LY/T 2677-2016 English PDF
Basic dataStandard ID: LY/T 2677-2016 (LY/T2677-2016)Description (Translated English): Technical regulation of training and pruning for camellia oleifera Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B66 Classification of International Standard: 65.020.20 Word Count Estimation: 6,692 Date of Issue: 2016-07-27 Date of Implementation: 2016-12-01 Regulation (derived from): State Forestry Administration Announcement No.17 of 2016; Industry Standard Announcement No.16 of 2016 (No.204) Issuing agency(ies): State Forestry Administration LY/T 2677-2016: Technical regulation of training and pruning for camellia oleifera---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.(Technical specification for plastic tea pruning pruning) ICS 65.020.20 B66 People's Republic of China Forestry Industry Standard Oil tea plastic trimming technical regulations Released on.2016-07-27 Implementation of.2016-12-01 State Forestry Administration released ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by Jiangxi Forestry Science and Technology Training Center. This standard is under the jurisdiction of the State Forestry Administration. This standard was drafted. Jiangxi Forestry Science and Technology Training Center, Central South University of Forestry and Technology, China Forestry Academy Subtropical Forestry Experimental Center. The main drafters of this standard. Yu Jiangfan, Wang Sen, Zhong Qiuping, Lu Fangde, Huang Dunyuan, Lan Ping. Oil tea plastic trimming technical regulations1 ScopeThis standard defines the technical terms and definitions of Camellia oleracea, and stipulates the principles of plastic trimming, shaping and trimming, shaping and trimming steps, Plastic trimming technology. This standard applies to the plastic trimming of ordinary oil tea, small fruit oil tea, and Gaozhou oil tea.2 Terms and definitionsThe following terms and definitions apply to this document. 2.1 Go to the foot removeweakanddeadbranches Remove the weak branches and dry branches of the lower part of the Camellia oleifera tree. 2.2 Open skylight thinpartialcanopybranchesforbetterlighting A part of an erect branch of a camellia tree that is removed or retracted from the canopy.3 plastic trimming periodFrom the end of November to the end of February of the following year, combined with winter trimming and shaping. Summer is best from early March to mid-November. 4 Camellia is mainly tree-shaped and trimmed 4.1 Natural round head shape 4.1.1 sapling tree trimming The dry height is 50cm~60cm. At 40cm~50cm, choose 4~5 reasonable branches to cultivate the main branches. At each Select one branch on the main branch to make a side branch. Remove roots in time. 4.1.2 initial result period tree trimming The angle of the main branch is maintained at 55°~65°, and the angle of the side branches is maintained at 60°~70°. The main branches extend the competition branches, erect branches, and sides below 30 cm. The branches are all removed. The competition branches, erect branches, and side branches of the lateral branch extension head 20 cm or less were all removed. On the main branch and side branches, according to the outer small and large inside The principle of cultivating the result branches in turn. Remove roots in time. 4.1.3 Tree trimming during fruiting period Adjust the main branch angle to maintain 55 ° ~ 65 °, the side branch angle is maintained 60 ° ~ 70 °. The crown is handed over, and the main branch and the side branch are no longer cultivated. It is intended to regulate inter-plant and inter-row grafting without overlapping. Note that the result branch group is updated. Remove roots in time. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 2677-2016_English be delivered?Answer: Upon your order, we will start to translate LY/T 2677-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 2677-2016_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 2677-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |