MT 186-1988 English PDF

US$199.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
MT 186-1988: (Scraper conveyor face to analyze the basic parameters of the cable trough)
Status: Obsolete

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
MT 186-1988	199	Add to Cart	2 days	(Scraper conveyor face to analyze the basic parameters of the cable trough)	Obsolete

Similar standards

MT/T 716   MT/T 661   MT 76   MT/T 717   MT 233   

Basic data

Standard ID: MT 186-1988 (MT186-1988)
Description (Translated English): (Scraper conveyor face to analyze the basic parameters of the cable trough)
Sector / Industry: Coal Industry Standard
Classification of Chinese Standard: D93
Word Count Estimation: 2,265
Date of Issue: 4/13/1988
Date of Implementation: 8/1/1988
Regulation (derived from): People's Republic of China State Development & Reform Commission Notice 2004 No. 51

MT18:

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Scraper conveyor face to analyze the basic parameters of the cable trough) Ministry of Coal Industry Standards MT/T 186-88 Slot conveyor cable trough for working surface Basic parameters 1988-04-13 ratified 1988-08-01 implementation Approved by the Ministry of Coal Industry of the People's Republic of China

Contents

1 Scope of application 1 2 Normative references 1 3 Basic parameters 1 Slot conveyor cable trough for working surface Basic parameters

1 Application

This standard applies to cable troughs (hereinafter referred to as cable troughs) for scraper conveyors in coal mine underground working surfaces.

2 Reference standards

MT 117 cable clamp basic dimensions

3 Basic parameters

3.1 The width of the cable trough should meet the requirements of the following figure and Table 1. 3.2 The depth of the cable trough should meet the requirements of the figure above and Table 2. Note. Newly designed products must not use bracketed values. 3.3 The basic dimensions of the cable clamp plate shall comply with the provisions of MT 117. Additional information. This standard is proposed by the Technology Development Department of the Ministry of Coal Industry. This standard is under the jurisdiction of the Taiyuan Branch of the Coal Research Institute. This standard was drafted by the Taiyuan Branch of the Coal Science Research Institute. The main drafter of this standard is Cheng Xinzhong. This standard entrusts Taiyuan Branch of Coal Science Research Institute with interpretation. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of MT 186-1988_English be delivered?

Answer: Upon your order, we will start to translate MT 186-1988_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of MT 186-1988_English with my colleagues?

Answer: Yes. The purchased PDF of MT 186-1988_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.