NB/T 11434.3-2023 English PDFUS$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. NB/T 11434.3-2023: Paste filling in coal mine - Part 3: Effect evaluation method Status: Valid
Basic dataStandard ID: NB/T 11434.3-2023 (NB/T11434.3-2023)Description (Translated English): Paste filling in coal mine - Part 3: Effect evaluation method Sector / Industry: Energy Industry Standard (Recommended) Classification of Chinese Standard: D15 Classification of International Standard: 73.020 Word Count Estimation: 10,116 Date of Issue: 2023-12-28 Date of Implementation: 2024-06-28 Issuing agency(ies): National Energy Administration NB/T 11434.3-2023: Paste filling in coal mine - Part 3: Effect evaluation method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 73.020 CCSD15 Energy Industry Standards of the People's Republic of China Coal mine paste filling Part 3.Effect evaluation methods Released on 2023-12-28 2024-06-28 implementation The National Energy Administration released Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Design requirements for backfill mining 2 5 Quality Control Requirements 3 6 Safety technical requirements 3 7 Technical effect evaluation method 3ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is part 3 of NB/T 11434 Paste filling in coal mines. NB/T 11434 has been published in the following parts. --- Part 1.Technical requirements for isolation of goaf areas in fully mechanized mining working faces; --- Part 2.General technical requirements for pipes and valves; --- Part 3.Effect evaluation method; --- Part 5.Technical requirements for cementitious materials. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Coal Industry Association. This document is under the jurisdiction of the Standardization Expert Group of China Coal Industry Association. This standard was drafted by. Shandong Kanger Energy Technology Co., Ltd., China University of Mining and Technology, Zaozhuang Mining (Group) Co., Ltd. Coal mine, Binxian Coal Co., Ltd., Xuzhou Qingjie Intelligent Mining Technology Co., Ltd., and China Coal Industry Association Productivity Promotion Center. The main drafters of this document are. Sun Xikui, Li Xiushan, Chang Qingliang, Shi Xianyuan, Zuo Jinzhong, Zhang Jinkui, Zhang Xizhai, Liu Guoli, Zhang Biao, Wang Yiqing, Zhang Tao, Che Fengying, Xuan Zhaojun, Zhang Jianfeng, Bi Zhiqiang, Liu Chengmao, Liu Baozhen, Shen Haidong, Xu Chunhua, Ma Changjun, Wang Yunlong, Lü Guoran, Wang Zhipeng, Yang Yang, Liu Lei, and Li Tao.IntroductionNB/T 11434 is a standard for coal mine filling mining jointly issued by the National Energy Administration, the Ministry of Finance, the Ministry of Land and Resources, and the Ministry of Environmental Protection. Based on the document "Guiding Opinions on Coal Production", in order to promote the reform of coal production mode, solve the problems of "three under" (under buildings, under railways, under water bodies, etc.) coal pressure and It is compiled to address the mining issues of marginal coal and residual coal, improve the level of coal resource development and utilization, improve the mining environment, and promote the healthy development of the coal industry. This document provides standardized guidance for coal mining enterprises implementing paste filling mining. Other parts will be adjusted according to the implementation of the standard. It is supplemented that this document is intended to consist of six parts. --- Part 1.Technical requirements for isolation of goaf in fully mechanized mining face. The purpose is to Effectively isolate the goaf during filling to prevent slurry leakage and slurry leakage accidents caused by unsatisfactory isolation, which would threaten the filling opening. The mining is carried out safely to ensure the filling effect. --- Part 2.General technical requirements for pipes and valves. The purpose is to standardize the design and selection of pipes and valves for coal mine paste filling and ensure that the filling pipes The installation and use of key pipe valves at the road connection are reliable, which is conducive to the safe transportation of coal mine filling materials. --- Part 3.Effect evaluation method. The purpose is to summarize the filling mining system and process, various filling parameters and surface deformation observation. Measure the value and judge whether the filling mining meets the design requirements. --- Part 4.Technical requirements for aggregates. The purpose is to standardize the classification, selection and use of aggregates for paste filling. It provides a basis for system design, selection of key equipment, and preparation of paste filling materials. --- Part 5.Technical requirements for cementitious materials. The purpose is to standardize the types and technical requirements of cementitious materials used for paste filling, and ensure Paste pipeline transportation safety, underground filling body connection and filling body strength design requirements. --- Part 6.Technical requirements for support in the waiting area. The purpose is to improve the standardization and reliability of support in the waiting area and to ensure the safety of personnel in the waiting area. Operation safety and ventilation system reliability; clarify the support methods, design requirements, and operation processes of the waiting area to reduce the subsidence of the roof before filling. Improve the surface control effect, reduce the difficulty of working face roof management; ensure the integrity of the roof in the charging area, thereby improving the isolation effect and work efficiency. Coal mine paste filling Part 3.Effect evaluation methods1 ScopeThis document specifies the filling mining design requirements, quality control requirements, safety technical requirements, technical requirements, and Methods for evaluating the effect of surgery. This document is applicable to the evaluation of the effectiveness of paste filling mining technology in coal mines.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 39834 Technical requirements for comprehensive mechanized paste bag filling coal mining NB/T 51070 Test methods for coal mine paste filling materials NB/T 51071 Monitoring technology and methods for coal mine paste filling Coal Mine Safety Regulations Specifications for coal pillars and compressed coal mining in buildings, water bodies, railways and main shafts3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Paste filling mining pasteback filming The solid waste such as gangue and fly ash is processed into a paste-like slurry with no critical flow rate, and then transported to the Coal mining face, timely filling of goaf, no dehydration of filling body after solidification, control of rock movement and ground subsidence, liberation of "three down" coal pressure and A type of mining method for resource utilization of solid waste. 3.2 Paste filling materials In paste filling mining, broken coal gangue, fly ash, slag, construction waste, aeolian sand, river sand, loess, tailings and other materials are mixed with glue. The harmless paste slurry is made by mixing the solidifying material and water (including additives or admixtures) in appropriate proportions, stirring them evenly, and then filling them into the goaf. Material. 3.3 paste-filingbody The solidified paste filling material remaining in the goaf. 3.4 Evaluation areaevaluationarea The impact range of filling mining to be evaluated includes tunnels, chambers, shafts and other tunnel facilities, buildings (structures), railways, water bodies and other surface areas. Areas where features and other protected objects that require assessment are located. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 11434.3-2023_English be delivered?Answer: Upon your order, we will start to translate NB/T 11434.3-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of NB/T 11434.3-2023_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 11434.3-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
