If even one index of the reinspection results (including all indicators required for the test of the project) fails, the reinspection shall be unqualified.9 Packaging, Marking and Inspection DocumentsThe packaging, marking and inspection documents of steel sheets and strips shall comply with the provisions of Q/BQB 300.10 Numerical Rounding RulesThe numerical judgment adopts the rounding and comparison method, and the numerical rounding shall comply with the provisions of GB/T 8170.11 AppendixThe comparison table between this Document and similar designations in relevant standards is shown in Appendix B (informative). Q/BQB 302-2023 BQB ENTERPRISE STANDARD OF BAOSHAN IRON AND STEEL CO., LTD. Replacing Q/BQB 302-2020 Continuously Hot-Rolled Steel Sheet and Strip for Cold Forming Issued on. APRIL 9, 2023 Implemented on. JULY 1, 2023 Issued by. Baoshan Iron and Steel Co., Ltd.Table of ContentsForeword... 3 1 Scope... 4 2 Normative References... 4 3 Terms and Definitions... 5 4 Classification and Code... 5 5 Information Required for Ordering... 6 6 Size, Shape, Weight and Tolerance... 6 7 Technical Requirements... 7 8 Inspection and Test... 10 9 Packaging, Marking and Inspection Documents... 12 10 Numerical Rounding Rules... 12 11 Appendix... 12 Appendix A (Informative) References of Mechanical Properties... 13 Appendix B (Informative) Comparison Table between this Document and Similar Designations in Relevant Standards... 141 ScopeThis Document specifies the size, shape, technical requirements, inspection and testing, packaging, marking and inspection documents of continuously hot-rolled steel sheet and strip for cold forming. This Document applies to the hot-rolled steel strip for cold forming produced by Baoshan Iron and Steel Co., Ltd., as well as the steel sheet cut horizontally and the steel strip cut longitudinally, hereinafter referred to as steel sheet and strip.2 Normative ReferencesThe provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 222-2006 Permissible Tolerances for Chemical Composition of Steel Products GB/T 223 Chemical Analysis Method of Iron, Steel and Alloy (Applicable Parts) GB/T 228.1-2021 Metallic materials - Tensile testing - Part 1.Method of test at room temperature GB/T 232 Metallic materials – Bend test GB/T 2975 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing GB/T 4336 Carbon and low-alloy steel – determination of multi-element contents – Spark discharge atomic emission spectrometric method (routine method) GB/T 8170 Rules of rounding off for numerical values and expression and judgment of limiting values3 Terms and DefinitionsFor the purposes of this Document, there are no terms and definitions apply.4 Classification and Code4.1 The designations, nominal thickness, uses and product categories of steel sheets and strips are shown in Table 1. 4.2 According to the surface treatment method, it is divided into pickled surface and rolled surface.5 Information Required for Ordering5.1 Users need to provide the following information when ordering. 5.2 Omissions in the ordering contract 5.2.1 If the surface treatment method is not specified, except for designations BRC1, BRC2 and BRC3, which are delivered by pickled surfaces, other designations are delivered by rolled surfaces. 5.2.2 For hot-rolled steel sheets and strips, if the dimensional accuracy is not specified, they will be delivered with ordinary accuracy; if the edge condition is not specified, the steel strips will be delivered in an untrimmed state, and the steel plates will be delivered in a trimmed state.6 Size, Shape, Weight and ToleranceThe size, shape, weight and tolerance of steel sheet and strips shall comply with the provisions of Q/BQB 301.The tolerance of thickness shall comply with the provisions of Table 2 in Q/BQB 301.The allowable value of unevenness shall not exceed the specified minimum yield strength of 300MPa.7 Technical Requirements7.1 Designation and chemical composition 7.2 Smelting methods The steel used for steel sheets and strips is killed steel smelted in an oxygen converter. 7.3 Delivery status Steel sheets and strips are delivered in hot-rolled condition. 7.4 Surface treatment methods 7.4.1 The surface treatment methods of steel sheets and strips can be rolled surface and pickled surface. 7.4.2 When steel sheets and strips have hot-rolled pickled surfaces, they are usually supplied with oil. The oil film shall be removable with alkali aqueous solution. Under normal packaging, 7.5 Mechanical and process properties 7.5.1 The performance guarantee period of steel sheets and strips shall comply with the provisions of the corresponding Tables 3, 4 and 5.The performance guarantee period of steel sheets and strips is calculated from the date of completion of product manufacturing. 7.5.2 The mechanical and process properties of steel sheets and strips during the performance guarantee period shall comply with the provisions of the corresponding Tables 3, 4 and 5.When used as raw material for cold rolling, the supplier does not need to conduct the test if the supplier can ensure that the mechanical test is qualified. 7.6 Surface quality 7.6.1 The surface of steel sheets and strips shall not have cracks, scars, folds, bubbles, inclusions and other defects that are harmful to use; and the steel sheets and strips shall not have delamination. There must be no parking spots on the steel sheets and strips on the pickled surface. 7.6.2 Steel sheets and strips are divided into two levels according to surface quality, as shown in Table 6. 7.7 Special requirements 7.7.1 For cold rolling purposes, according to the requirements of the purchaser, the following special requirements can be put forward for the steel strip after negotiation between the supplier and the purchaser and stipulated in the contract. 7.7.2 Other special requirements Table 78 Inspection and Test8.1 The appearance of steel sheets and strips shall be visually inspected. Nominal thickness mm Average crown along the entire length of steel strip a mm Average wedge along the entire length of steel strip a mm 8.2 The size and shape of steel sheets and trips shall be checked with appropriate measuring tools. 8.3 When selecting the specified inspection and test types, the inspection document types shall comply with the provisions of 8.4~8.6. 8.5 Sampling frequency 8.5.1 Sampling frequency for chemical composition analysis Smelting analysis of chemical composition by furnace. 8.5.2 Sampling frequency for mechanical and process properties Steel sheets and strips shall be accepted in batches, and the batch assembly rules for each batch shall comply with the provisions in Table 9. 8.6 Reinspection 8.6.1 If a certain test result does not meet the standard requirements, double the number of specimens will be taken from the same batch for reinspecting of the unqualified item. 8.6.2 If the reinspection results (including all indicators required for the test of the project) are qualified, the entire batch will be qualified. If even one index of the reinspection results (including all indicators required for the test of the project) fails, the reinspection shall be unqualified.9 Packaging, Marking and Inspection DocumentsThe packaging, marking and inspection documents of steel sheets and strips shall comply with the provisions of Q/BQB 300.10 Numerical Rounding RulesThe numerical judgment adopts the rounding and comparison method, and the numerical rounding shall comply with the provisions of GB/T 8170.11 AppendixThe comparison table between this Document and similar designations in relevant standards is shown in Appendix B (informative). ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of Q/BQB 302-2023 be delivered?Answer: The full copy PDF of English version of Q/BQB 302-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of Q/BQB 302-2023_English with my colleagues?Answer: Yes. The purchased PDF of Q/BQB 302-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- Q/BQB 302-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version Q/BQB 302-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version Q/BQB 302-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of Q/BQB 302-2023?A step-by-step guide to download PDF of Q/BQB 302-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "Q/BQB 302-2023". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
