LY/T 3226-2020 English PDFUS$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 3226-2020: Oriented strand board for container flooring Status: Valid
Basic dataStandard ID: LY/T 3226-2020 (LY/T3226-2020)Description (Translated English): Oriented strand board for container flooring Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B70 Classification of International Standard: 79.060.20 Word Count Estimation: 14,120 Date of Issue: 2020-12-29 Date of Implementation: 2021-06-01 Regulation (derived from): Announcement No. 25 (2020) of the State Forestry and Grassland Administration Issuing agency(ies): State Forestry and Grassland Administration LY/T 3226-2020: Oriented strand board for container flooring---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Oriented strand board for container flooring People's Republic of China Forestry Industry Standard Oriented strand board for container bottom plate 2020-12-29 release 2021-06-01 implementation State Forestry and Grassland Administration ForewordThis document is in accordance with GB/T 1.1-2020 "Guidelines for Standardization Part 1.Structure and Drafting Rules of Standardization Documents" Drafting of the rules given in the Rules. Appendix A of this document is a normative appendix. Please note that some of the contents of this document may involve patents. Publication of this document The agency is not responsible for identifying these patents Ren. This document was proposed and managed by the National Wood-based Panel Standardization Technical Committee (SAC/TC 198). Drafting organizations of this document. Nanjing Forestry University, Jiangsu Happy Wood Group Co., Ltd., Hubei Kangxin New Material Technology Co., Ltd. Limited Liability Company, Dehua Rabbit Baby Decoration New Material Co., Ltd., Shouguang Luli Wood Industry Co., Ltd., Hubei Fuhan Wood Industry (Group) Development Co., Ltd., Millennium Boat New Material Technology Group Co., Ltd., Fujian Heqichang Bamboo Industry Co., Ltd. Company, Canoway Group Co., Ltd. The main drafters of this document. Mei Changtong, Zhou Xiaoyan, Xu Xinwu, Pan Mingzhu, Li Wanzhao, Huang Runzhou, Xu Bin, Wang Dao Jiang, Li Jie, Zhan Xianxu, Guo Zhiwu, Li Wending, Liu Hao, Yu Xianlu, Zheng Haitao. This document was published for the first time. Oriented strand board for container bottom plate1 ScopeThis document specifies the terms and definitions, requirements, inspection methods, inspection rules and Identification, packaging, transportation and storage. This document is applicable to Oriented Strand Board for container floor.2 Normative referencesThe contents of the following documents constitute indispensable clauses of this document through normative references in the text. Among them, dated For reference documents, only the dated version applies to this document; for undated reference documents, the latest version (including all Some amendments) apply to this document. GB/T 2828.1-2012 Sampling inspection procedures by attributes Part 1.Batch-by-batch sampling inspection searched by acceptance quality limit (AQL) plan GB/T 17657-2013 Test method for physical and chemical properties of wood-based panels and facing wood-based panels GB/T 18259-2018 Artificial board and its surface decoration terms GB/T 19367-2009 Determination of the size of wood-based panels GB/T 19536-2015 Plywood for container floor3 Terms and definitionsThe following terms and definitions defined in GB/T 18259-2018 apply to this document. 3.1 Oriented strand board (OSB) After applying the adhesive, the narrow and long thin flat shavings are arranged in the same direction in the same layer and laid in the same direction, and then hot-pressed. Flower board. Referred to as OSB. [GB/T 18259-2018, definition 3.3.22] 3.2 Oriented strand board for container flooring Oriented strand board with certain weather resistance and load-bearing capacity is used to manufacture the core material of the composite container bottom plate. General Use phenolic resin or isocyanate resin or adhesive with equivalent performance. The density is usually greater than 750kg/m3.4 requirements4.1 Specification size, size deviation and density deviation 4.1.1 Common format specifications. 1200mm×2400mm, 1220mm×2440 mm. It can also be produced according to the agreement between the supplier and the demander Produce. 4.1.2 Thickness specifications. 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, 24mm. Can also double according to supply and demand Party agreed to produce. 4.1.3 Product size deviation and density deviation should meet the requirements of Table 1. 4.2 Appearance quality The appearance quality should meet the requirements of Table 2. 4.3 Physical and mechanical properties The physical and mechanical properties should meet the requirements of Table 3.5 Inspection method5.1 Apparatus 5.1.1 Micrometer, the graduation value is 0.01mm. 5.1.2 Vernier caliper, graduation value 0.02mm. 5.1.3 Steel tape, with an graduation value of 1.0mm. 5.1.4 Balance with a sense of 0.01g. 5.2 Sampling and test pieces 5.2.1 Take samples as specified in Section 7. 5.2.2 Saw three samples according to the sample in Figure 1, and indicate the sample number, the position of the upper and lower surfaces and the edge of the board. Each sample According to Figure 2 and Table 4, saw the test piece. Note. In the figure, L represents the length of the sample, and B represents the width of the sample. 5.3 Measurement of dimensional deviation According to the relevant regulations in GB/T 19367-2009. 5.4 Edge straightness determination According to the relevant regulations in GB/T 19367-2009. 5.5 Measurement of verticality According to the relevant regulations in GB/T 19367-2009. 5.6 Determination of moisture content According to the provisions of 4.3 in GB/T 17657-2013.The test piece does not need to be balanced. 