LY/T 1094-2023 English PDFUS$219.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. LY/T 1094-2023: Cone kiln Status: Valid LY/T 1094: Historical versions
Basic dataStandard ID: LY/T 1094-2023 (LY/T1094-2023)Description (Translated English): Cone kiln Sector / Industry: Forestry Industry Standard (Recommended) Classification of Chinese Standard: B91 Classification of International Standard: 65.060.80 Word Count Estimation: 11,185 Date of Issue: 2023-06-19 Date of Implementation: 2023-11-01 Issuing agency(ies): State Forestry and Grassland Administration LY/T 1094-2023: Cone kiln---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 65.060.80 CCSB91 Forestry Industry Standard of the People's Republic of China Replace LY/T 1094-2010 Cone drying machine Released on 2023-06-19 2023-11-01 Implementation The State Forestry and Grassland Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting is required. This document replaces LY/T 1094-2010 "Forestry Machinery Cone Dryer". Compared with LY/T 1094-2010, in addition to the structural adjustment In addition to editorial changes, the main technical changes are as follows. a) Changed the requirements and tests for “dryer preheating time” (see 5.2.1, 5.2.1 of the.2010 edition); b) Added the requirement and test of “the time required for the dryer to heat up” (see 5.2.2); c) Added the requirements and tests for “drying time in dryer” (see 5.2.3); d) Added the requirements and inspections for “dryer moisture exhaust control” (see 5.4.1); e) Added the requirements and inspections for “control of drying machine temperature rise” (see 5.4.2); f) Added the requirements and inspections for “drying control in dryers” (see 5.4.3); g) Added the requirements and inspections for the “program design” of drying machines (see 5.4.4); h) Added the requirements and tests for “control system failure rate” (see 5.4.5); i) Changed the “structure” requirement to “assembly quality” requirement, and deleted some content (see 5.7, 5.3 of the.2010 edition); j) The content of “Inspection Rules” has been deleted (see Chapter 7 of the.2010 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the State Forestry and Grassland Administration. This document is under the jurisdiction of the National Forestry Machinery Standardization Technical Committee (SAC/TC61). This document was drafted by. Harbin Forestry Machinery Research Institute of the State Forestry and Grassland Administration, and the Ecological Restoration Department of Daxinganling Forestry Group Corporation. Technology Promotion Station, Harbin Huaqing General Equipment Manufacturing Co., Ltd. The main drafters of this document are Wu Xiaofeng, Yi Honglei, Xiao Bing, Song Guanghui, Wang Shibin, Li Quangang, Li Zhiru, Zhang Beihang and Han Lizhi. The previous versions of this document and its replacement documents are as follows. ---This document was first published in February.2010; ---This is the first revision. Cone drying machine1 ScopeThis document defines the terms and definitions of cone dryers, gives the basic parameters of cone dryers, and specifies the performance of cone dryers. The requirements for cone dryers as well as marking, instruction manual, packaging, transportation and storage are described, and the model compilation method and test method of cone dryers are described. This document applies to program-controlled cone dryers (hereinafter referred to as dryers) that use hot air as the drying medium and a drying chamber as a shelf structure. design, development, production and testing.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2772 Inspection procedures for forest seeds GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment GB/T 9480 Rules for writing instructions for agricultural and forestry tractors and machinery, lawn and gardening power machinery GB 10395.1 Safety of agricultural and forestry machinery Part 1.General principles GB/T 10820 Thermal efficiency and thermal engineering test methods for domestic boilers GB/T 12467.3 Quality requirements for fusion welding of metallic materials Part 3.General quality requirements JB/T 5673 General technical requirements for painting of agricultural and forestry tractors and implements3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 A machine that uses hot air flow to dry cones and crack the cone scales. 3.2 cone sieve vehicle cone sieve vehicle It is used to hold cones, has a mesh screen at the bottom to facilitate the passage of hot air, and is a grooved movable device with supporting wheels. 3.3 After drying, the mass of pure seeds after wing removal is 100% of the total mass of the cones before entering the dryer (without seed soaking treatment). percentage. 3.4 The percentage of seeds that produce normal seedlings under suitable conditions and within the specified period of time to the total number of seeds tested. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1094-2023_English be delivered?Answer: Upon your order, we will start to translate LY/T 1094-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of LY/T 1094-2023_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1094-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version LY/T 1094-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1094-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
