NB/T 10341.2-2019 English PDF
Basic dataStandard ID: NB/T 10341.2-2019 (NB/T10341.2-2019)Description (Translated English): (Code for design of hoist of hydropower project. Part 2: Code for design of mobile hoist) Sector / Industry: Energy Industry Standard (Recommended) Classification of Chinese Standard: P26 Word Count Estimation: 187,155 Date of Issue: 2019-12-30 Date of Implementation: 2020-07-01 Issuing agency(ies): National Energy Administration NB/T 10341.2-2019: (Code for design of hoist of hydropower project. Part 2: Code for design of mobile hoist)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Code for Design of Hoists for Hydropower Projects Part 2.Code for Design of Mobile Hoists Energy Industry Standards of the People's Republic of China Replace DL/T 5167-2002 Design specification for hoist of hydropower project Part 2.Design specification for mobile gate hoist 2019-12-30 released 2019-07-01 Implementation Issued by the National Energy Administration ForewordAccording to the "Notice of the General Office of the National Development and Reform Commission on Printing and Distributing the.2006 Industry Standard Project Plan" (issued Regarding the requirements of restructuring industry (2006, 1093), the normative team has conducted extensive investigations and studies, and carefully summarized practical experience. With reference to relevant domestic standards, and on the basis of extensive solicitation of opinions, this specification is revised. The main technical content of this code is. basic regulations, design principles and requirements, loads, materials, machinery, Structure, electrical and safety. The main technical content of this specification revision is. This code replaces the mobile hoist in the "Design Code for Hydropower and Water Conservancy Engineering Hoist" DL/T 5167-2002 Related content of machine design. --Added the requirements for the safety monitoring and management system and the online monitoring system for the hoist. --- Increase the type and requirements of the operating mechanism of the trolley under the inclined pulling condition of the hoist. --- Increased rail-biting prevention measures when the gate hoist runs along the curved track. --Added the relevant regulations for the multi-layer winding drum of the gate hoist. --Added the load classification of the gate hoist. --Added the relevant regulations on the use of closed gear transmission for each mechanism of the gate hoist. --- Increased the technical requirements for wire rope pre-tensioning and twisting direction. --Added the relevant content of the safety brake. --- Increased the calculation requirements for component stability. -Added a "Security" chapter. --Adjusted the principle of dividing the work level of hoist. --Adjusted the static strength calculation load factor of the high-speed shaft components of the hoisting mechanism. --Adjusted the content of the "Electrical" chapter. --Modified the control requirements of the relevant angles when the steel wire rope is wound in multiple layers. --Modified the material requirements for structural parts. This specification is managed by the National Energy Administration, proposed by the General Institute of Hydropower and Water Conservancy Planning and Design, and is responsible for daily management. The technical committee for standardization of metal structures and hoists in the energy industry is responsible for the interpretation of specific technical content. Hold on If you have any comments or suggestions during the trip, please send them to the General Institute of Hydropower and Water Conservancy Planning and Design (Address. Sixth, Xicheng District, Beijing) Shop No. 2 Kangbei Xiaojie (Postal code. 100120). Editor-in-chief of this code. Northwest Survey, Design and Research Institute Co., Ltd. of China Power Construction Corporation Participating unit of this specification. China Power Construction Group Chengdu Survey and Design Research Institute Co., Ltd. China Water Resources and Hydropower Jiajiang Hydraulic Machinery Co., Ltd. General Institute of Hydropower and Water Conservancy Planning and Design The main drafters of this specification. Liao Yongping, Jia Gang, Zhu Zengbing, Yao Changjie, Gong Jianxin, Yang Fang Zhao Qingjing Li Gang Fang Hanmei Jiang Decheng Xu Shaobo Feng Hanfu Zhao Chunlong Wei Chenyang Chen Guanhua Cui Jiazhong Wang Xiaohui Tan Daki Chen Xiangnan Yu Yingbin Fan Rugu Ren Guoliang Zou Jinchun Gao Yang Zhao Cheng Wu Siguo Jiang Congjun Tian Fang Zhang Chao Main reviewers of this code. Lin Zhaohui, Hu Baowen, Yuan Changsheng, Tan Shoulin, Chen Xia, Lu Wei Zhao Fuxin Wei Wenwei Hu Shuangtian Liu Shuyu Yu Xiquan Liu Chunqing Luo Wenqiang Wu Xiaoning Zheng Xianghui Tao Yundong Chu Xiaozhao Wang Dandi Li ShishengTable of contents1 General...1 2 Terminology...2 3 Basic regulations...3 4 Design principles and requirements...5 4.1 General layout...5 4.2 Mechanism Design...6 4.3 Windproof and anti-skid calculation...8 