NY/T 650-2013 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
NY/T 650-2013: Operating quality for sprayers
Status: Valid

NY/T 650: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
NY/T 650-2013	209	Add to Cart	3 days	Operating quality for sprayers	Valid
NY/T 650-2002	319	Add to Cart	3 days	Sprayer () job quality	Obsolete

Similar standards

LY/T 3022   GB/T 2818   SL 470   NY/T 645   NY/T 648   NY 643   

Basic data

Standard ID: NY/T 650-2013 (NY/T650-2013)
Description (Translated English): Operating quality for sprayers
Sector / Industry: Agriculture Industry Standard (Recommended)
Classification of Chinese Standard: B91
Classification of International Standard: 65.060.40
Word Count Estimation: 8,841
Older Standard (superseded by this standard): NY/T 650-2002
Quoted Standard: GB 4285; GB 10395.6; JB/T 9782-1999
Regulation (derived from): Department of Agriculture Bulletin No. 1988
Issuing agency(ies): Ministry of Agriculture of the People's Republic of China
Summary: This standard specifies the quality requirements sprayer (control) operation, testing methods and inspection rules. This standard applies to the sprayer (control) were assessed Ground Conventional spray volume, low volume and ultra low volume spray spray

NY/T 650-2002: Sprayer () job quality

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Sprayer () job quality ICS 65.060.40 B91 People's Republic of China Agricultural Industry Standard Sprayer (worker) Released on December 12,.2002 2003-03-01 implementation Published by the Ministry of Agriculture

Foreword

This standard was proposed by the Agricultural Mechanization Management Department of the Ministry of Agriculture. This standard is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee Agricultural Mechanization Subcommittee. This standard was drafted. National Plant Protection Machinery Quality Supervision and Inspection Center, Institute of Plant Protection, Chinese Academy of Agricultural Sciences, National Agricultural Technology Promotion Service Center. The main drafters of this standard. Tan Benxi, Wang Zhongqun, Yuan Huizhu, Zhao Qing, Zhang Zhaochun, Zhou Yunwu. Sprayer (worker)

1 Scope

This standard specifies the quality indicators, testing methods and inspection rules for sprayer (machine) operations. This standard applies to the sprayer (device) for the ground mass spray, low volume spray and ultra low spray operation quality assessment.

2 Normative references

The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB 4285 safe use of pesticides GB 10395.6-1999 Safety requirements for agricultural and forestry tractors and machinery - Part 6. Plant protection machinery JB/T 9782-1999 General test method for plant protection machinery

3 Terms and definitions

The following terms and definitions apply to this standard. 3.1 Conventional spray A spray of not less than 450L per hectare. 3.2 Low volume spray The amount of fluid applied per hectare is less than 450L and is greater than 7.5L of spray. 3.3 Ultra low volume spray A spray of no more than 7.5 L per hectare. 3.4 Working width Orthogonal to the effective spray width in the direction of advancement of the job. 3.5 Liquid coverage The area of the conventional amount spray covering the crop leaf surface as a percentage of the total area of the leaf surface. 3.6 Droplet deposition density Low spray and ultra low spray deposition of droplets per unit area of the crop. 3.7 Fog distribution uniformity The uniformity of the distribution of the sprayed droplets on the surface of the work area. Note. Uniformity is expressed by the coefficient of variation. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of NY/T 650-2013_English be delivered?

Answer: Upon your order, we will start to translate NY/T 650-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of NY/T 650-2013_English with my colleagues?

Answer: Yes. The purchased PDF of NY/T 650-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version NY/T 650-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version NY/T 650-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.