LY/T 2918-2017 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 2918-2017: Soft body impact test method of timber framed walls
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
LY/T 2918-2017	189	Add to Cart	3 days	Soft body impact test method of timber framed walls	Valid

Similar standards

LY/T 2407   GB/T 30762   LY/T 1650   LY/T 3345   LY/T 1773   LY/T 2913   

Basic data

Standard ID: LY/T 2918-2017 (LY/T2918-2017)
Description (Translated English): Soft body impact test method of timber framed walls
Sector / Industry: Forestry Industry Standard (Recommended)
Classification of Chinese Standard: B61
Classification of International Standard: 65.020.40
Word Count Estimation: 8,891
Date of Issue: 2017-10-27
Date of Implementation: 2018-01-01
Regulation (derived from): National Forestry Admistration Notice 2017 No.18; Industry Standard Filing Notice No.12 (Total No.216)
Issuing agency(ies): State Forestry Administration

LY/T 2918-2017: Soft body impact test method of timber framed walls

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Soft body impact test method of timber framed walls ICS 65.020.40 B61 People's Republic of China Forestry Industry Standard Wood frame wall soft weight impact test method Released on.2017-10-27 2018-01-01 implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. Publication of this document The organization does not assume responsibility for identifying these patents. This standard is proposed and managed by the National Timber Standardization Technical Committee Structural Wood Subcommittee (SAC/TC41/SC4). This standard was drafted. Nanjing Forestry University, Shenyang Ziwei Electromechanical Equipment Co., Ltd., Wuxi Jiamu Whole House Co., Ltd., Shanghai Rongjia Wood Structure Housing Engineering Co., Ltd., Shanghai Zhizhong Building Technology Co., Ltd. The main drafters of this standard. Yan Zeli, Wang Feibin, Li Zherui, Zhang Xiaolan, Sun Bo, Wang Liping, Jian Shiwen, Wang Xiaoyu, Yang Xiaojun, Teng Qicheng, Li Pan, Bao Xufeng, Song Muyi. Wood frame wall soft weight impact test method

1 Scope

This standard specifies the test method for the impact performance of soft and heavy objects in wood frame walls. This standard applies to the test of wood frame wall and wood frame wall plate.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 17657 Wood-based panel and finished panel physicochemical properties test method

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Wooden frame wall timberframedwal A frame structure consisting of a specification material or a wood product, at least on one side of which is covered with wood or other material. 3.2 Wooden frame wall with sheet timberframedwalpanel Wood frame wall cladding material, structural or non-structural sheet. 3.3 Soft weight softbody A spherical canvas bag filled with solid glass beads.

4 test methods

4.1 Principle On a predetermined one or several weak parts of the surface of the wall of the wooden frame wall, a soft weight is used to strike perpendicularly to its plane. Test to see if it is damaged. 4.2 Equipment 4.2.1 Adjustable test frame The frame wall of various specifications shall be installed on the test frame, and the clamping device for the test installation shall be provided. Installation method and actual use The installation method in use is similar. The test frame shall have sufficient rigidity (for example, wood-based panels with wood frame walls, see Appendix A) It is guaranteed that the influence of any deformation produced by the equipment in the test on the test results is negligible. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 2918-2017_English be delivered?

Answer: Upon your order, we will start to translate LY/T 2918-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 2918-2017_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 2918-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.