4.4 Anti-corrosion...9 5 Load...11 5.1 Conventional load...11 5.2 Incidental load...12 5.3 Special loads...14 5.4 Other loads...15 6 Materials...16 6.1 Casting...16 6.2 Forgings and rolled parts...16 6.3 Structural parts...16 6.4 Connecting materials...17 7 Machinery...18 7.1 Lifting mechanism...18 7.2 Operating mechanism...20 7.3 Slewing mechanism...22 7.4 Calculation principles of components...24 7.5 Design of components...26 8 Structure...35 8.1 Calculation principle...35 8.2 Load combinations...35 8.3 Allowable stress...36 8.4 Strength calculation of structural parts and connections...37 8.5 Stability calculation...40 8.6 Stiffness requirements...47 8.7 Door frame structure...48 8.8 Construction requirements...49 9 Electrical...54 9.1 General provisions...54 9.2 Power and power supply...54 9.3 Power Distribution System...55 9.4 Electrical protection...55 9.5 Electrical Control...57 9.6 Working environment of electrical equipment...61 9.7 Wires and cables and their laying...61 9.8 Hydraulic automatic hanging off beam...63 9.9 Auxiliary electrical equipment...64 10 Security...65 10.1 Basic safety requirements...65 10.2 Structural safety requirements...66 10.3 Mechanical safety requirements...68 10.4 Electrical safety requirements...69 10.5 Safety and arrangement of control and manipulation...69 10.6 Requirements for the setting of safety protection devices...70 10.7 Fire...71 10.8 Use maintenance files...71 Appendix A Series Parameters of Rated Hoisting Load, Head, Span and Speed...72 Appendix B Running acceleration and deceleration and corresponding acceleration and deceleration time...73 Appendix C Windward Area and Wind Coefficient...74 Appendix D Calculation of horizontal lateral load when hoisting gear is operating in skewed operation...79 Appendix E Motor Selection...82 Appendix F Motor overload check...87 Appendix G Thermal Calibration of Motor...89 Appendix H Mechanical Transmission Efficiency...91 Appendix J Calculation of Running Friction Resistance and Ramp Resistance...92 Appendix K Calculation of Parts...94 Appendix L Allowable values of commonly used sliding bearing materials...0 Appendix M Stability Coefficient of Axial Compression Components...1 Appendix N Lateral Buckling Stability Coefficient of Bending Members...8 Appendix P Overall stability calculation of compression-bending members...11 Appendix Q Calculation of Local Stability of Plate...14 Appendix R Correction Coefficient of Conductor Ampacity...21 Explanation of terms used in this specification...23 List of Reference Standards...24 Attachment. Article description...271 General1.0.1 In order to standardize the design of mobile hoist for hydropower projects, this code is formulated. 1.0.2 This code applies to hydropower projects that are mainly driven by electricity and run on tracks for opening and closing gates and blocking pollution. Mobile hoist design for grid and equipment maintenance. 1.0.3 The design of mobile hoist for hydropower projects shall not only conform to this code, but also conform to the current relevant national standards Provisions.2 term2.0.1 mobile hoist Driven by a motor and driven by gears, the gates, trash racks and inspections are opened and closed via the reel, pulley block and lifting parts. Repairing equipment, moving on rails and other cyclic operations machinery. Mobile hoist is divided into door hoist, trolley hoist Shut-down and bridge hoist and other types. 2.0.2 supporting brake A mechanical normally closed brake for braking and stopping is set on the high-speed shaft of the reducer. 2.0.3 safety brake A mechanical normally closed brake that plays a braking role is set on the reel device. 2.0.4 closed gear transmission The gear pairs at all levels from the motor to the reel shaft are in a closed box and have a well-lubricated transmission. 2.0.5 broken line groove drum Each pitch rope groove is crossed by a rope groove parallel to a plane perpendicular to the axis of the reel and a plane perpendicular to the axis of the reel. A reel with alternating angular rope grooves. 2.0.6 duty class Consider the changes in load, the utilization of working hours and the nature of gate work, and determine the characteristics of the hoist. 2.0.7 automatic lifting beam A device that can automatically connect and disconnect gates and hoists.3 Basic regulations3.0.1 During the design of the gate hoist and its parts, the working level of the gate hoist and its components shall be divided, including the whole Machine classification and institutional classification. 3.0.2 The use level of the gate hoist shall meet the requirements of Table 3.0.2-1;... ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of NB/T 10341.2-2019_English be delivered?Answer: Upon your order, we will start to translate NB/T 10341.2-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of NB/T 10341.2-2019_English with my colleagues?Answer: Yes. The purchased PDF of NB/T 10341.2-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
