NY/T 738-2020 English PDFUS$149.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. NY/T 738-2020: (Soybean combine harvester operation quality) Status: Valid NY/T 738: Historical versions
Basic dataStandard ID: NY/T 738-2020 (NY/T738-2020)Description (Translated English): (Soybean combine harvester operation quality) Sector / Industry: Agriculture Industry Standard (Recommended) Classification of Chinese Standard: B91 Word Count Estimation: 6,691 Date of Issue: 2020-07-27 Date of Implementation: 2020-11-01 Older Standard (superseded by this standard): NY/T 738-2003 Regulation (derived from): Announcement No. 319 of the Ministry of Agriculture and Rural Affairs Issuing agency(ies): Ministry of Agriculture and Rural Affairs NY/T 738-2003: Operation quality of soybean combine harvester---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Operation quality of soybean combine harvester ICS 65.060.50 B91 People's Republic of China Agricultural Industry Standard Soybean combined harvesting machine operation quality Released on December 12,.2003 2004-03-01 implementation Published by the Ministry of Agriculture ContentForeword I 1 Scope 1 2 Normative references 1 3 job quality indicator 1 4 job quality testing method 1 5 Inspection rules 2ForewordThis standard was proposed by the Agricultural Mechanization Management Department of the Ministry of Agriculture. This standard is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee Agricultural Mechanization Subcommittee. This standard is mainly drafted by. Agricultural Machinery Bureau of Heilongjiang Provincial Agricultural Reclamation Bureau, Engineering College of Heilongjiang Bayi Agricultural University, Jiangsu Agricultural Machinery Test Identification station. The main drafters of this standard. Wang Zhimin, Zhuang Weidong, Wang Chun, Li Daofeng, Chen Bi'an. Soybean combined harvesting machine operation quality1 ScopeThis standard specifies the quality indicators, testing methods and inspection rules for soybean combined harvesting machinery. This standard applies to the quality assessment of soybean combined harvesting machinery operations.2 Normative referencesThe terms in the following documents become the provisions of this standard by reference to this standard. All dated references are followed by Modifications (not including errata content) or revisions do not apply to this standard, however, research that encourages agreements based on this standard is No, the latest version of these files can be used. For undated references, the latest edition applies to this standard. GB/T 8097 harvesting machine combine harvester test method3 job quality indicators3.1 Working conditions The conditions of the working plots should meet the agricultural technical requirements for mechanical harvesting operations, and soybean combined harvesting should be carried out in time for the soybean maturity. Soybeans do not fall, and the grain moisture content is between 13% and 15%. 3.2 Quality indicators When the operating conditions are in accordance with the provisions of 3.1, the quality of soybean combined harvesting machinery operations shall comply with the requirements of Table 1. Table 1 Quality indicators of soybean combined harvesting machinery Serial number item quality index 1 Total loss rate/(%) ≤ 3 2 impurity ratio/(%) ≤ 5 3 breaking rate/(%) ≤ 54 job quality testing methods4.1 Total loss rate After harvesting, the plots are taken at five points according to the five-point method, and each point is drawn along the advance direction of the combine harvester by a length of 1 m (the cut width is greater than At 2m, the length is 0.5m), the width is the sampling area of the working width of the machine, and all the seeds and pods are collected in the sampling area to get all The lost beans are weighed and converted into soybean losses per square meter. Based on the quality of the harvested soybeans and the corresponding harvested area Calculate the amount of soybeans per square meter. Calculate the total loss rate according to equation (1). Ps= WssWsh+Wss× 100% (1) In the formula. Ps---total loss rate; Wss---the amount of soybean loss per square meter, in grams per square meter (g/m2); Wsh---the amount of soybeans per square meter, in grams per square meter (g/m2). The average value of the total loss rate of the five measurement points was obtained as a quality index. 4.2 impurity content Five samples were randomly selected from the harvested seeds of the combine harvester, and each batch was not less than.2000 g. Soybean sample obtained ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NY/T 738-2020_English be delivered?Answer: Upon your order, we will start to translate NY/T 738-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of NY/T 738-2020_English with my colleagues?Answer: Yes. The purchased PDF of NY/T 738-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version NY/T 738-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version NY/T 738-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