5.7 Density determination According to the provisions of 4.2 in GB/T 17657-2013.The test piece does not need to be balanced. 5.8 Determination of static bending strength and elastic modulus According to the provisions of GB/T 17657-2013, 4.7.The test piece does not need to be balanced. 5.9 Determination of internal bond strength According to the provisions of 4.11 in GB/T 17657-2013.The test piece does not need to be balanced. 5.10 24 hours water absorption thickness swelling rate measurement According to the provisions of 4.4 in GB/T 17657-2013.The test piece does not need to be balanced. 5.11 Determination of internal bonding strength after boiling According to the provisions of 4.12 in GB/T 17657-2013.The test piece does not need to be balanced. 5.12 Short-span shear strength determination Determine the short-span shear strength according to the method in Appendix A. The test piece does not need to be balanced.6 Result calculation and judgment method6.1 Result calculation 6.1.1 Average The average value of a board is the arithmetic average of the test values of n test pieces in the board, calculated according to formula (2). ̅6.1.2 Find the minimum value among several test pieces of a plate (static bending strength, internal bonding strength, elastic modulus, short span shear strength (Longitudinal)) or maximum value (24 hours water absorption thickness expansion rate). 6.2 Judgment method 6.2.1 The average value of static bending strength, internal bonding strength and elastic modulus, and short span shear strength (longitudinal) of a board must meet. 6.2.2 The arithmetic average of the water absorption thickness expansion rate of a board must meet. 6.2.3 When inspecting multiple boards, each board should meet the requirements of 6.2.1 and 6.2.2, if not, re-inspect according to Article 7.3.1 And judgment. 6.2.4 For other performance indicators that are not specified, only their arithmetic average values are judged.7 Inspection rules7.1 Inspection classification Product inspection is divided into factory inspection and type inspection. 7.1.1 The factory inspection includes the following items. a) Appearance quality; b) Specifications and dimensions; c) Physical and mechanical properties. density deviation, moisture content, water absorption thickness expansion rate, static bending strength, elastic modulus, internal bonding Strength, short span shear strength. 7.1.2 Type inspection is all inspection items required in Chapter 4. During normal production, the type inspection shall not be less than once every six months; when one of the following situations occurs, the type inspection shall be carried out. a) When there are major changes in raw and auxiliary materials and production processes; b) When production has been suspended for more than three months and production is resumed; c) When the quality supervision department proposes type inspection requirements. 7.2 Dimensions The general inspection level in GB/T 2828.1-2012 is II and the acceptance quality limit (AQL) is 4.0. Case, see Table 5. 7.3 Physical and mechanical properties 7.3.1 The physical and mechanical properties shall adopt the re-inspection sampling plan according to Table 6.Take n1 boards for the first time, if an indicator in the test result is not Qualified, then take n2 plates for the second time to re-inspect the unqualified items, and the performance value of the second sample n2 (the unqualified items in n1) must All meet the standard requirements, otherwise the batch of products will be judged as unqualified. 7.3.2 When the factory conducts self-inspection on the physical and mechanical properties of the boards, the number of samples can be 1 per shift. 7.4 Judgment rules When all inspection items are qualified, the batch of products is determined to be a qualified batch, otherwise it is unqualified. 8 Identification, packaging, transportation and storage 8.1 Identification The product shall be affixed with a mark indicating the product name, specifications, production date and inspector code. 8.2 Packaging Products should be properly packaged according to different specifications. Each package should be accompanied by the product name, manufacturer’s name, trademark, regulations Grid size, quantity, implementation standard, moisture-proof and inspection label with qualified seal. 8.3 Transportation and storage The product should be protected from moisture, rain, sun and deformation during transportation and storage.Appendix A(Normative appendix) Short span shear strength measurement method A.1 Test instruments and equipment A1.1 Mechanics universal testing machine, the graduation value is 10N; A1.2 Vernier caliper, graduation value 0.02mm; A1.3 Micrometer, the graduation value is 0.01mm. A.2 Test procedure A.2.1 Record the length, width and thickness of the test piece (accurate to 0.1mm). A.2.2 Adjust the span between the two supports to 10 times the nominal thickness of the test piece, and determine the short span shear strength as shown in Figure A.1. A.2.2.1 The axis of the loading roller should be parallel to the axis of the support roller; A.2.2.2 The diameter of the end face of the loading roller is (30±0.5) mm, and the diameter of the supporting roller is (15±0.5) mm; A.2.2.3 The length of the loading roller and the supporting roller should be greater than the width of the test piece; A.2.2.4 The axis of the loading roller must be perpendicular to the centerline of the long axis of the test piece, and the load should be evenly loaded. The loading speed is 2.0mm/min. Until the specimen is broken, record the maximum breaking load, accurate to 10N. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 3226-2020_English be delivered?Answer: Upon your order, we will start to translate LY/T 3226-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 3226-2020_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 3226-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
